Stance+ M14x1.5mm 60-degree tapered wheel bolts in zinc plated silver. Grade 10.9 high-tensile steel with a 17mm hex head, precision engineered for secure fitment on Ford, Vauxhall, Kia, Hyundai and Mazda models and any other vehicle specifying an M14x1.5 tapered seat wheel bolt.
The 60-degree tapered seat is the most widely used wheel bolt seat type on aftermarket wheels. The angled profile seats securely into the wheel's tapered bolt holes, centring the wheel correctly and providing reliable clamping force.
The zinc plated silver finish gives a clean, factory-fresh look that complements a wide range of wheel designs. Silver bolts are a natural choice when you want the hardware to blend in rather than stand out, and the zinc plating provides solid corrosion protection for year-round use.
Available in thread lengths from 25mm through to 50mm, covering standard replacement bolts and extended bolts for use with wheel spacers. Working out the right length is straightforward: measure the threaded section of your current factory bolt (most are 25mm or 28mm), then add the width of your spacer. A 5mm spacer with a 25mm stock bolt, for example, needs a 30mm replacement. Always test fit before driving and confirm the bolt does not contact any brake components. If you are fitting Stance+ Wheel Spacers, extended wheel bolts are not optional. They are essential for safety. Standard factory bolts will not provide sufficient thread engagement once a spacer is in place, creating a serious risk of wheel separation. The 35mm to 50mm options in this range are specifically intended for use with spacers of 4mm and above. Never use stock length bolts with spacers, regardless of how thin the spacer is. Sold individually, in packs of 10, or packs of 20. Always torque to manufacturer's specification.
Available thread lengths: 25mm, 30mm, 35mm, 40mm, 45mm and 50mm.