Details
Most coilovers compromise ride quality when run at extremely low ride heights. The Stance+ Proline doesn't. The base-adjustable front struts physically change length rather than running the spring seat to the limit, so your Seat Leon (1P) Hatchback maintains 100% damper travel whether it's sitting at 30mm or 75mm of drop.
Base adjustment is the Proline's defining feature. Where most coilover kits achieve lowering by repositioning the spring seat, the Proline front struts change in physical length. Shorten the strut to go lower, lengthen it to go higher. The result is that your piston rod always has its full stroke available, giving the suspension system everything it needs to do its job properly at any ride height from 30 to 75mm of drop. Adjustment can be done while the kit is on the car.
Underneath the Proline's headline drop numbers is a properly specified damper package. Gas-assisted, oil-filled FUCH dampers uprated around 25-30% over standard, with NOK oil seals for durability and FUCH damper oil for consistent lubricity. Chrome silicon springs are shot-peened for strength and powder-coated black. Powder coated damper bodies complete a kit that's engineered to perform and built to last.
This kit runs fixed uprated damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your Seat Leon (1P) Hatchback to deliver the best balance of performance and road comfort at extreme ride heights.
This is the kit for drivers who don't want to compromise. The Proline's base-adjustable front struts mean your Seat Leon (1P) Hatchback can sit at extreme ride heights and still ride properly, because the piston rod always has its full stroke available. Up to 75mm of drop, full damper travel, zero compromise.
The kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components to protect them and make future height adjustments straightforward. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.
Kit supplied with 55mm front strut diameters.
This Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Seat Leon (1P) (2005-2013) Hatchback. 2WD models only. Fitted with the following engines: 1.2TSi, 1.4, 1.4TSi, 1.8TSi, 2.0TFSi Cupra, 2.0TFSi Cupra R, 2.0TFSi Copa Edition, 2.0TFSi Cupra 310 Limited Edition, 1.6TDi, 1.9TDi, 2.0TDi, 2.0TDi FR.
