Details
Go lower. Go properly low. The Stance+ Proline Coilover Kit for the BMW 3 Series (E92) Coupe uses a unique base-adjustable front strut design that physically shortens or lengthens the coilover unit to achieve extreme ride heights without sacrificing damper travel or ride quality. Up to 75mm of drop on most applications.
The key to the Proline's capability is base adjustment. Rather than simply winding the spring seat down the coilover body, the Proline front struts are adjustable in overall length. The whole unit gets shorter or longer depending on your target ride height, and because the piston rod position relative to the strut body doesn't change, you retain 100% damper travel throughout. Height adjustment is possible while the kit remains fitted to the car.
The Proline's gas-assisted, oil-filled dampers are filled with FUCH oil and fitted with NOK oil seals throughout. Damping rates are set approximately 25-30% above factory, giving a noticeably sportier character without punishing harshness. The gas assistance adds a progressive, refined feel to the damping response, keeping the car composed at extreme ride heights where the suspension geometry is working harder.
This kit runs fixed uprated damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your BMW 3 Series (E92) Coupe to deliver the best balance of performance and road comfort at extreme ride heights.
Coupes look their best when they're sitting properly low. The Proline kit takes your BMW 3 Series (E92) there, with up to 75mm of base-adjustable drop and a ride quality that holds up even at extreme ride heights thanks to the full damper travel design.
The kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.
This Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: BMW 3 Series (E92) (2005-2013) Coupe. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316D, 318D, 320D, 325D, 330D. Excluding X-Drive. Excluding M3.
