Details
Every Stance+ Proline Coilover Kit is designed and engineered in the UK, with each unit inspected throughout the build process. The Proline is our flagship kit for the BMW 3 Series (E91) Touring, built around a base-adjustable design that delivers up to 75mm of drop while maintaining 100% piston rod travel at every ride height setting.
The base-adjustable design is what sets the Proline apart from conventional coilovers. On a standard kit, lowering is achieved by moving the spring seat down the shock body, which eventually limits damper travel and compromises ride quality. The Proline works differently. The front strut physically shortens or lengthens as a whole unit, meaning the piston rod always has its full range of travel regardless of ride height. You get the extreme drop without the ride quality penalty. Adjustment can be made with the kit still fitted to the vehicle.
Gas-assisted, oil-filled dampers with FUCH damper oil and NOK oil seals give the Proline a refined, progressive damping response uprated approximately 25-30% over factory spec. The result is less body roll, crisper steering response, and a more planted, predictable feel through corners. Powder coated damper bodies resist corrosion, and chrome silicon springs shot-peened for strength and powder-coated black are built to last.
This kit runs fixed uprated damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your BMW 3 Series (E91) Touring to deliver the best balance of performance and road comfort at extreme ride heights.
A BMW 3 Series (E91) Touring lowered on Proline coilovers is a proper statement piece. The base-adjustable design means the ride quality doesn't deteriorate as the ride height gets more aggressive. Full damper travel maintained throughout.
The kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.
This Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: BMW 3 Series (E91) (2005-2013) Touring. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316D, 318D, 320D, 325D, 330D. Excluding X-Drive. Excluding M3.
