Skip to product information
1 of 2
Out of stock

STANCE+

Proline Fixed Damping Coilover kit for BMW 3 Series (E90) 2005-2013

Saloon / Petrol & Diesel / RWD

316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316D, 318D, 320D, 325D, and 330D


Lower your BMW 3 Series (E90) Saloon professionally and achieve that perfect stance with the Stance+ Proline Coilover Kit. Up to 75mm of adjustable drop on most applications, a base-adjustable front strut design that maintains full piston rod travel at any ride height, gas-assisted FUCH dampers, NOK oil seals, and powder coated damper bodies. 2-year warranty.

SPECIFICATIONS:

  • Height adjustable from 30 to 75mm on most applications. Extreme lowering, precisely set.
  • Base-adjustable front struts physically shorten or lengthen to achieve ride height. 100% piston rod travel maintained at every setting.
  • Fixed uprated damping, tuned specifically for each application at 25-30% above standard.
  • Gas-assisted, oil-filled FUCH dampers with NOK oil seals for durability and refined performance.
  • Drop links supplied where needed. 2-year unlimited mileage warranty as standard.
Regular price £399.99
Sale price £399.99 Regular price

Sorry, it's out of stock.

But we can let you know when it's back in.

Want next day delivery? Be quick!


  • Fully secure checkout
  • 2 Year Warranty
  • Rated and reviewed

Vehicle Compatibility

Make

  • BMW

Model

  • 3 Series

Year

  • 2005
  • 2006
  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013

Generation

  • E90

Engine

  • 316i
  • 318i
  • 320i
  • 323i
  • 325i
  • 328i
  • 330i
  • 335i
  • 316D
  • 318D
  • 320D
  • 325D
  • 330D

Fuel Type

  • Petrol
  • Diesel

Body Type

  • Saloon

Drivetrain

  • RWD

Notes

Excluding X-Drive

Details

The Stance+ Proline Coilover Kit is built for enthusiasts who want to go lower than most coilover kits allow. Base-adjustable front struts physically change length to achieve extreme ride heights on your BMW 3 Series (E90) Saloon, with adjustment possible while the kit is still fitted to the car.

The base-adjustable design is what sets the Proline apart from conventional coilovers. On a standard kit, lowering is achieved by moving the spring seat down the shock body, which eventually limits damper travel and compromises ride quality. The Proline works differently. The front strut physically shortens or lengthens as a whole unit, meaning the piston rod always has its full range of travel regardless of ride height. You get the extreme drop without the ride quality penalty. Adjustment can be made with the kit still fitted to the vehicle.

Gas-assisted, oil-filled dampers with FUCH damper oil and NOK oil seals give the Proline a refined, progressive damping response uprated approximately 25-30% over factory spec. The result is less body roll, crisper steering response, and a more planted, predictable feel through corners. Powder coated damper bodies resist corrosion, and chrome silicon springs shot-peened for strength and powder-coated black are built to last.

This kit runs fixed uprated sports damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your BMW 3 Series (E90) Saloon to deliver the best balance of performance and road comfort at extreme ride heights.

The Proline's base-adjustable design gives your BMW 3 Series (E90) Saloon up to 75mm of drop while keeping 100% damper travel intact, so the suspension system can do its job properly at any ride height.

The kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.

This Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: BMW 3 Series (E90) (2005-2013) Saloon. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316D, 318D, 320D, 325D, 330D. Excluding X-Drive. Excluding M3.

Extra Details

  • Technical Specs

    Front Lowering: 35-75mm

    Rear Lowering: 35-75mm

    Front Max Axle Weight: 1710kg

    Rear Max Axle Weight: 1720kg

  • Product Notes

    • Coilover front suspension.
    • Rear suspension consists of a separate damper, spring and rear height adjuster collar.
    • Adjustable drop links included.
  • Fitting Notes

    • Top mounts not included (uses original equipment).
    • Bump stops may need to be shortened.
    • Wheel spacers may be necessary.
    • Only to be fitted by a qualified vehicle technician.
    • Rear height adjuster to be mounted above rear springs. To do this the factory rear spring plates need to be removed. Adjuster fits inside the hole in the chassis.
1 of 3

Coilover Components Explained