Details
When standard coilovers won't go low enough, the Stance+ Proline steps in. Base-adjustable in length, the front struts physically shorten or lengthen to achieve your desired ride height, meaning full piston rod travel is maintained no matter how low you run your Transporter T26/T28/T30 (T6/T6.1). The T26/T28/T30 use the popular slide in and clamp style of front strut fitment. The front strut slides into the hub and is secured into place with pinch bolts. Max lowering up to 150mm of drop on most applications. The spring rates and damping rates are compatible with all loads from 2600kg (T26), 2800kg (T28) and the heavier 3000kg (T30).
Base adjustment is the Proline's defining feature. Where most coilover kits achieve lowering by repositioning the spring seat, the Proline front struts change in physical length. Shorten the strut to go lower, lengthen the strut to go higher. The result is that your piston rod always has its full stroke available, giving the suspension system everything it needs to do its job properly at any ride height from 30 to 150mm of drop. Adjustment can be done while the kit is fitted on the van.
Underneath the Proline's headline drop numbers is a properly specified damper package. Gas-assisted, oil-filled FUCH dampers uprated around 25-30% over standard combined with 20-point damping adjustment. The heavy-duty dampers use NOK oil seals for durability and FUCH damper oil for consistent lubricity. Chrome silicon springs are shot-peened for strength and powder-coated black. Black powder coated coilover and damper bodies complete a kit that's engineered to perform and built to last.
This kit features 20-point adjustable damping, giving you precise control over the damper's firmness. Wind it softer for daily comfort, firm it up for a track day or a spirited B-road blast. Twenty clicks of adjustment from full soft to full firm means you can dial in exactly the right setup for your driving style and road conditions, all without removing the kit from the van.
Low vans are in a class of their own, and the VW Transporter T6/T6.1 is one of the most popular platforms in the van tuning and styling scene. The Proline kit is specifically engineered for the Transporter's heavier platform, giving you extreme lowering capability that's been developed and tuned for the weight and geometry of the Transporter T6/T6.1. In the lower T26/T28/T30 load weight rating, this kit is matched correctly to your specific chassis and load carrying capabilities.
The kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components to protect them and make future height adjustments straightforward. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. The kit uses the factory drop links, however our short universal kits can be used if needed. Backed by a 2-year Stance+ warranty.
This Stance+ Proline Ride Height and Damping Adjustable Coilover Kit is suitable for: VW Transporter T26/T28/T30 (T6/T6.1) (70X/D) (2015-2023) Panel Van, Combi, Shuttle, Caravelle. 2WD and 4 Motion models. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front suspension uses clamp type fitting.
