Details
This is the Stance+ Proline. The top of the Stance+ coilover range, built for drivers who want extreme lowering without giving up ride quality. The VW Transporter T32 (T6/T6.1) kit delivers up to 150mm of drop on most applications, using a base-adjustable design that maintains 100% damper travel at every ride height.
The base-adjustable design is what sets the Proline apart from conventional kits. On a standard coilover kit, lowering is achieved by moving the spring seat down the shock body, which eventually limits damper travel and compromises ride quality. The Proline works differently. The front strut physically shortens or lengthens as a whole unit, meaning the piston rod always has its full range of travel regardless of ride height. You get the extreme drop without the ride quality penalty. Adjustment can be made with the kit still fitted to the vehicle.
Gas-assisted, oil-filled dampers with FUCH damper oil and NOK oil seals give the Proline a refined, progressive damping response, uprated over factory spec, combined with 20-point damping adjustment. The result is less body roll, crisper steering response, and a more planted, predictable feel through corners. Black powder coated coilover bodies resist corrosion, chromed silicon springs are shot-peened for strength, powder-coated black and are built to last.
With 20-point damping adjustment, this Proline kit lets you fine-tune the ride to your exact preference. Twenty clicks from soft to firm on each damper means you can run a comfortable, compliant setup for everyday use and switch to a firmer, more controlled setting for fast road use if preferred.
Lowered Transporters command serious attention, and the Proline kit helps achieve the perfect stance. The Stance+ Proline coilovers deliver maximum lowering, combined with a silky-smooth ride. Engineered specifically for the bolt on style front strut that comes exclusively on the VW Transporter T32 T6/T6.1 platform. The kit incorporates the increased load capacity of the T32 (3200kg) platform.
A complete bolt-on replacement coilover kit for your factory suspension, reusing your original top mounts and bearings. New top mounts are always recommended. Copper grease the threaded components before fitting. Professional installation and a full laser alignment are essential once the kit has been fitted. Factory drop links can be used or our adjustable length drop links can be fitted if needed. Covered by the Stance+ 2-year unlimited mileage warranty.
This Stance+ Proline Ride Height and Damping Adjustable Coilover Kit is suitable for: VW Transporter T32 (T6/T6.1) (70X/D) (2015-2023) Panel Van, Combi, Shuttle, Caravelle. 2WD and 4 Motion models. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front suspension uses Bolt on type fitting.
