• Camber Shim Kit – STANCE+
  • Camber Shim Kit – STANCE+
In stock

STANCE+

Grey EZ Rear Camber Shim Kit

The Stance+ Grey EZ Camber Shims are the tidy way to pull rear camber and toe back into line on cars with a solid or fixed beam rear axle. They fit between the hub and the beam for up to 1.5 degrees of correction, no drilling required. A reversible fix for the excessive negative camber that lowering brings.

FEATURES:

  • Up to 1.5 degrees of rear camber and toe adjustment.
  • Fits between the rear beam and stub axle, no drilling or permanent modification.
  • For cars with a solid or fixed beam rear axle where factory adjustment is limited or absent.
  • Supplied as an axle kit (pair of shims), one kit per car.
  • A clean, reversible fix fitted in around 40 to 60 minutes. 1-year warranty.
£24.00
£24.00

Want next day delivery? Be quick!

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"
Grey EZ Rear Camber Shim Kit

£24.00

Stance+ Grey EZ Camber Shims are precision-engineered suspension components used to correct rear wheel camber and toe on cars fitted with a solid or fixed beam rear axle. These are the vehicles where factory camber adjustment is limited or simply does not exist, including many popular Audi, Chrysler, Ford, Mazda, MG, Rover and Vauxhall models.

Unlike camber bolts, which replace a strut bolt to tilt the hub, Stance+ Camber Shims are inserted directly between the rear wheel hub assembly and the rear beam or axle. The varying thickness of the shim tilts the hub relative to the axle, correcting the angle of the wheel without drilling or permanent modification.

When a car fitted with a fixed beam rear axle is lowered, the beam geometry causes the rear wheels to take on excessive negative camber. Left uncorrected, this results in uneven tyre wear on the inner edge and reduced tyre contact with the road surface. Stance+ Camber Shims are a clean, reversible fix that puts the geometry back where it should be.

Supplied as an axle kit (pair of shims). One kit required per car. Fitment takes approximately 40 to 60 minutes.

For safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.

Fitment note: For use on the rear of cars fitted with a fixed beam rear axle only. Refer to our vehicle fitment list to confirm compatibility before ordering.

  • Precision-engineered dual angle camber and toe adjustment shim

WHAT'S IN THE BOX

Supplied as an axle kit (pair of shims), one kit required per car.

Precision-engineered composite shim construction.

Make Model Generation Years
Audi 100 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Audi Cabriolet B4 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Audi Coupe B2/B3/B4 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
Chrysler Yoyager 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Ford Escort MK5 1990, 1991, 1992, 1993, 1994, 1995
Ford Escort MK6 1995, 1996, 1997, 1998
Ford Fiesta MK3 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Ford Fiesta MK6 2002, 2003, 2004, 2005, 2006, 2007, 2008
Ford Ka 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Mazda 2 2002, 2003, 2004, 2005, 2006
Mazda 121 2002, 2003, 2004, 2005, 2006
Mazda Demio 2002, 2003, 2004, 2005, 2006
MG ZR 2001, 2002, 2003, 2004, 2005
Rover 200 1995, 1996, 1997, 1998, 1999
Vauxhall Astra MK3 F 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Vauxhall Astra MK4 G 1998, 1999, 2000, 2001, 2002, 2003, 2004
Vauxhall Astra MK5 H 2004, 2005, 2006, 2007, 2008, 2009, 2010
Vauxhall Vectra B 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002