These Stance+ M14x1.25mm 60-degree tapered wheel bolts in anodised black are manufactured from grade 10.9 high-tensile steel with a 17mm hex head. The M14x1.25 thread pitch is a finer thread than the more common M14x1.5, used primarily on BMW and some Japanese vehicles including Toyota, Lexus, Nissan, Mitsubishi and Subaru models. Getting the thread pitch right is as important as the seat type. Always check your existing bolts before ordering.
The 60-degree tapered seat is the most widely used wheel bolt seat type on aftermarket wheels. The angled profile seats securely into the wheel's tapered bolt holes, centring the wheel correctly and providing reliable clamping force.
The anodised black finish gives a clean, purposeful look behind your alloys. Black bolts are a popular choice for wheels with black accents or on lowered cars where the subtle finish suits the overall aesthetic. The anodising also adds a layer of corrosion resistance for long-term protection.
Available in thread lengths from 25mm through to 50mm, covering standard replacement bolts and extended bolts for use with wheel spacers. Working out the right length is straightforward: measure the threaded section of your current factory bolt (most are 25mm or 28mm), then add the width of your spacer. A 5mm spacer with a 25mm stock bolt, for example, needs a 30mm replacement. Always test fit before driving and confirm the bolt does not contact any brake components. If you are fitting Stance+ Wheel Spacers, extended wheel bolts are not optional. They are essential for safety. Standard factory bolts will not provide sufficient thread engagement once a spacer is in place, creating a serious risk of wheel separation. The 35mm to 50mm options in this range are specifically intended for use with spacers of 4mm and above. Never use stock length bolts with spacers, regardless of how thin the spacer is. Sold individually, in packs of 10, or packs of 20. Torque to your vehicle manufacturer's specification and always test fit before driving.
Available thread lengths: 25mm, 30mm, 35mm, 40mm, 45mm and 50mm.