These Stance+ PCD Wheel Hub Adapters are designed to convert a VW Transporter T5 and T6 5x120 (65.1) c/bore van to a 5x130 (71.6) c/bore Porsche wheel fitment. Supplied as a pair of PCD Adapters in a 20mm width per side. This is a specialist conversion for VW commercial owners looking to fit Porsche specification 5x130 wheels onto their vans. Both the PCD and centre bore changes are handled by the adapter, making this a clever solution for a tricky fitment challenge. Suitable for owners of the VW Transporter T5/T5.1/T6/T6.1 (T26/T28/T30/T32) chassis and VW Amarok wanting to fit Porsche wheels onto their commercial vehicles.
Stance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.
At 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.
The adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.
Before fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Important: When using a 20mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.