Stance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 20mm kit converts a 5x120 (65.1) c/bore car/van to 5x112 (57.1) c/bore wheel and is a popular conversion for VW commercial owners. Many VW Transporter T5 and T6 owners want to run Audi, Mercedes-Benz or Volkswagen Group 5x112 wheels on their vans. The adapter handles the centre bore change from 65.1mm to 57.1mm, ensuring a clean and precise fitment. Suitable for owners of the VW Transporter T5/T5.1/T6/T6.1 (T26/T28/T30/T32) chassis and VW Amarok wanting to fit (VAG Group) VW/Audi/Seat/Skoda wheels onto their commercial vehicles.
Every adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver, chosen because it sits far more discreetly behind your alloys than the black finish used by many competing brands. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. The kit is supplied as a pair with all necessary adapter mounting hardware included.
At 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.
The Stance+ PCD adapter bolts to your vehicle's wheel hub using the bolts provided. Your chosen wheels then bolt to the adapter using the original bolts that came with those wheels. The design means the adapter is completely hidden behind the wheel once fitted. It is important to check that your wheel bolts do not protrude through the back of the adapter before final assembly.
Clean the hub surface thoroughly before fitting, using a wire brush to remove any scale, rust or debris. Apply copper grease sparingly to the hub face to prevent corrosion and make future removal easier. Tighten all bolts progressively to the recommended torque specification. Stance+ recommends that all PCD adapters are installed by a qualified vehicle mechanic or trained vehicle technician to ensure a safe and correct fit.
Important fitment note: With 20mm adapters, it is essential to test fit against the back of the wheel before mounting on the car. The wheel bolts you are using may protrude through the back face of the adapter depending on bolt length and wheel design. If they do, the bolts must be shortened before use. Wheel bolts are not included in this kit. Maximum recommended torque for wheel bolts is 110 NM. If in doubt, please call us for advice.