Achieving the right stance starts with the right adapter. This Stance+ 25mm PCD Wheel Hub Adapter kit converts your 5x110 (65.1) c/bore car to a 5x112 (57.1) c/bore wheel fitment, making it a very useful and rare conversion for Vauxhall, Saab and Alfa Romeo owners looking to fit Audi, Mercedes-Benz or Volkswagen Group 5x112 (57.1) c/bore wheels. The adapter also corrects the centre bore from 65.1mm down to 57.1mm for a precise, professional fitment.
Stance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.
The 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.
The adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.
Start by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Important: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 25mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.