Achieving the right stance starts with the right adapter. This Stance+ 45mm PCD Wheel Hub Adapter kit converts your 5x100 (57.1) c/bore car fitment to a 5x130 (71.6) c/bore wheel fitment, making it a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the 5x100 bolt pattern fitted to early VW/Audi/Seat/Skoda and similar group vehicles. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance you are after.
Stance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.
At 45mm per side, this is one of the wider options in the Stance+ PCD adapter range and is designed for those wanting a truly aggressive stance. At this width it is important to ensure you have sufficient arch clearance and that your suspension geometry is set up correctly to accommodate the additional track width. Also popular with particularly wide Porsche wheels with very high offsets where brake caliper and inner arch clearance is essential.
The adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.
Start by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Important: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 45mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.