If you are looking to run 5x130 (71.6) c/bore Porsche wheels on an older vehicle with a 5x100 (57.1) c/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a highly sought-after conversion allowing Porsche specification 5x130 (71.6) c/bore wheels to be fitted to VW/Audi group or similar vehicles running the 5x100 (57.1) c/bore bolt pattern. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance you are after. Very popular in the VW/Audi scene where Porsche wheel conversions are a very popular modification.
Supplied as a pair with 35mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.
The 35mm width is firmly in performance stance territory, pushing the wheel out to fill the arch and achieve a more aggressive look. At this width you should check that your wheel and tyre combination clears your arch liner and suspension components before fitting. Also popular with high offset Porsche wheels where brake caliper and inner arch clearance is necessary.
Fitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.
Prepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Please note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 35mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.