These Stance+ PCD Wheel Hub Adapters are designed to convert a 5x100 (57.1) c/bore car to a 5x130 (71.6) c/bore wheel fitment, supplied as a pair with a 30mm width per side. This is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the older VW/Audi group or similar 5x100 (57.1) c/bore bolt pattern. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance and fitment you are after.
Stance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.
At 30mm per side, this adapter starts to push the wheel out to give a more pronounced stance. It works particularly well on vehicles with standard suspension where a little extra track width adds to both the look and the feel of the car without requiring significant geometry adjustment. Also used on Porsche wheels with a higher offset.
The adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.
Before fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Important: When using a 30mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.