If you are looking to run Porsche 5x130 (71.6) c/bore wheels on a vehicle with a 5x100 (57.1) c/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the 5x100 bolt pattern. Very popular in the VW/Audi group of enthusiasts that run Porsche wheels on their older 5x100 VW/Audi/Seat/Skoda models. With a range of widths available, this adapter gives you the flexibility to dial in exactly the perfect fitment and stance you are after.
Supplied as a pair of adapters with 15mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.
At 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to the same exacting standard as the wider variants.
Fitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.
Prepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Please note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 15mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.