If you are looking to run VW/Audi group 5x112 (57.1) c/bore wheels on a vehicle with a 5x100 (57.1) c/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This is one of the most popular conversions in the Stance+ range, allowing new style Audi, Mercedes-Benz or Volkswagen Group 5x112 (57.1) c/bore wheels to be fitted to vehicles running the older 5x100 (57.1) c/bore bolt pattern found on many earlier Volkswagen, Seat and Subaru models.
Supplied as a pair in 20mm width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.
At 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.
Fitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.
Prepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Please note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 20mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.