Skip to product information
Out of stock

STANCE+

50mm Lowering Springs for VW Transporter (T4) (70X/D) 1991-2004

Multivan & Caravelle +1 / Diesel / 2WD & 4 Motion

1.9D, 1.9TD, 2.4D, and 2.5TDi


The simplest way to lower your VW Transporter (T4) Multivan, Caravelle and Bus. The Stance+ Lowering Spring Kit drops the rear of the van by a fixed 50mm using progressively wound chrome silicon steel springs. Works directly with your factory dampers, no calibration required. 1-year warranty as standard.

SPECIFICATIONS:

  • Fixed 50mm rear drop on this application. A clean, factory-correct lowering with no adjustment required.
  • Engineered for the heavier Transporter platform, with rates suited to van weight and use.
  • Progressively wound coil design for a softer initial rate (everyday comfort) and a firmer rate under cornering load (less body roll).
  • 1-year warranty as standard.
  • Designed to work with your existing factory dampers. No damper change required.
Regular price £59.99
Sale price £59.99 Regular price

Sorry, it's out of stock.

But we can let you know when it's back in.

Want next day delivery? Be quick!


  • Fully secure checkout
  • 2 Year Warranty
  • Rated and reviewed

Vehicle Compatibility

Make

  • Volkswagen

Model

  • Transporter

Year

  • 1991
  • 1992
  • 1993
  • 1994
  • 1995
  • 1996
  • 1997
  • 1998
  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004

Generation

  • 70X/D

Engine

  • 1.9D
  • 1.9TD
  • 2.4D
  • 2.5TDi

Fuel Type

  • Diesel

Body Type

  • Multivan
  • Caravelle
  • Bus

Drivetrain

  • 2WD
  • 4 Motion

Notes

N/A

Details

The Stance+ Lowering Springs deliver a 50mm fixed drop on the rear and a 25-30% uprated spring rate over your factory springs, giving your VW Transporter (T4) Multivan, Caravelle and Bus flatter cornering, less body roll, and a more planted feel through every corner. All whilst working with the factory dampers already on your car.

Progressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.

The springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each rear spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.

This kit is engineered for the rear of the VW Transporter (T4) Multivan, Caravelle and Bus platform, with spring rates tuned to handle the additional kerb weight of a van. It suits both 2WD and 4Motion variants. You will need to adjust the front torsion bar to match the drop of the rear Stance+ springs.

The Transporter is one of the most modified van platforms in the country, and this kit is engineered specifically to handle the additional weight and length of the van platform. A 50mm drop is a meaningful change on a vehicle this size, and the progressive coil winding stops the ride getting harsh. Suitable for the following Diesel engines; 1.9D, 1.9TD, 2.4D and 2.5TDi.

This is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.

This Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T4) (1991-2003) Multivan, Caravelle, Bus. 2WD and 4Motion. Fitted with the following engines: 1.9D, 1.9TD, 2.4D, 2.5TDi.

Extra Details

  • Technical Specs

    Front Lowering: nan

    Rear Lowering: 50mm

    Front Max Axle Weight: nan

    Rear Max Axle Weight: 1490kg

  • Product Notes

    • Stance+ Lowering springs are supplied with a 12 month warranty
    • Supplied as a rear springs only
    • Front height adjustment via factory fitted torsion bar
  • Fitting Notes

    • Only to be fitted by a qualified vehicle technician
    • Top mounts and spring caps not included
    • Can be used with standard OE shocks or sport shock absorbers
    • Lowering quoted is from new vehicle specification and is approximate
1 of 3