If you are looking to run Porsche specification 5x130 (71.6) c/bore wheels on a VW/Audi group or similar vehicle with a 4x100 (57.1) c/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is an ideal solution for those wanting to fit Porsche specification 5x130 wheels to an older VW/Audi group or similar 4x100 vehicle. This very popular conversion is one of our best-selling PCD hub adapters.
Supplied as a pair with 30mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.
At 30mm per side, this adapter starts to push the wheel out to give a more pronounced stance. It works particularly well on vehicles with standard suspension or coilovers where a little extra track width adds to both the look and the feel of the car without requiring significant geometry adjustment.
Fitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.
Prepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Please note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 30mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.