These Stance+ PCD Wheel Hub Adapters are designed to convert an older VW/Audi group or similar 4x100 (57.1) c/bore car fitment to a Porsche 5x130 (71.6) c/bore wheel fitment. Supplied as a pair of adapters in a 25mm per side width. This is an ideal solution for those wanting to fit Porsche specification 5x130 wheels to a an older (VAG) 4x100 vehicle. This conversion allows a wide range of prestige Porsche wheel options that would otherwise be impossible to fit. A popular conversion we see are Porsche wheels on an early VW Golf MK1 or Golf MK2 Gti.
Stance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.
The 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.
The adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.
Before fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.
Important: When using a 25mm bolt-on style PCD Hub adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.