Details
Designed and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your Seat Toledo (1M) Hatchback 2WD brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 45mm drop together in one straightforward upgrade. Suitable for the 1.9TDi, 2.0 and 2.3V5 engines.
Progressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Seat Toledo (1M) Hatchback gets noticeably less body roll without the harshness you'd expect from a stiffer spring.
Spring rates are set approximately 25-30% stiffer than stock, giving your Seat Toledo (1M) Hatchback a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.
The Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Toledo (1M) Hatchback properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.
A direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.
This Stance+ 45mm Lowering Spring Kit is suitable for: Seat Toledo (1M) (1999-2005) Hatchback. 2WD. Fitted with the following engines: 1.9TDi, 2.0, 2.3V5.