Details
If you're new to modifying your Seat Leon (1M) Hatchback 2WD 2.8VR6 and want a clean, effective drop without going the full coilover route, the Stance+ Lowering Spring Kit is the place to start. A 45mm fixed lowering with progressive winding for genuine ride quality, all whilst working with your existing factory dampers.
What makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.
At 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Seat Leon (1M) Hatchback 2WD 2.8VR6 turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.
The Seat Leon (1M) Hatchback 2WD 2.8VR6 carries more weight up front than the four-cylinder variants, and this kit is rate-matched to suit. A 45mm fixed drop and increase spring rates that work with the VR6's specific weight distribution.
The Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 2WD 2.8VR6 properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.
Fitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.
This Stance+ 45mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 2WD. Fitted with the following Petrol engines: 2.8VR6.