Skip to product information
Out of stock

STANCE+

45mm Lowering Springs for SEAT Leon Diesel (1M) 1999-2005

Hatchback / Diesel / 2WD

1.9SDi and 1.9TDi


Replace your factory springs with the Stance+ Lowering Spring Kit and drop your Seat Leon (1M) Hatchback 2WD Diesel engine car by a fixed 45mm. The progressive coil winding keeps everyday ride quality intact, and the 25-30% uprated spring rate noticeably tightens up the way your Seat drives and performs.

SPECIFICATIONS:

  • Fixed 45mm drop on this application. A clean, factory-correct lowering with no adjustment required.
  • Designed specifically for the diesel-engined variant. Diesel front weight is rate matched.
  • Progressively wound coil design for a softer initial rate (everyday comfort) and a firmer rate under cornering load (less body roll).
  • High-tensile chrome silicon steel construction, shot-peened for strength.
  • Designed and engineered in the UK exclusively for Stance+.
Regular price £79.99
Sale price £79.99 Regular price

Sorry, it's out of stock.

But we can let you know when it's back in.

Want next day delivery? Be quick!


  • Fully secure checkout
  • 2 Year Warranty
  • Rated and reviewed

Vehicle Compatibility

Make

  • SEAT

Model

  • Leon

Year

  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005

Generation

  • 1M

Engine

  • 1.9SDi
  • 1.9TDi

Fuel Type

  • Diesel

Body Type

  • Hatchback

Drivetrain

  • 2WD

Notes

N/A

Details

Drop your Seat Leon (1M) Hatchback 2WD Diesel engine car by a fixed 45mm with the Stance+ Lowering Spring Kit. A simple swap with your factory springs delivers a more aggressive stance, sharper handling, and a properly transformed look without the cost or complexity of a full coilover kit.

Progressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Seat Leon (1M) Hatchback 2WD Diesel engine car gets noticeably less body roll without the harshness you'd expect from a stiffer spring.

Spring rates are set approximately 25-30% above factory, giving your Seat Leon (1M) Hatchback 2WD Diesel a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.

This kit is designed specifically for the Diesel-engined variant of the Seat Leon (1M). Diesel engines typically carry more weight up front than petrol equivalents, and this kit is rate-matched to suit. Fitting a Petrol-spec kit to a Diesel car will sometimes leave the front sitting too low.

The Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 2WD Diesel engine car properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.

A direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.

This Stance+ 45mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 2WD. Fitted with the following Diesel engines: 1.9SDi, 1.9TDi.

Extra Details

  • Technical Specs

    Front Lowering: 45mm

    Rear Lowering: 45mm

    Front Max Axle Weight: Over 1021kg

    Rear Max Axle Weight: 1025kg

  • Product Notes

    • Stance+ Lowering springs are supplied with a 12 month warranty
    • Supplied as a complete car kit
  • Fitting Notes

    • Only to be fitted by a qualified vehicle technician
    • Top mounts and spring caps not included
    • Can be used with standard OE shocks or sport shock absorbers
    • Lowering quoted is from new vehicle specification and is approximate
1 of 3