Skip to product information
Out of stock

STANCE+

35mm Lowering Springs for SEAT Leon (1M) 4 Motion 1999-2005

Hatchback / Petrol & Diesel / 4 Motion

1.8T, 1.9TDi, and 2.8 V6


The Stance+ Lowering Springs deliver a fixed 35mm drop for your Seat Leon (1M) Hatchback 4Motion with the progressive coil winding that separates a proper engineered spring from a basic lowering spring kit. Designed and engineered in the UK, backed by a 1-year warranty. Designed specifically for the 4Motion variant.

SPECIFICATIONS:

  • Fixed 35mm drop on this application. A clean, factory-correct lowering with no adjustment required.
  • Engineered specifically for the 4Motion four-wheel-drive variant.
  • Progressively wound coil design for a softer initial rate (everyday comfort) and a firmer rate under cornering load (less body roll).
  • Designed and engineered in the UK exclusively for Stance+.
  • High-tensile chrome silicon steel construction, shot-peened for strength.
Regular price £89.99
Sale price £89.99 Regular price

Sorry, it's out of stock.

But we can let you know when it's back in.

Want next day delivery? Be quick!


  • Fully secure checkout
  • 2 Year Warranty
  • Rated and reviewed

Vehicle Compatibility

Make

  • SEAT

Model

  • Leon

Year

  • 1999
  • 2000
  • 2001
  • 2002
  • 2003
  • 2004
  • 2005

Generation

  • 1M

Engine

  • 1.8T
  • 1.9TDi
  • 2.8 V6

Fuel Type

  • Petrol
  • Diesel

Body Type

  • Hatchback

Drivetrain

  • 4 Motion

Notes

N/A

Details

Designed to work directly with your existing factory dampers, the Stance+ Lowering Spring Kit for the Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 is the simplest way to drop your car 35mm and noticeably improve the way it handles. No damper changes, no calibration, no fuss.

The springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 stays composed through corners without punishing you over rough surfaces.

With springs uprated 25-30% over factory specification, the Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.

Specifically engineered for the Seat Leon 4Motion 1.8T, 1.9TDi, 2.8 V6 four-wheel-drive variant, this kit accounts for the additional weight and slightly different geometry of the all-wheel-drive system. Fitting a 2WD kit to a 4Motion car will not give the correct ride height or handling balance, so always check the drivetrain spec before ordering.

The Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.

Springs fit directly in place of your factory items, working with your existing factory dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.

This Stance+ 35mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 4Motion. Fitted with the following engines: 2.8VR6.

Extra Details

  • Technical Specs

    Front Lowering: 35mm

    Rear Lowering: 35mm

    Front Max Axle Weight: 1035kg

    Rear Max Axle Weight: 1050kg

  • Product Notes

    • Stance+ Lowering springs are supplied with a 12 month warranty
    • Supplied as a complete car kit
  • Fitting Notes

    • Only to be fitted by a qualified vehicle technician
    • Top mounts and spring caps not included
    • Can be used with standard OE shocks or sport shock absorbers
    • Lowering quoted is from new vehicle specification and is approximate
1 of 3