Details
Drop it. Tighten it. Improve it. The Stance+ Lowering Spring Kit for the Seat Leon (1P) 2WD does all three in a single bolt-on upgrade, dropping ride height by 30mm whilst keeping your factory dampers in place. Suitable for all Seat Leon (1P) 2WD Petrol and Diesel engines including the 1.2TSi, 1.4, 1.4 TSi, 1.8TSi and 1.6TDi, 1.9TDi, 2.0TDi, 2.0TDi FR models. Not suitable for the Cupra models.
Progressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.
The springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.
For drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 30mm fixed lowering, progressive coil winding, and a 25-30% increased spring rate, all working with your factory dampers.
This is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.
This Stance+ 30mm Lowering Spring Kit is suitable for: Seat Leon (1P) (2005-2013) Hatchback. 2WD. Fitted with the following engines: 1.2TSi, 1.4, 1.4 TSi, 1.8TSi, 1.6TDi, 1.9TDi, 2.0TDi, 2.0TDi FR.