Details
Designed and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your VW Scirocco Mk 3 (17) Coupe brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 25mm drop together in one straightforward upgrade. Suitable for both 2.0TFSi and 2.0TFSi R.
Progressive winding means the coil rate is not constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The VW Scirocco Mk 3 (17) Coupe gets noticeably less body roll without the harshness you would expect from a stiffer spring.
Spring rates are set approximately 25-30% above factory, giving your VW Scirocco Mk 3 (17) Coupe a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.
The Scirocco Mk 3 is a car that genuinely rewards being lowered. That clean coupe roofline and wide stance looks exactly right with a 25mm drop filling the arches. The Stance+ spring kit delivers that without the cost or complexity of a coilover kit, and without touching your factory dampers.
A direct swap with your factory springs. Your existing dampers stay in place and no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.
This Stance+ 25mm Lowering Spring Kit is suitable for: VW Scirocco Mk 3 (17) (2008-2017) Coupe. 2WD and 4 Motion. Fitted with the following engines: 2.0TFSi, 2.0TFSi R.