{"title":"Lowering Springs","description":"\u003cp class=\"p1\"\u003eThe simplest way to lower your car and sharpen up the handling. Stance+ Lowering Springs are a direct replacement for your factory springs, giving you a lower, sportier ride without the cost of a full Stance+ Coilover Kit. Compatible with your standard shock absorbers, they're the ideal first step for any enthusiast looking to improve how their car sits and handles.\u003c\/p\u003e","products":[{"product_id":"35mm-lowering-springs-audi-a3-8l-quattro-1996-2003","title":"35mm Lowering Springs for Audi A3 (8L) Quattro 1996-2003","description":"\u003cp\u003eThe Stance+ Lowering Springs for the Audi A3 (8L) Hatchback 1.8T Quattro and 3.2 V6 Quattro. are the most cost-effective way to lower your car. Replace your factory springs with these uprated, shorter springs and you'll transform both the looks and the handling of your Audi without needing to swap out your dampers.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Audi A3 (8L) Hatchback 1.8T Quattro and 3.2 V6 Quattro an aggressive 35mm drop and improved handling without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Audi A3 (8L) (1996-2003) Hatchback. Quattro. Fitted with the following engines: 1.8T, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825809977682,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-audi-a3-8l-s3-quattro-1996-2004","title":"35mm Lowering Springs for Audi A3 (8L) S3 Quattro 1996-2004","description":"\u003cp\u003eDrop your Audi A3 (8L) Hatchback 1.8T S3 Quattro by a fixed 35mm with the Stance+ Lowering Spring Kit. A simple swap with your factory springs delivers a more aggressive stance, sharper handling, and a properly transformed look without the cost or complexity of a full coilover kit.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The A3 (8L) Quattro gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your Audi A3 (8L) Hatchback 1.8T S3 Quattro a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 35mm fixed lowering, progressive coil winding, and 25-30% stiffer spring rate, all working perfectly with your factory dampers.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Audi A3 (8L) (1996-2004) Hatchback. Quattro. Fitted with the following engines: 1.8T S3.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810207058,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"30mm-lowering-springs-audi-a3-8p1-2003-2012","title":"30mm Lowering Springs for Audi A3 (8P1) 2003-2012","description":"\u003cp\u003eIf you're new to modifying your Audi A3 (8P1) Hatchback 2WD and want a clean, effective drop without going the full coilover route, the Stance+ Lowering Spring Kit is the place to start. A 30mm fixed lowering with progressive winding for genuine ride quality, all whilst working with your existing factory dampers. Suitable for both Petrol and Diesel engines.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Audi A3 (8P1) Hatchback 2WD turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Audi A3 (8P1) Hatchback 2WD a meaningful 30mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers already on your car. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Audi A3 (8P1) (2003-2012) Hatchback. 2WD. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8T, 1.8FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810239826,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"35mm-lowering-springs-audi-tt-8n-quattro-1998-2006","title":"35mm Lowering Springs for Audi TT (8N) Quattro 1998-2006","description":"\u003cp\u003eDesigned to work directly with your existing factory dampers, the Stance+ Lowering Spring Kit for the Audi TT (8N) Coupe and Roadster 1.8T Quattro and 3.2 V6 Quattro is the simplest way to drop your car 35mm and noticeably improve the way it handles. No damper changes, no calibration, no fuss.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Audi TT (8N) Coupe and Roadster 1.8T Quattro and 3.2 V6 Quattro stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the Audi TT (8N) Coupe and Roadster 1.8T Quattro and 3.2 V6 Quattro feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your Audi TT (8N) Coupe and Roadster 1.8T Quattro and 3.2 V6 Quattro sitting properly. 35mm fixed drop, progressively wound for ride quality, and rates uprated enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Audi TT (8N) (1998-2006) Coupe and Roadster. Quattro. Fitted with the following engines: 1.8T, 3.2V6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810436434,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-bmw-3-series-e46-1998-2005","title":"35mm Lowering Springs for BMW 3 Series (E46) 1998-2005","description":"\u003cp\u003eA favourite in the BMW scene, the Stance+ Lowering Springs give your BMW 3 Series (E46) Saloon Petrol and Diesel engines a clean, factory-correct 35mm drop with a progressively wound spring for a refined ride. The most accessible way to lower your BMW properly.\u003c\/p\u003e\n\u003cp\u003eThe progressive wind design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the BMW 3 Series (E46) Saloon Petrol and Diesel engines planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your BMW 3 Series (E46) Saloon Petrol and Diesel engines a meaningful 35mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: BMW 3 series (E46) (1998-2005) Saloon. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 330i, 318D, 320D, 330D.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810567506,"sku":"SPLS01015A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01015A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-bmw-3-series-e46-1998-2006","title":"35mm Lowering Springs for BMW 3 Series (E46) 1998-2006","description":"\u003cp\u003eDrop it. Tighten it. Improve it. The Stance+ Lowering Spring Kit for the BMW 3 Series (E46) Coupe Petrol and Diesel engines does all three in a single bolt-on upgrade, dropping ride height by 35mm whilst keeping your factory dampers in place.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your BMW 3 Series (E46) Coupe Petrol and Diesel engines a meaningful and purposeful 35mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: BMW 3 series (E46) (1998-2006) Coupe. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 330i, 318D, 320D, 330D.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810764114,"sku":"SPLS01015A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01015A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-bmw-3-series-e46-2000-2005","title":"35mm Lowering Springs for BMW 3 Series (E46) 2000-2005","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your BMW 3 Series (E46) Touring Petrol and Diesel engines brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 35mm drop together in one straightforward upgrade.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The BMW 3 Series (E46) Touring Petrol and Diesel gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your BMW 3 Series (E46) Touring a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your BMW 3 Series (E46) Touring sitting properly. 35mm fixed drop, progressively wound for ride quality, and increase spring rates enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: BMW 3 series (E46) (2000-2005) Touring. RWD models only. Fitted with the following engines: 316i, 318i, 320i, 323i, 325i, 330i, 318D, 320D, 330D.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825810895186,"sku":"SPLS01015A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01015A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-bmw-3-series-e46-2001-2005","title":"35mm Lowering Springs for BMW 3 Series (E46) 2001-2005","description":"\u003cp\u003eTransform your BMW 3 Series (E46) Compact Petrol and Diesel from standard to seriously sharp with the Stance+ Lowering Spring Kit. A clean 35mm drop, and a 25-30% increase in spring rating over factory. Progressive coil winding combines to give you better looks and tighter handling, all with your existing factory fit dampers.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the BMW 3 Series (E46) Compact turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most accessible way to lower your BMW 3 Series (E46) Compact properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers already on your car. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: BMW 3 series (E46) (2001-2005) Compact. RWD models only. Fitted with the following engines: 316Ti, 318Ti, 320Ti, 323Ti, 325Ti, 323Ti, 325Ti, 318TD, 320TD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811091794,"sku":"SPLS01015A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01015A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-ford-fiesta-mk-6-petrol-jh-jd-2002-2008","title":"35mm Lowering Springs for Ford Fiesta Mk 6 Petrol (JH\/JD) 2002-2008","description":"\u003cp\u003eNot every car needs a full coilover setup. The Stance+ Lowering Spring Kit gives your Ford Fiesta Mk 6 (JH\/JD) Hatchback Petrol engines a fixed 35mm drop, sharper handling, and a more aggressive stance at a fraction of the cost. A proper upgrade that takes a fraction of the time to fit.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Ford Fiesta Mk 6 (JH\/JD) Hatchback Petrol engine stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the Ford Fiesta Mk 6 (JH\/JD) Hatchback Petrol engine cars feel tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the Ford Fiesta Mk 6 (JH\/JD) Hatchback suitable for 1.25, 1.3, 1.4, 1.6 engine sizes. Petrol and diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 35mm fixed lowering, progressive coil winding, and a 25-30% increase in spring stiffness, all working with your factory dampers.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Ford Fiesta MK 6 (JH\/JHD) (2002-2008) Hatchback. 2WD. Fitted with the following engines: 1.25, 1.3, 1.4, 1.6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811255634,"sku":"SPLS01108A","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01108A-box.jpg?v=1787118491"},{"product_id":"30mm-lowering-springs-ford-fiesta-mk-6-diesel-jh-jd-2002-2008","title":"30mm Lowering Springs for Ford Fiesta Mk 6 Diesel (JH\/JD) 2002-2008","description":"\u003cp\u003eGet your Ford Fiesta Mk 6 (JH\/JD) Hatchback Diesel engine car sitting properly with the Stance+ Lowering Spring Kit. A direct replacement for your factory springs, dropping ride height by 30mm and bringing 25-30% stiffer spring rates for noticeably tighter handling. Backed by a 1-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe progressive wound design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the Ford Fiesta Mk 6 (JH\/JD) Hatchback Diesel engine car planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the diesel-engined variant of the Ford Fiesta Mk 6 (JH\/JD) Hatchback covering the 1.4TDCi and 1.6TDCi engines. Diesel engines typically carry more weight up front than petrol equivalents, and this kit is rate-matched to suit. Fitting a petrol-spec kit to a diesel car can leave the front sitting too low.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 30mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rates, all working with your factory dampers.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Ford Fiesta MK 6 (JH\/JHD) (2002-2008) Hatchback. 2WD. Fitted with the following engines: 1.4TDCi, 1.6TDCi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811419474,"sku":"SPLS01108B","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01108B-box.jpg?v=1787118491"},{"product_id":"30mm-lowering-springs-ford-fiesta-mk-6-st-jh-jd-2002-2008","title":"30mm Lowering Springs for Ford Fiesta Mk 6 ST (JH\/JD) 2002-2008","description":"\u003cp\u003eThe Stance+ Lowering Springs deliver a 30mm fixed drop and a 25-30% uprated spring rate over your factory springs, giving your Ford Fiesta Mk 6 (JH\/JD) Hatchback 2.0ST 150BHP flatter cornering, less body roll, and a more planted feel through every corner. All whilst working with the factory fit dampers already on your car.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThe Ford Fiesta Mk 6 (JH\/JD) Hatchback 2.0ST 150BHP is a proper hot hatch, and these springs are tuned to suit the higher-performance chassis. The increased spring rates and the 30mm fixed drop work with the ST's existing damper setup to give a tighter, more committed feel without compromising the everyday usability that makes the ST so good.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your Ford Fiesta Mk 6 (JH\/JD) Hatchback 2.0ST 150BHP sitting properly. 30mm fixed drop, progressively wound for ride quality, and spring rates increased enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Ford Fiesta MK 6 (JH\/JHD) (2002-2008) Hatchback. 2WD. Fitted with the following engines: 2.0ST 150bhp.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811550546,"sku":"SPLS01108B","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01108B-box.jpg?v=1787118491"},{"product_id":"35mm-lowering-springs-mazda-2-petrol-dy-2003-2007","title":"35mm Lowering Springs for Mazda 2 Petrol (DY) 2003-2007","description":"\u003cp\u003eLower your Mazda 2 (DY) Hatchback Petrol engine by 35mm and feel the difference from the first roundabout. The Stance+ Lowering Spring Kit replaces your factory springs with progressively wound, uprated units that genuinely transform how the car looks and how it drives.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Mazda 2 (DY) Hatchback Petrol engine gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your Mazda 2 (DY) a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the Mazda 2 (DY Chassis), suitable for the 1.2, 1.3, 1.4, 1.5 and 1.6 engines.\u003c\/p\u003e\n\u003cp\u003ePetrol and Diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 35mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rates, all working with your factory dampers.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Mazda 2 (DY) (2003-2007) Hatchback. 2WD. Fitted with the following engines: 1.2, 1.3, 1.4, 1.5, 1.6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811714386,"sku":"SPLS01108A","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01108A-box.jpg?v=1787118491"},{"product_id":"30mm-lowering-springs-mazda-2-diesel-dy-2003-2007","title":"30mm Lowering Springs for Mazda 2 Diesel (DY) 2003-2007","description":"\u003cp\u003eFor drivers who use their Mazda 2 (DY) Hatchback Diesel engine car every day but want it sitting properly, the Stance+ Lowering Spring Kit is the right answer. A fixed 30mm drop, progressive coil winding for ride comfort, and direct compatibility with your factory dampers. Simple, effective, and proven.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Mazda 2 (DY) Hatchback Diesel turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the diesel-engined variant of the Mazda 2 (DY) Hatchback and is suitable specifically for the 1.4D engine. Diesel engines typically carry more weight up front than petrol equivalents, and this kit is rate-matched to suit. Fitting a petrol-spec kit to a diesel car can leave the front sitting too low.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your Mazda 2 (DY) Hatchback 1.4 Diesel sitting properly. 30mm fixed drop, progressively wound for ride quality, and spring rates increased enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the dampers already on your car. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Mazda 2 (DY) (2003-2007) Hatchback. 2WD. Fitted with the following engines: 1.4D.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825811976530,"sku":"SPLS01108B","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01108B-box.jpg?v=1787118491"},{"product_id":"40mm-lowering-springs-renault-clio-mk-2-1998-2005","title":"40mm Lowering Springs for Renault Clio Mk 2 1998-2005","description":"\u003cp\u003eStance starts here. The Stance+ Lowering Spring Kit gives your Renault Clio Mk 2 (1998-2005) Petrol and Diesel engine a clean 40mm drop, fills the wheel arches properly, and tightens the handling, all without the cost or complexity of a coilover swap. The simplest way to get the look right.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Renault Clio Mk 2 (1998-2005) Petrol and Diesel engine stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% percent over factory specification, the Renault Clio Mk 2 (1998-2005) feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Renault Clio Mk 2 (1998-2005) a meaningful 40mm drop and proper handling improvements without the cost or complexity of a coilover kit. Compatible with the following Petrol and Diesel engines: 1.4, 1.6, 1.5DCi, 1.9D, 1.9TDi. Progressive winding on the springs makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing factory fit dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 40mm Lowering Spring Kit is suitable for: Renault Clio MK 2 (1998-2005) Hatchback. 2WD. Fitted with the following engines: 1.4, 1.6, 1.5DCi, 1.9D, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825812304210,"sku":"SPLS01201A","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01201A-box.jpg?v=1787118490"},{"product_id":"40mm-lowering-springs-renault-clio-mk-2-sport-1998-2005","title":"40mm Lowering Springs for Renault Clio Mk 2 Sport 1998-2005","description":"\u003cp\u003eHigh-tensile chrome silicon steel. Shot-peened for strength. Powder-coated black for weather protection. Progressively wound for a refined ride. The Stance+ Lowering Spring Kit for the Renault Clio Mk 2 2.0 16V Sport 172\/182 (1998-2005). brings proper engineering to a fixed 40mm drop.\u003c\/p\u003e\n\u003cp\u003eThe progressive wound design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the Renault Clio Mk 2 2.0 16V Sport 172\/182 (1998-2005) planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in the corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThe Renault Clio Mk 2 2.0 16V Sport 172\/182 (1998-2005) has its own specific suspension setup from factory, and this kit is matched to suit. A 40mm fixed drop with rates tuned for the Sport's chassis, rather than a standard model kit forced to fit.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Renault Clio Mk 2 2.0 16V Sport 172\/182 (1998-2005) a meaningful 40mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 40mm Lowering Spring Kit is suitable for: Renault Clio MK 2 Sport (1998-2005) Hatchback. 2WD. Fitted with the following engines: 2.0 16V Sport 172\/182.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815482706,"sku":"SPLS01201B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01201B-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-seat-leon-petrol-1m-1999-2005","title":"45mm Lowering Springs for SEAT Leon Petrol (1M) 1999-2005","description":"\u003cp\u003eThe Stance+ Lowering Springs for the Seat Leon (1M) Hatchback 2WD Petrol engine car is the most cost-effective way to lower your car. Replace your factory springs with these uprated, shorter springs and you'll transform both the looks and the handling of your Seat without needing to swap out your dampers.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the Seat Leon (1M) Hatchback 2WD and is compatible with the 1.4, 1.6, 1.8 20v and 1.8T 20v. Petrol and Diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your Seat Leon (1M) Hatchback 2WD Petrol engine car sitting properly. 45mm fixed drop, progressively wound for ride quality, and rates uprated enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 2WD. Fitted with the following Petrol engines: 1.4, 1.6, 1.8 20v, 1.8T 20v.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815613778,"sku":"SPLS01001A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-seat-leon-diesel-1m-1999-2005","title":"45mm Lowering Springs for SEAT Leon Diesel (1M) 1999-2005","description":"\u003cp\u003eDrop your Seat Leon (1M) Hatchback 2WD Diesel engine car by a fixed 45mm with the Stance+ Lowering Spring Kit. A simple swap with your factory springs delivers a more aggressive stance, sharper handling, and a properly transformed look without the cost or complexity of a full coilover kit.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Seat Leon (1M) Hatchback 2WD Diesel engine car gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your Seat Leon (1M) Hatchback 2WD Diesel a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the Diesel-engined variant of the Seat Leon (1M). Diesel engines typically carry more weight up front than petrol equivalents, and this kit is rate-matched to suit. Fitting a Petrol-spec kit to a Diesel car will sometimes leave the front sitting too low.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 2WD Diesel engine car properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 2WD. Fitted with the following Diesel engines: 1.9SDi, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815646546,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-seat-leon-vr6-1m-1999-2005","title":"45mm Lowering Springs for SEAT Leon VR6 (1M) 1999-2005","description":"\u003cp\u003eIf you're new to modifying your Seat Leon (1M) Hatchback 2WD 2.8VR6 and want a clean, effective drop without going the full coilover route, the Stance+ Lowering Spring Kit is the place to start. A 45mm fixed lowering with progressive winding for genuine ride quality, all whilst working with your existing factory dampers.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Seat Leon (1M) Hatchback 2WD 2.8VR6 turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThe Seat Leon (1M) Hatchback 2WD 2.8VR6 carries more weight up front than the four-cylinder variants, and this kit is rate-matched to suit. A 45mm fixed drop and increase spring rates that work with the VR6's specific weight distribution.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 2WD 2.8VR6 properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 2WD. Fitted with the following Petrol engines: 2.8VR6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815843154,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"35mm-lowering-springs-seat-leon-4motion-1m-1999-2005","title":"35mm Lowering Springs for SEAT Leon (1M) 4 Motion 1999-2005","description":"\u003cp\u003eDesigned to work directly with your existing factory dampers, the Stance+ Lowering Spring Kit for the Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 is the simplest way to drop your car 35mm and noticeably improve the way it handles. No damper changes, no calibration, no fuss.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eSpecifically engineered for the Seat Leon 4Motion 1.8T, 1.9TDi, 2.8 V6 four-wheel-drive variant, this kit accounts for the additional weight and slightly different geometry of the all-wheel-drive system. Fitting a 2WD kit to a 4Motion car will not give the correct ride height or handling balance, so always check the drivetrain spec before ordering.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon (1M) Hatchback 4Motion 1.8T, 1.9TDi, 2.8V6 properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing factory dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Seat Leon (1M) (1999-2005) Hatchback. 4Motion. Fitted with the following engines: 2.8VR6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815875922,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"20mm-lowering-springs-seat-leon-cupra-1p-2005-2013","title":"20mm Lowering Springs for SEAT Leon Cupra (1P) 2005-2013","description":"\u003cp\u003eA favourite in the Seat tuning community, the Stance+ Lowering Springs give your Seat Leon Cupra (1P) a clean, factory-correct 20mm drop with a progressively wound spring for a refined ride. The most accessible way to lower your Seat properly.\u003c\/p\u003e\n\u003cp\u003eThe progressive wind design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the Seat Leon Cupra (1P) planted. One spring, two characters, depending on what you ask of it. Suitable for all Seat Leon Cupra (1P) models built between 2005-2013 including the 2.0TFSi Cupra, 2.0TFSi Cupra R, 2.0TFSi Copa Edition, 2.0TFSi Cupra 310 Limited Edition.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThe Cupra is the performance end of the Leon range, and this kit is designed specifically for that model. A modest 20mm fixed drop suits the Cupra's already-firm setup, sharpening up the stance without going over the top. The progressive winding keeps the ride civilised for daily use.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Leon Cupra (1P) properly. 20mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing factory dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 20mm Lowering Spring Kit is suitable for: Seat Leon Cupra (1P) (2005-2013) Hatchback. 2WD. Fitted with the following engines: 2.0TFSi Cupra, 2.0TFSi Cupra R, 2.0TFSi Copa Edition, 2.0TFSi Cupra 310 Limited Edition.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825815974226,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"30mm-lowering-springs-seat-leon-1p-2005-2013","title":"30mm Lowering Springs for SEAT Leon (1P) 2005-2013","description":"\u003cp\u003eDrop it. Tighten it. Improve it. The Stance+ Lowering Spring Kit for the Seat Leon (1P) 2WD does all three in a single bolt-on upgrade, dropping ride height by 30mm whilst keeping your factory dampers in place. Suitable for all Seat Leon (1P) 2WD Petrol and Diesel engines including the 1.2TSi, 1.4, 1.4 TSi, 1.8TSi and 1.6TDi, 1.9TDi, 2.0TDi, 2.0TDi FR models. Not suitable for the Cupra models.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 30mm fixed lowering, progressive coil winding, and a 25-30% increased spring rate, all working with your factory dampers.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Seat Leon (1P) (2005-2013) Hatchback. 2WD. Fitted with the following engines: 1.2TSi, 1.4, 1.4 TSi, 1.8TSi, 1.6TDi, 1.9TDi, 2.0TDi, 2.0TDi FR.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816072530,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"45mm-lowering-springs-seat-toledo-1m-1999-2005","title":"45mm Lowering Springs for SEAT Toledo (1M) 1999-2005","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your Seat Toledo (1M) Hatchback 2WD brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 45mm drop together in one straightforward upgrade. Suitable for the 1.9TDi, 2.0 and 2.3V5 engines.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Seat Toledo (1M) Hatchback gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% stiffer than stock, giving your Seat Toledo (1M) Hatchback a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Seat Toledo (1M) Hatchback properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Seat Toledo (1M) (1999-2005) Hatchback. 2WD. Fitted with the following engines: 1.9TDi, 2.0, 2.3V5.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816236370,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"15mm-lowering-springs-seat-toledo-5p-2004-2013","title":"15mm Lowering Springs for SEAT Toledo (5P) 2004-2013","description":"\u003cp\u003eTransform your Seat Toledo Cupra (5P) Hatchback 2WD from standard to seriously sharp with the Stance+ Lowering Spring Kit. A clean 15mm drop, a 25-30% percent uprating over factory, and progressive coil winding combine to give you better looks and tighter handling, all with your existing dampers.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Seat Toledo Cupra (5P) Hatchback 2WD turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Seat Toledo Cupra (5P) Hatchback 2WD a meaningful 15mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal. Suitable for all Seat Toledo Cupra (5P) Hatchback 2WD models including; 2.0TFSi Cupra, 2.0TFSi Cupra R, 2.0TFSi Copa Edition, 2.0TFSi and Cupra 310 Limited Edition.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 15mm Lowering Spring Kit is suitable for: Seat Toledo Cupra (5P) (2004-2013) Hatchback. 2WD. Fitted with the following engines: 2.0TFSi Cupra, 2.0TFSi Cupra R, 2.0TFSi Copa Edition, 2.0TFSi Cupra 310 Limited Edition.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816301906,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"30mm-lowering-springs-seat-toledo-5p-2004-2013","title":"30mm Lowering Springs for SEAT Toledo (5P) 2004-2013","description":"\u003cp\u003eNot every car needs a full coilover setup. The Stance+ Lowering Spring Kit gives your Seat Toledo (5P) Hatchback 2WD Petrol and Diesel engine cars a fixed 30mm drop, sharper handling, and a more aggressive stance at a fraction of the cost. A proper upgrade that takes a fraction of the time to fit.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your Seat Toledo (5P) Hatchback 2WD stays composed through corners without punishing you over rough surfaces. Will fit all Petrol and Diesel engines.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the Seat Toledo (5P) Hatchback 2WD Petrol and Diesel engine cars feel tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your Toledo (5P) sitting properly. 30mm fixed drop, progressively wound for ride quality, and rates uprated enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars. Suitable for all Seat Toledo (5P) Hatchback 2WD Petrol and Diesel engine cars including; 1.2TSi, 1.4, 1.4 TSi, 1.8TSi and 1.9TDi, 2.0TDi. Excluding Cupra and Cupra R models.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: Seat Toledo (5P) (2004-2013) Hatchback. 2WD. Fitted with the following engines: 1.2TSi, 1.4, 1.4 TSi, 1.8TSi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816400210,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"35mm-lowering-springs-skoda-octavia-1u-4motion-1996-2004","title":"35mm Lowering Springs for Skoda Octavia (1U) 4 Motion 1996-2004","description":"\u003cp\u003eGet your Skoda Octavia (1U) 4 Motion Saloon and Estate sitting properly with the Stance+ Lowering Spring Kit. A direct replacement for your factory springs, dropping ride height by 35mm and bringing 25-30% stiffer spring rates for noticeably tighter handling. Backed by a 1-year warranty.\u003c\/p\u003e\n\u003cp\u003eThe progressive wind design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the Skoda Octavia (1U) 4WD 4 Motion Saloon and Estate planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most cost-effective way to lower your Skoda Octavia (1U) 4WD 4 Motion Saloon and Estate properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car. Suitable for the Skoda Octavia (1U) 4WD 4 Motion Saloon and Estate with the following engine sizes; 1.8, 1.8T, 2.0, 2.3 V5, 2.8 V6, 1.9TDi.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Skoda Octavia (1U) (1996-2004) Saloon and Estate. 4Motion. Fitted with the following engines: 1.8, 1.8T, 2.0, 2.3 V5, 2.8 V6, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816564050,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-vauxhall-astra-mk-5-a-h-2004-2010","title":"35mm Lowering Springs for Vauxhall Astra Mk 5 (A\/H) 2004-2010","description":"\u003cp\u003eThe Stance+ Lowering Springs deliver a 35mm fixed drop and a 25-30% uprated spring rate over your factory springs, giving your Vauxhall Astra Mk 5 (A\/H) Van and Estate the perfect stance. Suitable for cars fitted with both Petrol and Diesel engines: 2.0 Turbo, 1.7CDTi and the 1.9CDTi. The Stance+ Lowering Spring Kit offers flatter cornering, less body roll, and a more planted feel through every corner. All whilst working with the factory fit dampers.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eVauxhall Astra Mk 5 (A\/H) Vans and Estates look great when lowered. Our kit lowers 35mm giving the perfect stance. Progressively wound for everyday compliance, and the rates uprated enough to make corners noticeably tighter without giving up the practicality. Only suitable for the Vauxhall Astra Mk 5 (A\/H) Van and Estate, not suitable for Hatchback or GTC models.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Vauxhall Astra MK 5 (A\/H) (2004-2010) Van and Estate. 2WD. Fitted with the following engines: 2.0 Turbo, 1.7CDTi, 1.9CDTi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825816760658,"sku":"SPLS01024A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01024A-box.jpg?v=1787118491"},{"product_id":"40mm-lowering-springs-vauxhall-corsa-c-2001-2006","title":"40mm Lowering Springs for Vauxhall Corsa (C) 2001-2006","description":"\u003cp\u003eLower your Vauxhall Corsa (C) Hatchback by 40mm and feel the difference from the first roundabout. The Stance+ Lowering Spring Kit replaces your factory springs with progressively wound, uprated units that genuinely transform how the car looks and how it drives.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Vauxhall Corsa (C) Hatchback gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your Vauxhall Corsa (C) Hatchback a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Vauxhall Corsa (C) Hatchback a meaningful 40mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal. Suitable for all Vauxhall Corsa (C) Hatchback models fitted with the following engines; 1.0i 12V, 1.2i 16V.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Can be fitted with factory dampers, no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 40mm Lowering Spring Kit is suitable for: Vauxhall Corsa C (A\/H) (2001-2006) Hatchback. 2WD. Fitted with the following engines: 1.0i 12V, 1.2i 16V.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817186642,"sku":"SPLS01098A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01098A-box.jpg?v=1787118490"},{"product_id":"35mm-lowering-springs-vauxhall-vectra-c-2002-2008","title":"35mm Lowering Springs for Vauxhall Vectra (C) 2002-2008","description":"\u003cp\u003eFor drivers who use their Vauxhall Vectra (C) Saloon every day but want it sitting properly, the Stance+ Lowering Spring Kit is the right answer. A fixed 35mm drop, progressive coil winding for ride comfort, and direct compatibility with your factory dampers. Simple, effective, and proven. Only suitable for the Saloon model, this kit will not fit the Estate.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the Vauxhall Vectra (C) Saloon turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance. Suitable for both Petrol and Diesel engines including; 1.6, 1.8, 2.0 16V, 2.0T, 1.9CDTi, 2.0DTi, 2.2DTi and the 3.2V6.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most accessible way to lower your Vauxhall Vectra (C) Saloon properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fitted dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: Vauxhall Vectra C (2002-2008) Saloon. 2WD. Fitted with the following engines: 1.6, 1.8, 2.0 16V, 2.0T, 1.9CDTi, 2.0DTi, 2.2DTi, 3.2V6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817284946,"sku":"SPLS01111A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01111A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-vw-beetle-petrol-9c-1y-1c-1997-2011","title":"45mm Lowering Springs for VW Beetle Petrol (9C\/1Y\/1C) 1997-2011","description":"\u003cp\u003eStance starts here. The Stance+ Lowering Spring Kit gives your VW Beetle (9C\/1Y\/1C) Hatchback and Cabriolet models a clean 45mm drop, fills the wheel arches properly, and tightens the handling, all without the cost or complexity of a coilover swap. The simplest way to get the perfect stance.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your VW Beetle (9C\/1Y\/1C) Hatchback and Cabriolet models) stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the VW Beetle (9C\/1Y\/1C) feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the VW Beetle (9C\/1Y\/1C) and is suitable for the following engine sizes; 1.4, 1.6, 1.8T, 2.0. Petrol and diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 45mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rate, all working with your factory fitted dampers.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Beetle (9C\/1Y\/1C) (1997-2011) Hatchback and Cabriolet. 2WD. Fitted with the following engines: 1.4, 1.6, 1.8T, 2.0L.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817416018,"sku":"SPLS01001A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-vw-beetle-9c-1y-1c-1997-2011","title":"45mm Lowering Springs for VW Beetle (9C\/1Y\/1C) 1997-2011","description":"\u003cp\u003eHigh-tensile chrome silicon steel. Shot-peened for strength. Powder-coated black for weather protection. Progressively wound for a refined ride. The Stance+ Lowering Spring Kit for the VW Beetle (9C\/1Y\/1C) Hatchback and Cabriolet brings proper engineering to a fixed 45mm drop. Only suitable for the 2.3V5 and 1.9TDi.\u003c\/p\u003e\n\u003cp\u003eThe progressive wound design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the VW Beetle (9C\/1Y\/1C) Hatchback and Cabriolet planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your VW Beetle (9C\/1Y\/1C) Hatchback and Cabriolet 2.3V5 and 1.9TDi a meaningful 45mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing factory fitted dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Beetle (9C\/1Y\/1C) (1997-2011) Hatchback and Cabriolet. 2WD. Fitted with the following engines: 2.3V5, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817514322,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"30mm-lowering-springs-vw-beetle-a5-5c-2011-2019","title":"30mm Lowering Springs for VW Beetle (A5\/5C) 2011-2019","description":"\u003cp\u003eThe Stance+ Lowering Springs for the VW Beetle (A5\/5C) Hatchback and Cabriolet are the most cost-effective way to lower your car. Replace your factory springs with these uprated, shorter springs and you'll transform both the looks and the handling of your Volkswagen without needing to swap out your dampers. Suitable for the VW Beetle (A5\/5C) Hatchback and Cabriolet models with the following engine sizes; 1.2TSi, 1.4TSi, 1.8TSi, 2.0TSi, 2.0TFSi, 1.6TDi, 2.0TDi\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThis kit is the simplest way to get your VW Beetle (A5\/5C) Hatchback and Cabriolet sitting properly. 30mm fixed drop, progressively wound for ride quality, and rates uprated enough to make a genuine handling difference. A great first suspension upgrade for daily-driven cars.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: VW Beetle (A5\/5C) (2011-2019) Hatchback and Cabriolet. 2WD. Fitted with the following engines: 1.2TSi, 1.4TSi, 1.8TSi, 2.0TSi, 2.0TFSi, 1.6TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817612626,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"45mm-lowering-springs-vw-bora-petrol-1998-2005","title":"45mm Lowering Springs for VW Bora Petrol 1998-2005","description":"\u003cp\u003eDrop your VW Bora (1J) Saloon 2WD by a fixed 45mm with the Stance+ Lowering Spring Kit. A simple swap with your factory springs delivers a more aggressive stance, sharper handling, and a properly transformed look without the cost or complexity of a full coilover kit. Suitable for the following 4 Cylinder Petrol engine sizes; 1.4, 1.6, 1.6FSi, 1.8, 1.8T and 2.0L.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The VW Bora gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your VW Bora (1J) Saloon 2WD a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the 4 Cylinder Petrol-engined variant of the VW Bora (1J) Saloon 2WD 1998-2005 (1.4, 1.6, 1.6FSi, 1.8, 1.8T, 2.0L). Petrol and Diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 45mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rate, all working with your factory fit dampers.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers can still be used; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Bora (1J) (1998-2005) Saloon. 2WD. Fitted with the following engines: 1.4, 1.6, 1.6FSi, 1.8, 1.8T, 2.0L.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817710930,"sku":"SPLS01001A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-vw-bora-1998-2005","title":"45mm Lowering Springs for VW Bora 1998-2005","description":"\u003cp\u003eIf you're new to modifying your VW Bora (1J) Saloon 2WD and want a clean, effective drop without going the full coilover route, the Stance+ Lowering Spring Kit is the place to start. A 45mm fixed lowering with progressive winding for genuine ride quality, all whilst working with your existing factory dampers. Suitable for the following 4\/5\/6 Cylinder Petrol and Diesel engine sizes; 2.3V5, 2.8VR6, 1.9SDi and 1.9TDi.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the VW Bora (1J) Saloon 2WD turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 45mm fixed lowering, progressive coil winding, and 25-30% increase in spring rate, all working with your factory fit dampers.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the factory fit dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Bora (1J) (1998-2005) Saloon. 2WD. Fitted with the following engines: 2.3V5, 2.8VR6, 1.9SDi, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825817940306,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-vw-golf-mk-4-petrol-1j-1997-2004","title":"45mm Lowering Springs for VW Golf Mk 4 Petrol (1J) 1997-2004","description":"\u003cp\u003eDesigned to work directly with your existing factory dampers, the Stance+ Lowering Spring Kit for the VW Golf Mk 4 (1J) Hatchback and Estate 2WD is the simplest way to drop your car 45mm and noticeably improve the way it handles. No damper changes, no calibration, no fuss.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so VW Golf Mk 4 (1J) Hatchback and Estate 2WD stays composed through corners without punishing you over rough surfaces. Suitable for the following Petrol engine sizes; 1.0, 1.4, 1.6, 1.6FSi, 1.8, 1.8 GTi, and 2.0L.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the VW Golf Mk 4 (1J) Hatchback and Estate 2WD feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the VW Golf Mk 4 (1J) Hatchback and Estate 2WD fitted with the 1.0, 1.4, 1.6, 1.6FSi, 1.8, 1.8 GTi, 2.0L engines. Petrol and diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 45mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rate, all working with your factory fitted dampers.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Golf Mk 4 (1J) (1997-2004) Hatchback and Estate. 2WD. Fitted with the following engines: 1.4, 1.6, 1.6FSi, 1.8, 1.8T, 2.0L.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818038610,"sku":"SPLS01001A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-vw-golf-mk-4-1j-1997-2004","title":"45mm Lowering Springs for VW Golf Mk 4 (1J) 1997-2004","description":"\u003cp\u003eA favourite in the VW scene, the Stance+ Lowering Springs give your VW Golf Mk 4 (1J) Hatchback and Estate 2WD a clean, factory-correct 45mm drop with a progressively wound spring for a refined ride. The most accessible way to lower your Volkswagen properly. Suitable for the following 4\/5\/6 Cylinder Petrol and Diesel engines; 2.3V5, 1.9SDi, 1.9TD and1.9TDi.\u003c\/p\u003e\n\u003cp\u003eThe progressive wind design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the VW Golf Mk 4 (1J) Hatchback and Estate 2WD planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the car handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your VW Golf Mk 4 (1J) Hatchback and Estate 2WD a meaningful 45mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing factory fitted dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: VW Golf Mk 4 (1J) (1997-2004) Hatchback and Estate. 2WD. Fitted with the following engines: 2.3V5, 1.9SDi, 1.9TD, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818136914,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"35mm-lowering-springs-vw-golf-mk-4-1j-4motion-1997-2004","title":"35mm Lowering Springs for VW Golf Mk 4 (1J) 4 Motion 1997-2004","description":"\u003cp\u003eDrop it. Tighten it. Improve it. The Stance+ Lowering Spring Kit for the VW Golf Mk 4 (1J) 2.8 V6 4Motion and 3.2 V6 R32 4Motion does all three in a single bolt-on upgrade, dropping ride height by 35mm whilst keeping your factory dampers in place.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most accessible way to lower your VW Golf Mk 4 (1J) 2.8 V6 4Motion and 3.2 V6 R32 4Motion properly. 35mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 35mm Lowering Spring Kit is suitable for: VW Golf Mk 4 (1J) (1997-2004) Hatchback and Estate. 4Motion. Fitted with the following engines: 2.8V6, 3.2V6 R32.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818333522,"sku":"SPLS01013A","price":89.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01013A-box.jpg?v=1787118490"},{"product_id":"30mm-lowering-springs-vw-golf-mk-5-1k-2003-2008","title":"30mm Lowering Springs for VW Golf Mk 5 (1K) 2003-2008","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your VW Golf Mk 5 (1K) Hatchback 2WD brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 30mm drop together in one straightforward upgrade. Suitable for the following Petrol and Diesel engines; 2.0TFSi GTi, 2.0TFSi GTi Edition 30, 1.9TDi, 2.0SDi and 2.0TDi.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The VW Golf Mk 5 (1K) Hatchback 2WD gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your VW Golf Mk 5 (1K) Hatchback 2WD a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your VW Golf Mk 5 (1K) Hatchback 2WD a meaningful 30mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers can still be used; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: VW Golf Mk 5 (1K) (2003-2008) Hatchback. 2WD. Fitted with the following engines: 2.0TFSi GTi, 2.0TFSi GTi Edition 30, 1.9TDi, 2.0SDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818628434,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"25mm-lowering-springs-vw-golf-mk-6-5k-2008-2012","title":"25mm Lowering Springs for VW Golf Mk 6 (5K) 2008-2012","description":"\u003cp\u003eTransform your VW Golf Mk 6 (5K) Hatchback 2WD 2.0TSi GTi, 2.0TFSi GTi Edition 35 from standard to seriously sharp with the Stance+ Lowering Spring Kit. A clean 25mm drop, a 25-30% uprating over factory, and progressive coil winding combine to give you better looks and tighter handling, all with your existing dampers.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the VW Golf Mk 6 (5K) Hatchback 2WD turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 25mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rate, all working with your factory fitted dampers.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the dampers already on your car. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 25mm Lowering Spring Kit is suitable for: VW Golf Mk 6 (5K) (2008-2012) Hatchback. 2WD. Fitted with the following engines: 2.0TSi GTi, 2.0TFSi GTi Edition 35.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818693970,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"30mm-lowering-springs-vw-golf-mk-6-5k-2008-2012","title":"30mm Lowering Springs for VW Golf Mk 6 (5K) 2008-2012","description":"\u003cp\u003eNot every car needs a full coilover setup. The Stance+ Lowering Spring Kit gives your VW Golf Mk 6 (5K) Hatchback 2WD a fixed 30mm drop, sharper handling, and a more aggressive stance at a fraction of the cost. A proper upgrade that takes a fraction of the time to fit.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your VW Golf Mk 6 (5K) Hatchback 2WD stays composed through corners without punishing you over rough surfaces. Suitable for the following Petrol and Diesel engine sizes; 1.2TSi, 1.4TSi,1.6, 1.6FSi, 2.0FSi, 1.6TDi, 2.0TDi and 2.0GTD.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the VW Golf Mk 6 (5K) Hatchback 2WD feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eFor drivers who want the look and the handling improvement without going the full coilover route, the Stance+ Lowering Spring Kit hits the sweet spot. 30mm fixed lowering, progressive coil winding, and a 25-30% increase in spring rate, all working with your factory fitted dampers.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing factory fit dampers. Have it fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: VW Golf Mk 6 (5K) (2008-2012) Hatchback. 2WD. Fitted with the following engines: 1.2TSi, 1.4TSi,1.6, 1.6FSi, 2.0FSi, 1.6TDi, 2.0TDi, 2.0GTD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825818890578,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"50mm-lowering-springs-vw-transporter-t4-70x-d-1991-2003","title":"50mm Lowering Springs for VW Transporter (T4) (70X\/D) 1991-2003","description":"\u003cp\u003eGet your VW Transporter (T4) Multivan, Caravelle and Bus sitting properly with the Stance+ Lowering Spring Kit. A direct replacement for your factory rear springs, dropping ride height by 50mm and bringing 25-30% stiffer spring rates for noticeably tighter handling. Backed by a 1-year warranty. Suitable for the following Petrol engines; 1.8, 2.0, 2.5 and 2.8VR6.\u003c\/p\u003e\n\u003cp\u003eThe progressive wound design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the VW Transporter (T4) Multivan, Caravelle and Bus planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the van handles without crossing into uncomfortable territory. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered for the rear of the VW Transporter (T4) Multivan, Caravelle and Bus platform, with spring rates tuned to handle the additional kerb weight of a van. It suits both 2WD and 4Motion variants. You will need to adjust the front torsion bar to match the drop of the rear Stance+ springs.\u003c\/p\u003e\n\u003cp\u003eLowered Transporters are a serious presence wherever they roll up, and the Transporter (T4) is one of the most popular vans in the UK scene. The Stance+ 50mm drop is enough to give you that proper stance whilst still allowing the van to function as a van, with progressive winding keeping the ride manageable for everyday use.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T4) (1991-2003) Multivan, Caravelle, Bus. 2WD and 4Motion. Fitted with the following engines: 1.8, 2.0, 2.5, 2.8VR6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819119954,"sku":"SPLS01097A","price":59.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01097A-box.jpg?v=1787118491"},{"product_id":"50mm-lowering-springs-vw-transporter-t4-70x-d-1991-2004","title":"50mm Lowering Springs for VW Transporter (T4) (70X\/D) 1991-2004","description":"\u003cp\u003eThe Stance+ Lowering Springs deliver a 50mm fixed drop on the rear and a 25-30% uprated spring rate over your factory springs, giving your VW Transporter (T4) Multivan, Caravelle and Bus flatter cornering, less body roll, and a more planted feel through every corner. All whilst working with the factory dampers already on your car.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each rear spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered for the rear of the VW Transporter (T4) Multivan, Caravelle and Bus platform, with spring rates tuned to handle the additional kerb weight of a van. It suits both 2WD and 4Motion variants. You will need to adjust the front torsion bar to match the drop of the rear Stance+ springs.\u003c\/p\u003e\n\u003cp\u003eThe Transporter is one of the most modified van platforms in the country, and this kit is engineered specifically to handle the additional weight and length of the van platform. A 50mm drop is a meaningful change on a vehicle this size, and the progressive coil winding stops the ride getting harsh. Suitable for the following Diesel engines; 1.9D, 1.9TD, 2.4D and 2.5TDi.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T4) (1991-2003) Multivan, Caravelle, Bus. 2WD and 4Motion. Fitted with the following engines: 1.9D, 1.9TD, 2.4D, 2.5TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819251026,"sku":"SPLS01097A","price":59.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01097A-box.jpg?v=1787118491"},{"product_id":"50mm-lowering-springs-vw-transporter-t5-70x-d-2003-2015-axle-1500","title":"50mm Lowering Springs for VW Transporter (T5) (70X\/D) 2003-2015 (Front Axle up to 1500kg)","description":"\u003cp\u003eLower your VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 by 50mm and feel the difference from the first drive out. The Stance+ Lowering Spring Kit replaces your factory springs with progressively wound, uprated units that genuinely transform how the van looks and how it drives.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the van settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is matched to the VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 with a 1500kg front axle weight rating or less. Spring rates are tuned for the lighter chassis specification, and it's important to confirm your axle weight rating before ordering, as fitting the wrong kit will affect both ride height and handling.\u003c\/p\u003e\n\u003cp\u003eThe Transporter is one of the most modified van platforms in the country, and this kit is engineered specifically to handle the additional weight and length of the van platform. A 50mm drop is a meaningful change on a vehicle this size, and the progressive coil winding stops the ride being too harsh.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers can still be used; no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the van. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T5\/T5.1) (2003-2015) Panel Van, Combi, Shuttle, Caravelle. T26\/T28\/T30\/T32. 2WD and 4Motion. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front axle max weight up to (1500kg). Rear axle max weight (1560kg).\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819349330,"sku":"SPLS01094A","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01094A-box.jpg?v=1787118489"},{"product_id":"50mm-lowering-springs-vw-transporter-t5-70x-d-2003-2015-axle-1501","title":"50mm Lowering Springs for VW Transporter (T5) (70X\/D) 2003-2015 (Front Axle Over 1501kg)","description":"\u003cp\u003eFor drivers who use their VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 every day but want it sitting properly, the Stance+ Lowering Spring Kit is the right answer. A fixed 50mm drop, progressive coil winding for ride comfort, and direct compatibility with your factory dampers. Simple, effective, and proven.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you'll notice the difference immediately. Body roll is reduced through corners, the VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 turns in more sharply, and the whole van feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThis kit is specifically engineered for the VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 with a front axle weight rating over 1501kg. The spring rates are matched to the heavier chassis specification, so it's essential to check your axle weight rating before ordering. Fitting a kit designed for the lighter axle to a heavier van will result in incorrect ride height and compromised handling.\u003c\/p\u003e\n\u003cp\u003eWhether your VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 is a daily workhorse or a weekend campervan, this kit gives you the lowered look without losing the practicality. 50mm of fixed drop, progressive coil winding for a workable ride, and rates matched to the van's specific weight.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Lowering Spring will fit the VW Transporter (T5\/T5.1) Panel Van, Combi, Shuttle, Caravelle T26\/T28\/T30\/T32 model variants with an axle weight range (Over 1501kg).\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with factory fit dampers. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you're done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T5\/T5.1) (2003-2015) Panel Van, Combi, Shuttle, Caravelle. T26\/T28\/T30\/T32. 2WD and 4Motion. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front axle max weight over (1501kg). Rear axle max weight (1560kg).\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819447634,"sku":"SPLS01094B","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01094B-box.jpg?v=1787118491"},{"product_id":"50mm-lowering-springs-vw-transporter-t6-t6-1-70x-d-2015-2023-axle-1500","title":"50mm Lowering Springs for VW Transporter (T6\/T6.1) (70X\/D) 2015-2023 (Front Axle up to 1500kg)","description":"\u003cp\u003eStance starts here. The Stance+ Lowering Spring Kit gives your VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 a clean 50mm drop, fills the wheel arches properly, and tightens the handling, all without the cost or complexity of a coilover swap. The simplest way to get the van sitting right with the perfect stance.\u003c\/p\u003e\n\u003cp\u003eThe springs are progressively wound, which is the key to getting genuine ride quality out of a shorter, stiffer setup. The varying coil spacing gives a softer initial rate for everyday comfort and a firmer rate as the suspension loads up, so your VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 stays composed through corners without punishing you over rough surfaces.\u003c\/p\u003e\n\u003cp\u003eWith springs uprated 25-30% over factory specification, the VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 feels tighter and more connected straight away. Cornering flatter, less wallow over crests and dips, more confident steering response. The chrome silicon steel construction is shot-peened for fatigue resistance, and the powder-coat finish keeps things looking right through years of road use.\u003c\/p\u003e\n\u003cp\u003eThis kit is matched to the VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 with a 1500kg or less front axle weight rating. Spring rates are tuned for the lighter chassis specification, and it's important to confirm your axle weight rating before ordering, as fitting the wrong kit will affect both ride height and handling.\u003c\/p\u003e\n\u003cp\u003eLowered Transporters are a serious presence wherever they roll up, and the Transporter (T6\/T6.1) is one of the most popular vans in the UK scene. The Stance+ 50mm drop is enough to give you that proper stance whilst still allowing the van to function as a van, with progressive winding keeping the ride manageable for everyday use.\u003c\/p\u003e\n\u003cp\u003eSprings fit directly in place of your factory items, working with your existing factory dampers. Have the kit fitted by a qualified mechanic and get the geometry reset on a laser alignment machine afterwards. Backed by a 1-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T6\/T6.1) (2015-2023) Panel Van, Combi, Shuttle, Caravelle. T26\/T28\/T30\/T32. 2WD and 4Motion. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front axle max weight up to (1500kg). Rear axle max weight (1560kg).\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819545938,"sku":"SPLS01094A","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01094A-box.jpg?v=1787118489"},{"product_id":"50mm-lowering-springs-vw-transporter-t6-t6-1-70x-d-2015-2024-axle-1501","title":"50mm Lowering Springs for VW Transporter (T6\/T6.1) (70X\/D) 2015-2024 (Front Axle Over 1501kg)","description":"\u003cp\u003eHigh-tensile chrome silicon steel. Shot-peened for strength. Powder-coated black for weather protection. Progressively wound for a refined ride quality. The Stance+ Lowering Spring Kit for the VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 brings proper engineering to a fixed 50mm drop.\u003c\/p\u003e\n\u003cp\u003eThe progressive wound design is what gives these springs their broad usability. Light bumps and small road imperfections compress the looser top coils for a comfortable ride. Push harder into a corner and the tighter lower coils take over, giving you the firmer rate that controls body roll and keeps the VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 planted. One spring, two characters, depending on what you ask of it.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ springs are around 25-30% stiffer than the factory springs, which is enough to make a real difference to how the van handles without making the ride quality too harsh. You'll feel less body roll in corners, a quicker turn-in response, and a more planted feel at speed. Materials are high-grade: shot-peened chrome silicon steel, powder-coated black.\u003c\/p\u003e\n\u003cp\u003eThis kit is specifically engineered for the T6\/T6.1 Transporter with a front axle weight rating over 1501kg. The spring rates are matched to the heavier chassis specification, so it's essential to check your axle weight rating before ordering. Fitting a kit designed for the lighter axle to a heavier van will result in incorrect ride height and compromised handling.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Lowering Spring will fit the VW Transporter (T6\/T6.1) Panel Van, Combi, Shuttle and Caravelle T26\/T28\/T30\/T32 model variants with an axle weight (Over 1501kg).\u003c\/p\u003e\n\u003cp\u003eThe Transporter is one of the most modified van platforms in the country, and this kit is engineered specifically to handle the additional weight and length of the van platform. A 50mm drop is a meaningful change on a vehicle this size, and the progressive coil winding stops the ride getting too harsh.\u003c\/p\u003e\n\u003cp\u003eThe springs are a direct replacement for your factory items and work with your existing factory fitted dampers. We always recommend professional fitting by a qualified mechanic, and a full alignment reset on a proper laser machine once installed. Stance+ Lowering Springs are backed by a 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 50mm Lowering Spring Kit is suitable for: VW Transporter (T6\/T6.1) (2015-2023) Panel Van, Combi, Shuttle, Caravelle. T26\/T28\/T30\/T32. 2WD and 4Motion. Fitted with the following engines: 2.0, 2.0TSi, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi. Front axle max weight over (1501kg). Rear axle max weight (1560kg).\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825819677010,"sku":"SPLS01094B","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01094B-box.jpg?v=1787118491"},{"product_id":"45mm-lowering-springs-audi-a3-petrol-8l-1996-2002","title":"45mm Lowering Springs for Audi A3 Petrol (8L) 1996-2002","description":"\u003cp\u003eThe Stance+ Lowering Springs for the Audi A3 (8L) 2WD Hatchback are the most cost-effective way to lower your car. Replace your factory springs with these uprated, shorter springs and you'll transform both the looks and the handling of your Audi without needing to swap out your dampers.\u003c\/p\u003e\n\u003cp\u003eProgressive coil winding is the technical detail that sets these springs apart from a basic shorter spring. The coil spacing varies along the length of the spring, which means the rate is softer at the top of the travel for straight-line comfort and stiffens as the spring compresses under cornering load. The result is a ride quality that holds up for daily driving but firms up exactly when you need it.\u003c\/p\u003e\n\u003cp\u003eThe springs run roughly 25-30% stiffer than standard, which translates to noticeably less body roll, sharper turn-in, and a more controlled feel through quick changes of direction. Each spring is shot-peened chrome silicon steel with a black powder-coated finish, built to handle British weather and last the long haul.\u003c\/p\u003e\n\u003cp\u003eThis kit is engineered specifically for the Petrol-engined variant of the Audi A3 (8L) 2WD Hatchback and are designed to fit the 1.6, 1.8 and 1.8T Petrol engines. Petrol and Diesel models often have different front-end weights, which means a kit tuned for one won't always give the correct ride height on the other. Always check your engine type before ordering.\u003c\/p\u003e\n\u003cp\u003eDesigned to suit daily driven cars, this kit gives your Audi A3 (8L) 2WD Hatchback a meaningful 45mm drop and proper handling improvements without the cost or complexity of a coilover kit. Progressive winding makes the everyday compromise minimal.\u003c\/p\u003e\n\u003cp\u003eThis is a simple bolt-on swap with your factory springs. No damper change required, no calibration needed. Professional fitting and a full alignment reset are essential once installed. Stance+ Lowering Springs come with a 1-year warranty for peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Audi A3 (8L) (1996-2002) Hatchback. 2WD. Fitted with the following engines: 1.6, 1.8, 1.8T.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825888063826,"sku":"SPLS01001A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001A-box.jpg?v=1787118489"},{"product_id":"45mm-lowering-springs-audi-a3-diesel-8l-1996-2002","title":"45mm Lowering Springs for Audi A3 Diesel (8L) 1996-2002","description":"\u003cp\u003eDrop your Audi A3 1.9TDi (8L) 2WD Hatchback by a fixed 45mm with the Stance+ Lowering Spring Kit. A simple swap with your factory springs delivers a more aggressive stance, sharper handling, and a properly transformed look without the cost or complexity of a full coilover kit.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate isn't constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The Audi A3 1.9TDi (8L) 2WD Hatchback gets noticeably less body roll without the harshness you'd expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your Audi A3 1.9TDi (8L) 2WD Hatchback a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the diesel-engined variant of the Audi A3 (8L). Diesel engines typically carry more weight up front than petrol equivalents, and this kit is rate-matched to suit. Fitting a petrol-spec kit to a diesel car will leave the front sitting too low.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Lowering Spring Kit is the most accessible way to lower your Audi A3 1.9TDi (8L) 2WD Hatchback properly. 45mm fixed drop, no damper change required, and a progressively wound coil design that genuinely improves the ride and handling rather than just dropping the car.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Can be used with your factory fit dampers, no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 45mm Lowering Spring Kit is suitable for: Audi A3 (8L) (1996-2002) Hatchback. 2WD. Fitted with the following engines: 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52825888883026,"sku":"SPLS01001B","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01001B-box.jpg?v=1787118489"},{"product_id":"25mm-lowering-springs-vw-scirocco-mk-3-17-2008-2017","title":"25mm Lowering Springs for VW Scirocco Mk 3 (17) 2008-2017","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, the Lowering Spring Kit for your VW Scirocco Mk 3 (17) Coupe brings high-tensile chrome silicon steel construction, progressive winding, and a fixed 25mm drop together in one straightforward upgrade. Suitable for both 2.0TFSi and 2.0TFSi R.\u003c\/p\u003e\n\u003cp\u003eProgressive winding means the coil rate is not constant from end to end. The top of the spring uses wider coil spacing for a softer rate, giving you the compliance you want for everyday driving. As the spring compresses under cornering load, the tighter lower coils take over and the rate climbs. The VW Scirocco Mk 3 (17) Coupe gets noticeably less body roll without the harshness you would expect from a stiffer spring.\u003c\/p\u003e\n\u003cp\u003eSpring rates are set approximately 25-30% above factory, giving your VW Scirocco Mk 3 (17) Coupe a noticeably sportier character without being uncomfortably stiff. Body roll is cut down, steering response sharpens, and the car settles more quickly over bumps. Built from high-tensile chrome silicon steel, shot-peened and powder-coated for durability.\u003c\/p\u003e\n\u003cp\u003eThe Scirocco Mk 3 is a car that genuinely rewards being lowered. That clean coupe roofline and wide stance looks exactly right with a 25mm drop filling the arches. The Stance+ spring kit delivers that without the cost or complexity of a coilover kit, and without touching your factory dampers.\u003c\/p\u003e\n\u003cp\u003eA direct swap with your factory springs. Your existing dampers stay in place and no calibration is required. Professional fitting is recommended, and a proper laser alignment must be carried out once the kit is on the car. 1-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 25mm Lowering Spring Kit is suitable for: VW Scirocco Mk 3 (17) (2008-2017) Coupe. 2WD and 4 Motion. Fitted with the following engines: 2.0TFSi, 2.0TFSi R.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53752877875538,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"},{"product_id":"30mm-lowering-springs-vw-scirocco-mk-3-17-2008-2017","title":"30mm Lowering Springs for VW Scirocco Mk 3 (17) 2008-2017","description":"\u003cp\u003eNot every Scirocco owner needs to go the full coilover route. The Stance+ Lowering Spring Kit gives your VW Scirocco Mk 3 (17) Coupe a fixed 30mm drop, sharper handling, and a more aggressive stance at a fraction of the cost. A proper upgrade with a fraction of the complexity. Suitable for 1.4TSi, 2.0TSi Petrol and 2.0TDi Diesel engines.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Stance+ springs feel different to a cheap drop spring is the progressive winding. The coils are spaced unevenly along the spring's length, giving a softer initial rate that handles potholes and motorway expansion joints without harshness, and a firmer rate as the spring loads up in corners. Body roll drops, the ride stays civilised.\u003c\/p\u003e\n\u003cp\u003eAt 25-30% stiffer than the factory springs, you will notice the difference immediately. Body roll is reduced through corners, the VW Scirocco Mk 3 (17) Coupe turns in more sharply, and the whole car feels tighter and more responsive. The springs are made from high-tensile chrome silicon steel, shot-peened for strength and powder-coated black for long-term corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThe Scirocco Mk 3 has the sort of proportions that look exactly right when it is sitting 30mm lower. The Stance+ kit delivers that, plus a genuine improvement in the way the car handles, without the cost of a coilover kit and without requiring any changes to your existing dampers.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: these springs swap directly with your factory items and work with the dampers already on your car. Have the kit fitted by a qualified technician, get the tracking and alignment reset, and you are done. 1-year warranty included with every kit.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ 30mm Lowering Spring Kit is suitable for: VW Scirocco Mk 3 (17) (2008-2017) Coupe. 2WD. Fitted with the following engines: 1.4TSi, 2.0TSi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53752878006610,"sku":"SPLS01036A","price":79.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPLS01036A-box.jpg?v=1787117109"}],"url":"https:\/\/stanceplus.com\/collections\/lowering-springs.oembed","provider":"STANCE+","version":"1.0","type":"link"}