{"title":"Camber Correction","description":"","products":[{"product_id":"adjustable-camber-bolt-kit-10mm","title":"Adjustable Camber Bolt Kit 10mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 10mm bolt suits smaller and older hub carriers, common on lighter hatchbacks and city cars.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319382892882,"sku":"CB10","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB10_1.jpg?v=1787117169"},{"product_id":"adjustable-camber-bolt-kit-12mm","title":"Adjustable Camber Bolt Kit 12mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 12mm bolt is one of the most common sizes, found across a huge range of mainstream hatchbacks and saloons.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319382925650,"sku":"CB12","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB12_1.jpg?v=1787117170"},{"product_id":"adjustable-camber-bolt-kit-14mm","title":"Adjustable Camber Bolt Kit 14mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 14mm bolt fits the larger hub carriers used on many heavier saloons, estates and performance cars.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319382958418,"sku":"CB14","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB14_1.jpg?v=1787117170"},{"product_id":"adjustable-camber-bolt-kit-15mm","title":"Adjustable Camber Bolt Kit 15mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 15mm bolt covers larger executive and performance applications where the factory strut bolt steps up in size.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319382991186,"sku":"CB15","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB15_1.jpg?v=1787117110"},{"product_id":"adjustable-camber-bolt-kit-16mm","title":"Adjustable Camber Bolt Kit 16mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 16mm bolt suits the bigger hub carriers found on larger saloons, estates and SUVs.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383023954,"sku":"CB16","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB15_1.jpg?v=1787117110"},{"product_id":"adjustable-camber-bolt-kit-17mm","title":"Adjustable Camber Bolt Kit 17mm","description":"\u003cp\u003eWheel camber is the tilt of the tyre as viewed from the front or rear of the car. When you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. Left uncorrected, this causes uneven tyre wear, affects braking performance and can compromise handling.\u003c\/p\u003e\n\u003cp\u003eThe 17mm bolt is the largest in the range, made for the biggest hub carriers on large saloons and SUVs.\u003c\/p\u003e\n\u003cp\u003eStance+ Camber Bolts are a straightforward, cost-effective solution for correcting front or rear camber on lowered cars. They replace the factory suspension strut bolt with an eccentric lobe bolt that allows the hub to be tilted, giving you precise camber adjustment without changing any other suspension components.\u003c\/p\u003e\n\u003cp\u003eMade from high-strength steel and zinc plated for corrosion resistance, Stance+ Camber Bolts give up to 1.75 degrees of positive or negative camber adjustment. Supplied as a pair, one kit is required per axle. Fitment takes approximately 30 minutes per axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise that all Stance+ Camber Bolt kits are fitted by a qualified vehicle mechanic or trained vehicle technician. Once fitted, always have the alignment reset using a suitable laser alignment machine.\u003c\/p\u003e\n\u003cp\u003eFitting Stance+ Camber Bolts: First take a baseline camber reading to determine whether your car needs a positive or negative camber correction. Raise the vehicle safely and remove the wheel. Remove the top suspension bolt and loosen the bottom bolt. Replace the top factory bolt with the Stance+ camber bolt. With the large tab on the washer pointing towards the centre of the car, this gives negative camber. With the large tab pointing towards the wheel, this gives positive camber. Loosen the bolt and rotate the inner lobe for fine adjustment. Once the desired setting is achieved, torque all bolts back to factory settings. Road test the vehicle, then re-check torque and camber angle.\u003c\/p\u003e\n\u003cp\u003eFitment note: These are universal camber bolts, sized by the diameter of the original bolt they replace. Please confirm your hub carrier bolt diameter before ordering. Refer to our vehicle fitment list or contact us if you are unsure.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383056722,"sku":"CB17","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/CB15_1.jpg?v=1787117110"},{"product_id":"blue-ez-rear-camber-shim-kit","title":"Blue EZ Rear Camber Shim Kit","description":"\u003cp\u003eStance+ Blue EZ Camber Shims are precision-engineered suspension components used to correct rear wheel camber and toe on cars fitted with a solid or fixed beam rear axle. These are the vehicles where factory camber adjustment is limited or simply does not exist, including many popular Audi, Chevrolet, Chrysler, Nissan, Renault, Seat, Skoda, Suzuki, Vauxhall and VW models.\u003c\/p\u003e\n\u003cp\u003eUnlike camber bolts, which replace a strut bolt to tilt the hub, Stance+ Camber Shims are inserted directly between the rear wheel hub assembly and the rear beam or axle. The varying thickness of the shim tilts the hub relative to the axle, correcting the angle of the wheel without drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003eWhen a car fitted with a fixed beam rear axle is lowered, the beam geometry causes the rear wheels to take on excessive negative camber. Left uncorrected, this results in uneven tyre wear on the inner edge and reduced tyre contact with the road surface. Stance+ Camber Shims are a clean, reversible fix that puts the geometry back where it should be.\u003c\/p\u003e\n\u003cp\u003eSupplied as an axle kit (pair of shims). One kit required per car. Fitment takes approximately 40 to 60 minutes.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.\u003c\/p\u003e\n\u003cp\u003eFitment note: For use on the rear of cars fitted with a fixed beam rear axle only. Refer to our vehicle fitment list to confirm compatibility before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383122258,"sku":"SPCK75200","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/5.75200K_01.jpg?v=1787117110"},{"product_id":"grey-ez-rear-camber-shim-kit","title":"Grey EZ Rear Camber Shim Kit","description":"\u003cp\u003eStance+ Grey EZ Camber Shims are precision-engineered suspension components used to correct rear wheel camber and toe on cars fitted with a solid or fixed beam rear axle. These are the vehicles where factory camber adjustment is limited or simply does not exist, including many popular Audi, Chrysler, Ford, Mazda, MG, Rover and Vauxhall models.\u003c\/p\u003e\n\u003cp\u003eUnlike camber bolts, which replace a strut bolt to tilt the hub, Stance+ Camber Shims are inserted directly between the rear wheel hub assembly and the rear beam or axle. The varying thickness of the shim tilts the hub relative to the axle, correcting the angle of the wheel without drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003eWhen a car fitted with a fixed beam rear axle is lowered, the beam geometry causes the rear wheels to take on excessive negative camber. Left uncorrected, this results in uneven tyre wear on the inner edge and reduced tyre contact with the road surface. Stance+ Camber Shims are a clean, reversible fix that puts the geometry back where it should be.\u003c\/p\u003e\n\u003cp\u003eSupplied as an axle kit (pair of shims). One kit required per car. Fitment takes approximately 40 to 60 minutes.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.\u003c\/p\u003e\n\u003cp\u003eFitment note: For use on the rear of cars fitted with a fixed beam rear axle only. Refer to our vehicle fitment list to confirm compatibility before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383155026,"sku":"SPCK75400","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/5.75400K_01.jpg?v=1787117110"},{"product_id":"red-ez-rear-camber-shim-kit","title":"Red EZ Rear Camber Shim Kit","description":"\u003cp\u003eStance+ Red EZ Camber Shims are precision-engineered suspension components used to correct rear wheel camber and toe on cars fitted with a solid or fixed beam rear axle. These are the vehicles where factory camber adjustment is limited or simply does not exist, including many popular Honda, Hyundai, Mitsubishi, Nissan, Toyota, Vauxhall and VW models.\u003c\/p\u003e\n\u003cp\u003eUnlike camber bolts, which replace a strut bolt to tilt the hub, Stance+ Camber Shims are inserted directly between the rear wheel hub assembly and the rear beam or axle. The varying thickness of the shim tilts the hub relative to the axle, correcting the angle of the wheel without drilling or permanent modification.\u003c\/p\u003e\n\u003cp\u003eWhen a car fitted with a fixed beam rear axle is lowered, the beam geometry causes the rear wheels to take on excessive negative camber. Left uncorrected, this results in uneven tyre wear on the inner edge and reduced tyre contact with the road surface. Stance+ Camber Shims are a clean, reversible fix that puts the geometry back where it should be.\u003c\/p\u003e\n\u003cp\u003eSupplied as an axle kit (pair of shims). One kit required per car. Fitment takes approximately 40 to 60 minutes.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.\u003c\/p\u003e\n\u003cp\u003eFitment note: For use on the rear of cars fitted with a fixed beam rear axle only. Refer to our vehicle fitment list to confirm compatibility before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383187794,"sku":"SPCK75800","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/5.75800K_01.jpg?v=1787117110"},{"product_id":"camber-caster-adjustable-polyurethane-top-mount-set","title":"Eibach Camber and Caster Adjustable Polyurethane Top Mount Set","description":"\u003cp\u003eWhen you lower a car, you change the camber and caster settings. The lower you go, the more negative camber you run. On the VW Golf MK4 platform vehicles the front suspension strut slides into the front hub so unfortunately Camber Bolts cannot be used. Instead, you need a camber and caster adjustable top mount to sort out the front suspension geometry.\u003c\/p\u003e\n\u003cp\u003eWe can now offer these Eibach camber and caster adjustable polyurethane top mount kits. Suitable for: Audi A3 (8L), Audi TT (8N3\/8N9), Seat Leon (1M), Seat Toledo MK2 (1M), Skoda Octavia (1U), VW Beetle (9C\/1Y\/1C), VW Bora (1J) and VW Golf MK4 (1J). The Stance+ Camber and Caster Adjustable Top Mount Set is the answer for rectifying front suspension camber\/caster issues on all VW Golf MK4 platform vehicles. They are suitable for all 2WD, 4 Motion and Quattro models mentioned above.\u003c\/p\u003e\n\u003cp\u003eThis Eibach 8-piece polyurethane top mount set replaces the factory front strut top mount assembly on each side, giving you up to +\/-1.0 degree of positive or negative camber correction, combined with caster adjustment. Unlike a simple camber bolt which only tilts the hub at the lower mounting point, adjusting the top mount changes the geometry at the top of the strut, giving more precise and consistent correction across the full range of suspension travel.\u003c\/p\u003e\n\u003cp\u003eThis kit is especially effective on VW\/Audi group cars running coilover suspension with a significant drop. It uses the factory original mounting bolts and factory torque settings, so there is no need for special hardware. Supplied as a pair, one kit covers both front corners. Fitment takes approximately 40 to 60 minutes.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.\u003c\/p\u003e\n\u003cp\u003eFitment note: For use on VW Golf Mk4 platform VW Group vehicles only. Refer to our vehicle fitment list to confirm compatibility before ordering. Recommended for use with the Stance+ Rear Nylon Camber Shim Kit with Caliper Corrector for a complete front and rear geometry correction solution.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383286098,"sku":"5.81340K","price":199.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/5.81340K_Box.jpg?v=1787117111"},{"product_id":"rear-nylon-camber-shim-kit-with-caliper-corrector","title":"Rear Nylon Camber Shim Kit with Caliper Corrector","description":"\u003cp\u003eWhen a car fitted with a fixed beam rear axle is lowered, the rear wheels take on excessive negative camber. On the VW Golf MK4 platform, this can also affect rear toe. Left uncorrected, the result is uneven tyre wear on the inner edge, reduced tyre contact with the road surface and compromised handling.\u003c\/p\u003e\n\u003cp\u003eStance+ Rear Nylon Camber Shims correct rear camber on these fixed beam axle applications. The camber shims fit between the stub axle and the beam, tilting the hub to bring the rear wheels back into proper alignment. The kit is designed to work alongside the Stance+ Camber and Caster Adjustable Polyurethane Top Mount Set, giving a complete front and rear geometry correction solution for heavily lowered VW Golf MK4 platform cars. Suitable for: Audi A3 (8L), Audi TT (8N3\/8N9), Seat Leon (1M), Seat Toledo MK2 (1M), Skoda Octavia (1U), VW Beetle (9C\/1Y\/1C), VW Bora (1J) and VW Golf MK4 (1J). Only suitable for 2WD models. If you have a 4 Motion or Quattro variant of the above, you will need to look at our Stance+ Camber Adjustable Rear Control Arms.\u003c\/p\u003e\n\u003cp\u003eThis camber adjustment kit for the VW Golf MK4 2WD platform cars also includes the Stance+ brake caliper correction shim kit, supplied in 8 individual pieces (4 pairs of varying width shims). When camber is adjusted on these cars, the caliper position relative to the disc can change slightly. These nylon shims correct this, ensuring even brake pad wear across the full face of the disc after fitting.\u003c\/p\u003e\n\u003cp\u003eSupplied as an axle kit. Fitment takes approximately 40 to 60 minutes.\u003c\/p\u003e\n\u003cp\u003eKit contains: 1 x 5.75970k caliper shim kit (for both rear calipers), 2 x 5.71532k (+0.5 degree camber shims), 2 x 5.71533k (+1.0 degree camber shims). This kit offers a range of rear camber adjustment from: +0.5 degree, +1.0 degree and +1.5 degrees (when both shims are used together) on each axle.\u003c\/p\u003e\n\u003cp\u003eFor safety reasons we strongly advise fitting is carried out by a qualified vehicle mechanic or trained vehicle technician. Always have the alignment reset using a suitable laser alignment machine after fitting.\u003c\/p\u003e\n\u003cp\u003eFitment note: For use on VW Golf Mk4 platform VW Group vehicles only. Refer to our vehicle fitment list to confirm compatibility before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53319383351634,"sku":"SPCK71533","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/Camber_Kit-S.71532K_S.71533K_Box.jpg?v=1787117110"},{"product_id":"camber-adjustable-rear-control-arms-for-audi-a3-8l-quattro-1996-2003","title":"Camber Adjustable Rear Control Arms for Audi A3 (8L) Quattro 1996-2003","description":"\u003cp\u003eLowering your Audi A3 (8L) 1.8T S3 Quattro or Audi A3 (8L) 1.8T\/1.9TDi Quattro will increase rear negative camber quite significantly. This negative camber causes excessive tyre wear normally on the inside edge of the rear tyres. The lower you go the more the negative camber increases and the worse the tyre wear becomes.\u003c\/p\u003e\n\u003cp\u003eThe Audi A3 (8L) Quattro platform sits low from the factory with slight negative camber as standard but drop it further than 30mm on lowering springs or coilovers and the rear independent wishbone suspension suffers from excessive negative camber.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Camber Adjustable Rear Control Arms allow you to neutralise the excessive negative camber and bring the tyre back in line with manufacturers settings, ensuring a perfectly flat tyre contact patch with the road.\u003c\/p\u003e\n\u003cp\u003eFitting takes around twenty minutes a side, and you keep the lowered look without damaging and scrubbing the tyres.\u003c\/p\u003e\n\u003cp\u003eWorth doing on any Audi A3 (8L) Quattro platform car running more than a 30mm drop, and pretty much mandatory on a coilover equipped car running 40mm or lower.\u003c\/p\u003e\n\u003cp\u003eThe heavy-duty rubber bushes also tighten up rear-end response, so the car feels sharper through quick directional changes. Built tough enough for fast road and the occasional track day, with a powder-coated finish that stands up to British winters.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Audi A3. (8L). (1996-2003). Engines: 1.8T, 1.8T S3, 1.9TDi. Hatchback. Quattro.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320477376850,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-audi-tt-8n-quattro-1998-2006","title":"Camber Adjustable Rear Control Arms for Audi TT (8N) Quattro 1998-2006","description":"\u003cp\u003eThe Audi TT (8N) Coupe and Roadster Quattro is one of those cars that responds well to being lowered. The car looks more aggressive, and the car handles better than factory. Lowering more than 30mm and you will notice the rear tyres start to tilt inwards at the top.\u003c\/p\u003e\n\u003cp\u003eThe rear suspension runs a wishbone system, the lower you go the more negative camber is generated. Excessive camber increases tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. The only way to sort this excessive camber issue is to fit some adjustable length rear control arms so the excessive camber can be neutralised.\u003c\/p\u003e\n\u003cp\u003eWhether you are running the Audi TT (8N) 1.8T Quattro or the Audi TT (8N) 3.2 V6 Quattro, the symptoms of excessive negative camber are the same: scrubbed inside tyre wear and reduced rear end grip, and a car that feels nervous mid-corner instead of planted. Bolt these Stance+ Adjustable Rear Camber Arms into place and get a professional laser alignment carried out afterwards, and the TT will probably drive better than Audi intended.\u003c\/p\u003e\n\u003cp\u003eThe car will feel more planted through tight sweeping bends, and you will feel a huge improvement in on road handling. Suitable for both the hard top Coupe and Cabriolet models.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Rear Camber Control Arms or Adjustable Rear Tie bars (as they are also known) are a direct replacement for the factory items on the rear of your Audi TT (8N) Quattro. They are designed to replace the top factory tie bars on the rear arms.\u003c\/p\u003e\n\u003cp\u003eThey make a particularly noticeable difference on V6 cars where the extra weight up front means the rear axle is already working hard. The uprated rubber bushes hold the geometry securely under load, so the back of the car feels more composed when pushed to the limit.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Audi TT. (8N). (1998-2006). Engines: 1.8T, 3.2 V6. Coupe \/ Roadster. Quattro.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320477409618,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-3-series-e36-inc-m3-1991-2000","title":"Camber Adjustable Rear Control Arms for BMW 3 Series (E36) inc. M3 1991-2000","description":"\u003cp\u003eThe BMW E36 is the godfather of modern stance culture. Touring, Saloon, Coupe, Cabriolet, M3, all of them look the absolute business sat low on a set of staggered wheels. The trouble is the rear semi-trailing arm suspension setup gives you almost no factory camber adjustment, so once the car is dropped, you are stuck with whatever rear camber the lowered geometry hands you. Which is usually too much.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection.\u003c\/p\u003e\n\u003cp\u003eOur Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber. The arms are adjustable in length so you can set anything between 3.5 degrees negative or 1 degree of positive camber.\u003c\/p\u003e\n\u003cp\u003eAdjustable camber control arms are a very popular tuning modification for any lowered BMW E36. They fit all models including Cabriolet, Saloon, Coupe and Touring models.\u003c\/p\u003e\n\u003cp\u003eThey fit all engine sizes including the 3.2 M3 model. The Stance+ Adjustable Camber Control Arms replace the fixed length factory arms with fully adjustable items, giving you the room to set up rear camber correctly even at very low ride heights. Without them, the rear inner tyre wear on a very low BMW E36 will be significant.\u003c\/p\u003e\n\u003cp\u003eUprated heavy duty rubber bushes also sharpen up rear-end feel, which is exactly what you want from a fast BMW 3 Series E36. Once the camber arms have been fitted the car will need a full professional wheel alignment. We recommend the Hunter brand which most well-equipped garage and workshops use.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW 3 Series. (E36). (1991-2000). Engines: 316i, 318i, 318is, 320i, 323i, 325i, 328i, 3.2 M3. Cabriolet \/ Saloon \/ Coupe \/ Touring. RWD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320478228818,"sku":"SPCCA002","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA002-Box2.jpg?v=1792763853"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-3-series-e90-e91-e92-e93-2005-2013","title":"Camber Adjustable Rear Control Arms for BMW 3 Series (E90\/E91\/E92\/E93) 2005-2013","description":"\u003cp\u003eThe BMW E90-93 Series is extremely popular car to modify in the UK and for good reason. The car has a timeless classic design, that's enhanced even more when it has been lowered on a set of aftermarket wheels.\u003c\/p\u003e\n\u003cp\u003eWe sell hundreds of coilover kits for the BMW E90 platform every year. Most people are happy with a 30-40mm drop however some prefer a much lower stance. This increase in drop means the car starts running an increased amount of negative camber, particularly on the rear.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThe arms are adjustable in length so you can set anything between 3 degrees negative or 3 degrees positive camber.\u003c\/p\u003e\n\u003cp\u003eThese adjustable camber arms will fit all makes and models of the BMW E9x range including; E90 Saloon, E91 Touring, E92 Coupe and E93 Cabriolet. They will fit all RWD Petrol and Deisel engines excluding the X-Drive and M3 models.\u003c\/p\u003e\n\u003cp\u003eOur Stance+ Camber Control Arms use uprated heavy duty rubber bushes which sharpen up rear-end feel, which is exactly what you want from a fast BMW 3 Series E9x. Once the camber arms have been fitted the car will need a full professional wheel alignment. We recommend the Hunter brand which most well-equipped garage and workshops use.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW 3 Series. (E90\/E91\/E92\/E93). (2005-2013). Engines: 316i, 318i, 320i, 323i, 325i, 328i, 330i, 335i, 316D, 318D, 320D, 325D, 330D. Saloon \/ Touring \/ Coupe \/ Cabriolet. RWD. Will not fit X-Drive models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320478327122,"sku":"SPCCA004","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA004-Box.jpg?v=1792764381"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-z1-1989-1991","title":"Camber Adjustable Rear Control Arms for BMW Z1 1989-1991","description":"\u003cp\u003eThe BMW Z1 is one of the rarest BMWs you will ever see on the road, they are available as a Roadster or Coupe and look great straight from the factory. However, there are a few owners out there that are not happy with the ride height of the car and decide they want to lower it.\u003c\/p\u003e\n\u003cp\u003eLowering increases the negative camber on the rear axle. Our Stance+ Camber Adjustable Rear Control Arms will help rectify this and return the camber angles back to factory specification.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber caused by lowering the car increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection.\u003c\/p\u003e\n\u003cp\u003eA specialist part for a specialist car, and if you are running a lowered BMW Z1 they are exactly what you need to get the rear suspension geometry back to a safe and sensible setting.\u003c\/p\u003e\n\u003cp\u003eGiven how rare and valuable these cars are getting, looking after the rear tyres and the way the chassis drives is worth doing properly.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber suspension bushes also outlast the original factory rubber. The powder-coated finish protects against harsh British winters. A simple twenty-minute fit per side, no fabrication required.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW Z1. (1989-1991). Engines: 2.5. Roadster. RWD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320478392658,"sku":"SPCCA002","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA002-Box2.jpg?v=1792763853"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-z4-e85-e86-e89-inc-z4m-2003-2016","title":"Camber Adjustable Rear Control Arms for BMW Z4 (E85\/E86\/E89) inc. Z4 M 2003-2016","description":"\u003cp\u003eThe BMW Z4 E85, E86 and E89 share a multi-link rear suspension that delivers genuinely impressive handling at standard ride height, and even better handling once the car has been lowered, we sell a lot of our Stance+ Coilover Kits for this platform.\u003c\/p\u003e\n\u003cp\u003eMost customers lower the Z4 by a modest amount, around 10-15mm, however some customers prefer a more aggressive drop which causes the rear suspension to run increased levels of negative camber.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber caused by lowering the car increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms are the professional solution to sorting out the camber issues on any BMW Z4 (E85\/E86\/E89) chassis.\u003c\/p\u003e\n\u003cp\u003eBMW Z4 Roadster or Coupe, the fitment is the same. Worth doing as part of any serious lowering setup, particularly if the car is used for occasional track work.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber suspension bushes also tighten up the rear-end response. The powder-coated finish handles winter salt without complaint. A simple twenty-minute fit per side, no fabrication required, no special tools needed.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW Z4 \/ Z4M. (E85\/E86\/E89). (2003-2016). Engines: 2.0, 2.2, 3.2, 2.5, 3.0, 3.0 Twin Turbo, 3.2 M. Roadster\/Coupe. RWD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320478523730,"sku":"SPCCA002","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA002-Box2.jpg?v=1792763853"},{"product_id":"camber-adjustable-rear-control-arms-for-mini-gen-1-r50-r52-r53-2001-2008","title":"Camber Adjustable Rear Control Arms for Mini Gen 1 (R50\/R52\/R53) 2001-2008","description":"\u003cp\u003eThe New Mini (Gen 1) R50, R52 and R53 are hugely popular on the car Tuning and Styling scene. They are a brilliant little car, look great from the factory and you can pick them up for a fraction of the cost of when they were new. They offer great looks; amazing handling and the Cooper and Cooper S models offer fantastic performance.\u003c\/p\u003e\n\u003cp\u003eWe sell hundreds of our Stance+ Street Coilover Kits for these cars every year. Most owners drop the Mini around 40mm, but some customers prefer a much lower stance dropping the car 60-80mm. This extreme drop does result in the multi-link rear suspension suffering from increased negative camber.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms replace the fixed length factory items with a fully adjustable design. The adjustable length means you can set the rear camber to your preferred set up. Most people re-set the geometry to factory settings; some prefer a mild negative camber setting for increased grip for fast road and occasional track day use.\u003c\/p\u003e\n\u003cp\u003eOur Camber control arms fit the New Mini R50 Hatchback, R52 Cabriolet and R53 Cooper S Supercharged Hatchback, Petrol or Diesel engine, the fitment is identical.\u003c\/p\u003e\n\u003cp\u003eThe powder-coated finish handles winter salt without complaint. A simple twenty-minute fit per side, no fabrication required, no special tools needed.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Mini New Mini. (R50 (Gen 1)\/R52 (Gen 1)\/R53 (Gen 1)). (2001-2008). Engines: 1.4 One, 1.6 One, 1.6 Cooper, 1.6 Cooper S, 1.4 One D, 1.6 One D. Hatchback \/ Cabriolet. 2WD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320478589266,"sku":"SPCCA003","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA003-Box.jpg?v=1792764284"},{"product_id":"camber-adjustable-rear-control-arms-for-mini-electric-f65-f66-2023-present","title":"Camber Adjustable Rear Control Arms for Mini Electric (F65\/F66) 2023-Present","description":"\u003cp\u003eThe New Mini F65 5-door Hatchback and F66 3-door Hatchback electric Cooper Es are the newest Minis on the road, and some enthusiasts are already looking at tuning and lowering them. They look brilliant with a modest drop, and the instant torque from the electric motor suits the chassis well.\u003c\/p\u003e\n\u003cp\u003eThe rear suspension is multilink and, predictably, has the same lowered-camber problem as the previous generation suffers from. The lower you drop the car the more negative camber the rear suspension suffers from.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThese adjustable rear control arms are the answer to solving the excessive rear tyre wear caused by incorrect camber settings. Bolt them in, get the car laser aligned and your good to go. The camber arms are adjustable in length so the rear suspension geometry can easily be rectified.\u003c\/p\u003e\n\u003cp\u003eThe New Mini F65\/F66 Cooper E and Cooper SE use the same rear multilink suspension. Whether you have the 3-door F66 and 5-door F65, the fitment is identical.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber bushes hold the suspension geometry tight and reduce movement. A sensible upgrade for any properly modified electric Mini build suffering from rear camber issues.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Mini New Mini. (F65\/F66). (2023-Present). Engines: Electric Cooper E, Electric Cooper SE, Electric Coope SE. 5 Door Hatchback \/ 3 Door Hatchback. 2WD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53320479572306,"sku":"SPCCA005","price":179.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA005-Box.jpg?v=1792764469"},{"product_id":"camber-adjustable-rear-control-arms-for-seat-leon-1m-4-motion-1999-2005","title":"Camber Adjustable Rear Control Arms for Seat Leon (1M) 4 Motion 1999-2005","description":"\u003cp\u003eThe Seat Leon (1M) 4 Motion is a bit of a cult car, and for good reason. Available with the 1.8T, 1.9TDi and 2.8 V6 engines the car is a force to be reckoned with.\u003c\/p\u003e\n\u003cp\u003eA clever VAG Haldex 4 Motion powertrain sending power to all four wheels, and a chassis that absolutely loves a lowered ride height. The trouble is the independent rear suspension was set up for a stock car, once you start lowering it the rear wishbone suspension delivers a huge amount of negative camber.\u003c\/p\u003e\n\u003cp\u003eThe symptoms of excessive negative camber are always the same: scrubbed inside tyre wear and reduced rear end grip, and a car that feels nervous mid-corner instead of planted. Bolt these Stance+ Adjustable Rear Camber Arms into place and get a professional laser alignment carried out afterwards, and the Seat Leon (1M) 4 Motion will drive way better than Seat ever intended.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Adjustable Rear Tie Bars neutralise the negative camber and put the rear tyres back where they should be, flat on the tarmac.\u003c\/p\u003e\n\u003cp\u003eWhether you are running the 1.8T Cupra, the 1.9 TDi or the rare 2.8 V6, the fix is the same: Bolt the Stance+ Rear Camber Arms into place, adjust to suit and get the car professionally laser aligned. We recommend you fit these adjustable tie bars at the top of the rear axle; however, they can be fitted at the bottom if preferred.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Camber Control Arms also tighten up the rear end nicely. The heavy-duty rubber bushes flex less than the worn factory items, so the back of the car feels more composed when driven hard, which is exactly what you want from a 4 Motion Seat Leon.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Seat Leon. (1M). (1999-2005). Engines: 1.8T, 1.9TDi, 2.8 V6. Hatchback. 4 Motion.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324447187282,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-skoda-octavia-1u-4-motion-1996-2004","title":"Camber Adjustable Rear Control Arms for Skoda Octavia (1U) 4 Motion 1996-2004","description":"\u003cp\u003eThe Skoda Octavia (1U) 4 Motion sits on the same VW Golf MK4 platform as the rest of the VAG four-wheel-drive family from this era, which means it suffers from the same rear camber problems the moment you start lowering it.\u003c\/p\u003e\n\u003cp\u003eThe problems arise when you lower more than 30mm. The rear tyres start to tilt inwards at the top. This increased negative camber reduces the tyre contact patch on the road. The rear suspension runs a wishbone system, the lower you go the more negative camber is generated.\u003c\/p\u003e\n\u003cp\u003eThis problem happens when lowering both the Saloon and Estate models. The excessive camber increases tyre wear, and the reduced tyre contact patch reduces grip.\u003c\/p\u003e\n\u003cp\u003eNegative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. The only way to sort this excessive camber issue is to fit some adjustable length rear camber control arms so the excessive camber can be neutralised.\u003c\/p\u003e\n\u003cp\u003eA pair of these Stance+ Camber Adjustable Control Arms gives your alignment shop the means to set the camber properly and professionally, they are adjustable in length so any negative camber can be easily neutralised, so the rear tyres sit flat on the road and wear evenly.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber bushes with steel inserts hold the geometry firmly in place, and the powder-coated finish helps prevent corrosion. Direct bolt-on fit, no fabrication or modification necessary. Once fitted we recommend getting the wheel alignment checked and professionally set up.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Skoda Octavia. (1U). (1996-2004). Engines: 1.8, 1.8T, 2.0, 2.3 V5, 2.8 V6, 1.9TDi. Saloon \/ Estate. 4 Motion.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324447220050,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-vw-bora-1j-4-motion-1996-2005","title":"Camber Adjustable Rear Control Arms for VW Bora (1J) 4 Motion 1996-2005","description":"\u003cp\u003eThe VW Bora (1J) 4 Motion is the Saloon\/Estate version of the VW Golf MK4 (1J) R32, they both run the Haldex 4WD system and suffer from the same excessive camber when lowered. The rear suspension runs an independent wishbone system, the lower you go, the more the top of the tyre tilts in and the more negative camber you get.\u003c\/p\u003e\n\u003cp\u003eThe excessive negative camber issues arise when you lower the car more than 30-35mm. The rear tyres start to tilt inwards at the top. This increase in negative camber reduces the tyre contact patch on the tarmac. The lower you drop the car the more negative camber is generated.\u003c\/p\u003e\n\u003cp\u003eThis problem happens when lowering both the Bora 4 Motion and Golf MK4 R32 more than 30-35mm. The excessive camber increases tyre wear, and the reduced tyre contact patch reduces grip.\u003c\/p\u003e\n\u003cp\u003eNegative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. The only way to sort this excessive camber issue is to fit some Stance+ adjustable length rear camber control arms so the excessive camber can be neutralised.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms solve that problem for good. They replace the fixed length factory items with a fully adjustable design, allowing excessive camber to be neutralised. Book the car in for a professional wheel alignment and problem solved.\u003c\/p\u003e\n\u003cp\u003eThis kit fits all cars built on the VAG 4 Motion platform. The uprated rubber bushes also benefit the control arms reducing unnecessary movement under load and keeping the car planted when driven hard.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: VW Bora. (1J). (1996-2005). Engines: 1.8T, 2.3 V5, 2.8 V6, 1.9TDi. Saloon \/ Estate. 4 Motion.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324447252818,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-vw-golf-mk4-1j-4-motion-1996-2004","title":"Camber Adjustable Rear Control Arms for VW Golf Mk4 (1J) 4 Motion 1996-2004","description":"\u003cp\u003eThe VW Golf Mk4 (1J) 4 Motion is one of the most popular performance VW chassis to be modified and lowered. The 4 Motion range includes the 2.3V5, 2.8V6, 1.9TDi and the very popular 3.2V6 R32 model. The Haldex 4WD system on all these cars runs an independent rear suspension system, great for handling and grip however when the chassis is lowered the rear wheels suffer from increased negative camber. For this very reason we developed our very popular Stance+ Camber Adjustable Rear Control Arms.\u003c\/p\u003e\n\u003cp\u003eThe negative camber issues on the 4 Motion VAG platform arise when you lower the chassis more than 30-35mm. The rear tyres start to tilt inwards at the top. This increased negative camber reduces the tyre contact patch on the road.\u003c\/p\u003e\n\u003cp\u003eThe rear suspension runs an independent wishbone system, which means the lower you go the more negative camber is generated. The excessive camber increases tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. The only way to sort this excessive camber issue is to fit some of our Stance+ Camber Adjustable Rear Control Arms so the excessive camber can be neutralised.\u003c\/p\u003e\n\u003cp\u003eThis is a fit and forget item. The adjustable camber arms replace the top tie bars on the VAG (VW Audi Group) 4 Motion platform; however they can replace the bottom tie bars if needed.\u003c\/p\u003e\n\u003cp\u003eThese adjustable camber arms are a very easy fit for most home mechanics or professionals alike. Once fitted it is essential to get the car aligned properly on a Hunter laser alignment machine dialling out the negative camber and returning the geometry back to factory settings. The adjustable tie bars are length adjustable so you can dial in as much negative or positive camber you need.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber suspension bushes reduce chassis flex, so the rear of the car feels tighter under load. A genuine fit-and-forget upgrade for any lowered VW Golf MK4 (1J) 4 Motion build.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: VW Golf Mk 4. (1J). (1996-2004). Engines: 2.3 V5, 2.8 V6, 1.9TDi, R32 3.2 V6. Hatchback \/ Estate. 4 Motion.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324447285586,"sku":"SPCCA001","price":179.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA001-Box.jpg?v=1792763546"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-1-series-e81-e82-e87-e88-2004-2011","title":"Camber Adjustable Rear Control Arms for BMW 1 Series (E81\/E82\/E87\/E88) 2004-2011","description":"\u003cp\u003eThe BMW 1 Series (E81\/E82\/E87\/E88) is one of the great affordable rear-wheel-drive tuning platforms BMW produce. They are a very popular car to be tuned, modified and more importantly lowered. We sell hundreds of coilover kits for these cars every year, a simple 30-40mm lowering gives a huge improvement in looks and handling over stock, the car looks, drives and handles so much better. Some customers however prefer to drop their cars much lower; this increases negative camber on the rear suspension which can affect handling and performance.\u003c\/p\u003e\n\u003cp\u003eThe BMW 1 Series (E81\/E82\/E87\/E88) are fitted with multilink rear suspension. On a multilink\/independent style rear wishbone suspension the lower you go the more negative camber is generated.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. The only way to sort this excessive camber issue is to fit some of our Stance+ Camber Adjustable Rear Control Arms so the excessive camber can be neutralised.\u003c\/p\u003e\n\u003cp\u003eA little bit of negative camber looks great but excessive negative camber can cause serious handling issues. Our Stance+ Adjustable Rear Camber Control arms help neutralise the excessive camber and allow the rear suspension geometry to be set back to a more sensible factory setting.\u003c\/p\u003e\n\u003cp\u003eOur Stance+ Camber Adjustable Rear Control Arms fit all four body styles: The BMW E81 Hatchback, BMW E82 Coupe, 5-door BMW E87 Hatchback and the BMW E88 Convertible. Our camber control arms fit all makes, models and engine sizes excluding the X-Drive and 1M models.\u003c\/p\u003e\n\u003cp\u003eUprated heavy duty rubber bushes also sharpen up rear-end feel, which is exactly what you want from a fast BMW 1 Series (E81\/E82\/E87\/E88). Once the camber arms have been fitted the car will need a full professional wheel alignment. We recommend the Hunter brand which most well-equipped garage and workshops use.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW 1 Series. (E81\/E82\/E87\/E88). (2004-2011). Engines: 116i, 118i, 120i, 125i, 128i, 130i, 135i, 116D, 118D, 120D, 123D. 3 Door Hatchback \/ Coupe \/ 5 Door Hatchback \/ Convertible. RWD. Excluding X-Drive models and excluding 1M.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324447973714,"sku":"SPCCA004","price":119.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA004-Box.jpg?v=1792764381"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-3-series-e46-inc-m3-and-csl-1998-2006","title":"Camber Adjustable Rear Control Arms for BMW 3 Series (E46) inc. M3 \u0026 CSL 1998-2006","description":"\u003cp\u003eThe BMW E46 is one of the most modified and most lowered cars in Britain. The Saloon, Touring, Coupe and Cabriolet all look aggressive when lowered. We sell hundreds of our Stance+ Coilover kits for the BMW E46 every year, it is one of our best-selling kits. Most people lower the cars around 40-45mm, however some go lower and with that comes increased negative camber, especially on the rear of the car.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThe arms are adjustable in length so you can set anything between 3.5 degrees negative or 1-degree positive camber. These adjustable camber arms will fit all makes and models of the BMW E46 including; Touring, Saloon, Coupe and Cabriolet. They will fit all engine sizes including the popular M3 and rare M3 CSL models.\u003c\/p\u003e\n\u003cp\u003eThese adjustable rear control arms are practically a default fitment on any properly sorted and lowered E46 build, and for the M3 and CSL owners they are pretty much mandatory.\u003c\/p\u003e\n\u003cp\u003eThey also tighten up the rear axle response, which suits the BMW E46 character perfectly. Particularly worth doing if you are running staggered size wheels and tyres.\u003c\/p\u003e\n\u003cp\u003eUprated heavy duty rubber bushes also sharpen up rear-end feel, which is exactly what you want from a fast BMW 3 Series E46. Once the camber arms have been fitted the car will need a full professional wheel alignment. We recommend the Hunter brand which most well-equipped garage and workshops use.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW 3 Series. (E46). (1998-2006). Engines: 318Ci, 320Ci, 323Ci, 325Ci, 328Ci, 330Ci, 320Cd, 330Cd, 316Ti, 318Ti, 320Ti, 323Ti, 325Ti, 318TD, 320TD, 316i, 318i, 320i, 323i, 325i, 328i, 330i, 318D, 320D, 330D, 3.2 M3. Cabriolet \/ Compact \/ Saloon \/ Touring \/ Coupe (Inc CSL). RWD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448006482,"sku":"SPCCA002","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA002-Box2.jpg?v=1792763853"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-x1-f48-2015-2022","title":"Camber Adjustable Rear Control Arms for BMW X1 (F48) 2015-2022","description":"\u003cp\u003eA lowered BMW X1 (F48) is an unusual choice of car to be modified but it works brilliantly when done right. The BMW X1 in M Sport spec already looks menacing, and a modest drop transforms it into something genuinely more aggressive. The rear suspension however suffers from increased levels of negative camber when lowered.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection.\u003c\/p\u003e\n\u003cp\u003eOur Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber. The arms are adjustable in length so you can set anything between 3 degrees negative or 3 degrees positive camber.\u003c\/p\u003e\n\u003cp\u003eThese camber adjustable rear control arms replace the fixed length factory items and can be adjusted to re-set the rear suspension geometry back to factory specification. Once fitted the SUV will need a full 4-wheel alignment to make sure the camber angles match on both sides of the vehicle.\u003c\/p\u003e\n\u003cp\u003eBoth 2WD and 4WD variants are covered, including the BMW X1 25e plug-in hybrid. Uprated heavy duty rubber bushes sharpen up rear-end feel, which is exactly what you want from a properly sorted BMW X1.\u003c\/p\u003e\n\u003cp\u003eThe powder-coated finish handles British winters without complaint. A simple twenty-minute fit per side, no fabrication required.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW X1. (F48). (2015-2022). Engines: 1.5T, 2.0T, 1.5T Hybrid, 1.5D, 2.0D. SUV. 2WD \u0026amp; 4WD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448039250,"sku":"SPCCA005","price":179.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA005-Box.jpg?v=1792764469"},{"product_id":"camber-adjustable-rear-control-arms-for-bmw-x3-e83-2004-2010","title":"Camber Adjustable Rear Control Arms for BMW X3 (E83) 2004-2010","description":"\u003cp\u003eThe BMW X3 (E83) looks great when lowered. The SUV usually copes with a small 10-15mm lowering without changing the camber angles too much, however lower the car more than this and the rear can suffer from extreme negative camber causing handling and tyre wear issues.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip.\u003c\/p\u003e\n\u003cp\u003eNegative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms are length adjustable, so any negative camber caused by lowering can easily be rectified.\u003c\/p\u003e\n\u003cp\u003eThey replace the fixed length factory items with fully adjustable arms, giving you the room to dial in correct rear camber settings for whatever ride height you are running.\u003c\/p\u003e\n\u003cp\u003ePetrol or Diesel, RWD or X-Drive, the fitment is the same. Heavy duty rubber suspension bushes hold the geometry tight even with the weight an X3 carries, and the powder-coated finish stands up to British winters. A solid choice for anyone running a lowered BMW X3 E83 build.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: BMW X3. (E83). (2004-2010). Engines: 2.0, 2.5, 3.0, 2.0D, 3.0D. SUV. RWD \u0026amp; X-Drive.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448072018,"sku":"SPCCA002","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA002-Box2.jpg?v=1792763853"},{"product_id":"camber-adjustable-rear-control-arms-for-mini-gen-2-r55-r56-r57-r58-r59-2006-2015","title":"Camber Adjustable Rear Control Arms for Mini Gen 2 (R55\/R56\/R57\/R58\/R59) 2006-2015","description":"\u003cp\u003eThe New Mini (Gen 2) R55, R56, R57, R58 and R59 Minis are everywhere in the UK tuning scene. Cooper S, JCW, Cooper SD, all of them respond brilliantly to being lowered. We sell hundreds of our Stance+ Street Coilover Kits for these cars every year.\u003c\/p\u003e\n\u003cp\u003eThere is a massive aftermarket Tuning and Styling scene built around getting these cars sat low and handling properly. The lower you drop the Mini the more negative camber is generated. This isn't helped by the multi-link rear suspension, as the car get lower the more negative camber is generated.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms replace the fixed length factory items with a fully adjustable design.\u003c\/p\u003e\n\u003cp\u003eThe adjustable length means you can set the rear camber to your preferred set up. Most people re-set the geometry to factory settings; some prefer a mild negative camber setting for increased grip for fast road and occasional track day use.\u003c\/p\u003e\n\u003cp\u003eOur camber adjustable rear control arms fit the New Mini (Gen 2) R55 Clubman, R56 Hatchback, R57 Cabriolet, R58 Coupe and R59 Roadster, Petrol or diesel, the fitment is the same.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber suspension bushes sharpen up rear-end response nicely on what are already great handling little cars. Particularly worth fitting on JCW builds where the extra power and stiffer suspension make rear-axle geometry compromises more critical.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Mini New Mini. (R55 (Gen 2)\/R56 (Gen 2)\/R57 (Gen 2)\/R58 (Gen 2)\/R59 (Gen 2)). (2006-2015). Engines: 1.2 One, 1.4 One, 1.6 One, 1.6 Cooper, 1.6 Cooper S, 1.6 Cooper D, 2.0 Cooper D, 2.0 Cooper SD, 1.6JCW. Clubman \/ Hatchback \/ Cabriolet \/ Coupe \/ Roadster. 2WD. Will fit all engine sizes including specialist Cooper S and JCW models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448235858,"sku":"SPCCA003","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA003-Box.jpg?v=1792764284"},{"product_id":"camber-adjustable-rear-control-arms-for-mini-countryman-paceman-r60-r61-2010-2017","title":"Camber Adjustable Rear Control Arms for Mini Countryman \/ Paceman (R60\/R61) 2010-2017","description":"\u003cp\u003eThe New Mini R60 Countryman and New Mini R61 Paceman are rare choice for a Tuning project, but the JCW versions in particular look sensational when lowered. Compact crossover proportions, plenty of grunt under the bonnet, and a chassis that responds well to lowering. When lowering the R60 and R61 the rear suffers from increased levels of negative camber.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThese camber adjustable rear control arms replace the factory fixed length items and give you the ability to neutralise any excessive negative camber.\u003c\/p\u003e\n\u003cp\u003eThe camber arms are adjustable in length so any camber setting can be chosen, dial in a few degrees of negative camber for track use or reset the geometry back to factory settings for road use. The choice is yours.\u003c\/p\u003e\n\u003cp\u003eThe New Mini (R60\/R61) Countryman, Paceman, Petrol and Diesel use the same kit, the fitment on these rear camber arms is the same on all models.\u003c\/p\u003e\n\u003cp\u003eHeavy duty rubber suspension bushes are used in all our camber control arm kits. The powder-coated finish protect against harsh British winters. A simple twenty-minute fit per side, no fabrication required.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Mini New Mini. (R60 (Gen 2)\/R61 (Gen 2)). (2010-2017). Engines: 1.6 One, 1.6 Cooper, 1.6 Cooper S, 1.6 JCW, 1.6 One D, 1.6 Cooper D, 2.0 Cooper D, 2.0 Cooper SD. Countryman \/ Paceman. 2WD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448268626,"sku":"SPCCA003","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA003-Box.jpg?v=1792764284"},{"product_id":"camber-adjustable-rear-control-arms-for-mini-f54-f55-f56-f57-2013-2024","title":"Camber Adjustable Rear Control Arms for Mini (F54\/F55\/F56\/F57) 2013-2024","description":"\u003cp\u003eThe New Mini F-Series is the current generation of the modern Mini scene. There are numerous models in the lineup including the New Mini F54 Clubman, F55 5-door Hatchback, F56 3-Door Hatchback and F57 cabriolet.\u003c\/p\u003e\n\u003cp\u003eAll of them benefit from being lowered. When lowering the F-Series the rear suffers from increased levels of negative camber.\u003c\/p\u003e\n\u003cp\u003eThe excessive camber increases rear tyre wear, and the reduced tyre contact patch reduces grip. Negative camber wears the inside edge of tyres aggressively, something you don't normally see without close inspection. Our Stance+ Camber Adjustable Rear Control Arms are designed to help dial out excessive rear camber.\u003c\/p\u003e\n\u003cp\u003eThese camber adjustable rear control arms are an easy fit to sort excessive negative camber. They replace the fixed length factory items with fully adjustable arms, giving you the ability to set up the rear camber correctly.\u003c\/p\u003e\n\u003cp\u003eThis one kit fits all the New Mini F-series body styles (F54\/F55\/F56\/F57). Fits all engine sizes including Petrol and Diesel including JCW and GP models. Uprated heavy duty rubber bushes also tighten up the rear-end feel, which is no bad thing on a JCW or GP model.\u003c\/p\u003e\n\u003cp\u003eParticularly worth fitting if you are running a particularly low coilover suspension setup. Our kits are easy to fit. Direct bolt-on, fitting takes around twenty minutes per side.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Camber Adjustable Rear Control Arms \/ Stance+ Camber Adjustable Rear Tie Bars are suitable for: Mini New Mini. (F54\/F55\/F56\/F57). (2013-2024). Engines: 1.5T One, 1.5T Cooper, 2.0T Cooper JCW, 1.5D One D, 2.0D One D, 1.2 One First, 1.5 One First, 1.2 One, 1.5 One, 1.5 Cooper, 2.0 Cooper S, 1.2D One First D, 1.5D One First D, 1.2D One D, 1.5D Cooper D, 2.0D Cooper SD. Clubman \/ 5 Door Hatchback \/ 3 Door Hatchback \/ Cabriolet. 2WD.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53324448334162,"sku":"SPCCA005","price":179.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPCCA005-Box.jpg?v=1792764469"}],"url":"https:\/\/stanceplus.com\/collections\/camber-correction.oembed?page=2","provider":"STANCE+","version":"1.0","type":"link"}