{"title":"Audi","description":"","products":[{"product_id":"street-coilover-kit-audi-a3-8l-1996-2002","title":"Street Coilover kit for Audi A3 (8L) 1996-2002","description":"\u003cp\u003eYour Audi A3 (8L) Hatchback 2WD was built for more than factory ride height. The Stance+ Street Coilover Kit is a fully adjustable suspension upgrade that lets you set the perfect drop for your driving style, whether that's a clean daily setup or full-on low life.\u003c\/p\u003e\n\u003cp\u003eThe dampers are filled with FUCH oil for consistent performance and are set approximately 25–30% firmer than the factory shocks. That translates to noticeably less body roll, crisper turn-in, and a much more planted feel at speed. The springs are shot-peened chrome silicon steel with a black powder coat finish. Tough enough for British roads and good enough for weekend track sessions.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Street is our entry-level coilover kit, but don't let that fool you. It's a serious upgrade over factory suspension. Thousands of drivers across the UK run these kits daily, and the 2-year unlimited mileage warranty means you can fit with confidence. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your existing factory top mounts and bearings. We'd suggest replacing them with new ones for the best results. Fitting should be carried out by a qualified technician, with tracking and alignment reset once installed. Stance+ Street Coilovers are backed by a 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1996-2002) Hatchback. 2WD. Fitted with the following engines: 1.6, 1.8, 1.8T, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459758158162,"sku":"SPC001","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC001_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a3-8l-s3-quattro-1996-2003","title":"Street Coilover kit for Audi A3 (8L) S3 Quattro 1996-2003","description":"\u003cp\u003eTransform your Audi A3 (8L) Hatchback 1.8T, 1.8T S3 Quattro from stock to stunning with the Stance+ Street Coilover Kit. This complete suspension replacement drops your ride height, sharpens your handling, and gives your Audi the stance it deserves.\u003c\/p\u003e\n\u003cp\u003eThe dampers are filled with FUCH oil for consistent performance and are set approximately 25–30% firmer than the factory shocks. That translates to noticeably less body roll, crisper turn-in, and a much more planted feel at speed. The springs are shot-peened chrome silicon steel with a black powder coat finish. Tough enough for British roads and good enough for weekend track sessions.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for enthusiasts who use their cars every day. The ride is firmer and more controlled than stock, but it's not harsh. It's that satisfying sweet spot where the car feels sportier and more capable without punishing you on rough surfaces. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly, reusing your original top mounts and bearings. We always advise professional fitting and a full laser alignment afterwards. Covered by the Stance+ 2-year warranty for total peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1996-2003) Hatchback. Quattro. Fitted with the following engines: 1.8T, 1.8T S3.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459761074514,"sku":"SPC013","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC013_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a3-8l-quattro-1999-2003","title":"Street Coilover kit for Audi A3 (8L) Quattro 1999-2003","description":"\u003cp\u003eIf you're running an Audi A3 (8L) Hatchback 1.9TDi Quattro and want it sitting right, the Stance+ Street Coilover Kit is where it starts. Height-adjustable by the millimetre, UK-designed and engineered, and ready to handle daily driving as well as the occasional show or track outing.\u003c\/p\u003e\n\u003cp\u003eThe FUCH oil-filled dampers provide consistent, reliable damping whether you're on a fast A-road or crawling through traffic. Spring and damper rates are set around 25–30% above stock, which gives the car a noticeably sportier character without the harshness that plagues cheaper kits. Short, hardened chrome piston rods and built-in elastomer bump stops ensure durability and a controlled ride across a wide range of conditions.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for enthusiasts who use their cars every day. The ride is firmer and more controlled than stock, but it's not harsh. It's that satisfying sweet spot where the car feels sportier and more capable without punishing you on rough surfaces. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1999-2003) Hatchback. Quattro. Fitted with the following engines: 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459761140050,"sku":"SPC013","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC013_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a3-8pa-s3-quattro-2006-2012","title":"Street Coilover kit for Audi A3 (8PA) S3 Quattro 2006-2012","description":"\u003cp\u003eThe Stance+ Street Coilover Kit for the Audi A3 (8PA) Sportback 2.0TFSi S3 Quattro replaces your entire factory suspension in one go. Adjustable ride height, uprated damping, steel construction with a powder-coated finish. Everything you need to drop your car and improve how it drives.\u003c\/p\u003e\n\u003cp\u003eOn the road, the difference is immediate. The oil-filled dampers are tuned approximately 25–30% stiffer than the factory shocks, cutting body roll and giving you noticeably flatter cornering. Your Audi will change direction with more confidence, feel more planted through sweeping bends, and respond more precisely to steering inputs. It's firmer than stock, but still comfortable enough for the daily commute.\u003c\/p\u003e\n\u003cp\u003eWhether you're after improved handling for spirited road driving or just want your car sitting properly, the Stance+ Street kit delivers on both fronts. Comfortable enough for the daily commute, sharp enough to put a smile on your face when the road opens up. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8PA) (2006-2012) Sportback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459763335506,"sku":"SPC051","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC051_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a3-8p1-s3-quattro-2006-2012","title":"Street Coilover kit for Audi A3 (8P1) S3 Quattro 2006-2012","description":"\u003cp\u003eGet your Audi A3 (8P1) Hatchback 2.0TFSi S3 sitting exactly where you want it. The Stance+ Street Coilover Kit is a complete, height-adjustable suspension replacement, designed and engineered here in the UK, backed by a 2-year warranty, and trusted by thousands of Audi S3 owners across the country.\u003c\/p\u003e\n\u003cp\u003eWhat you'll notice first is how much flatter the car corners. The 25–30% uprated damping eliminates the lazy body roll of the factory setup, and the high-tensile powder-coated springs keep the car composed over uneven surfaces. It's the kind of upgrade that makes you wonder why you didn't do it sooner. Tighter, more responsive, and genuinely more enjoyable to drive.\u003c\/p\u003e\n\u003cp\u003eSuitable for road use and the occasional track day, the Stance+ Street Coilover Kit strikes the right balance between improved handling and everyday comfort. It's a genuine upgrade over the factory setup in every measurable way. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eEverything you need is in the box, bar the factory top mounts and bearings which we recommend replacing with new items during installation. Have it fitted by a professional, get the geometry set up properly, and enjoy the results. All Stance+ Street Coilover Kits come with a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8P1) (2006-2012) Hatchback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459763368274,"sku":"SPC051","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC051_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a2-8z-1999-2005","title":"Street Coilover kit for Audi A2 (8Z) 1999-2005","description":"\u003cp\u003eWhether you're commuting through town or rolling into a weekend meet, the Stance+ Street Coilover Kit makes your Audi A2 (8Z) Hatchback look and feel the part. Fully height-adjustable with uprated damping for a sportier ride without the bone-shaking stiffness of budget kits.\u003c\/p\u003e\n\u003cp\u003eStance+ Street dampers are oil-filled and uprated by around 25–30% over factory spec. That means less wallow, less body roll, and a noticeably more composed ride through B-roads and motorway sweepers alike. The chrome silicon springs are powder-coated black and built to last, while helper springs prevent dislocation when the car's jacked up for maintenance or wheel changes.\u003c\/p\u003e\n\u003cp\u003eThere's something about a properly lowered Audi A2 (8Z) that just works. The Stance+ Street Coilover Kit drops the ride height, firms up the handling, and gives your car a purposeful look that stands out from every other stock example on the road. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eFitting is a straightforward swap with your factory suspension. Reuse your OE top mounts and bearings (though we'd always recommend fitting fresh ones). Get it fitted by a qualified mechanic, have the tracking and alignment reset on a proper Hunter laser alignment machine, and you're good to go. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A2 (8Z) (1999-2005) Hatchback. 2WD. Fitted with the following engines: 1.4, 1.6FSi, 1.2TDi, 1.4TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459763401042,"sku":"SPC072","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC072_BOX.jpg?v=1787119330"},{"product_id":"street-coilover-kit-audi-a1-8x-2010-2018","title":"Street Coilover kit for Audi A1 (8X) 2010-2018","description":"\u003cp\u003eLower it. Stiffen it. Make it handle. The Stance+ Street Coilover Kit for the Audi A1 (8X) Hatchback does all three. A complete bolt-on suspension upgrade that replaces your tired factory setup with something far more capable.\u003c\/p\u003e\n\u003cp\u003eThe uprated dampers, approximately 25–30% stiffer than OE, deliver a tangible improvement in body control. Expect less lean through corners, sharper turn-in, and a more connected feel from behind the wheel. The springs are high-tensile chrome silicon steel, shot-peened for strength and powder-coated for protection against the British weather. Firm enough to feel the difference, compliant enough to live with every day.\u003c\/p\u003e\n\u003cp\u003eSmaller cars look fantastic with a proper drop, and the Audi A1 (8X) is no exception. The Stance+ Street kit fills those wheel arches, tightens the handling, and gives your Hatchback the kind of road presence that factory suspension simply can't deliver. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A1 (8X) (2010-2018) Hatchback. 2WD. Fitted with the following engines: 1.0TFSi, 1.2TFSi, 1.4TFSi, 1.4TSi, 1.8TFSi, 1.4TDi, 1.6TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52459763794258,"sku":"SPC093","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC093_BOX.jpg?v=1787119330"},{"product_id":"street-coilover-kit-audi-a1-gb-2018","title":"Street Coilover kit for Audi A1 (GB) 2018-","description":"\u003cp\u003eThe Audi A1 (GB) Hatchback is a great looking car straight from the factory. However, the car rides a little high from the factory and benefits greatly from being lowered. The Stance+ Street Coilover Kit lets you unlock that potential with a fully height-adjustable suspension kit, designed and engineered in the UK exclusively for Stance+.\u003c\/p\u003e\n\u003cp\u003eThe uprated dampers, approximately 25–30% stiffer than OE, deliver a tangible improvement in body control. Expect less lean through corners, sharper turn-in, and a more connected feel from behind the wheel. The springs are high-tensile chrome silicon steel, shot-peened for strength and powder-coated for protection against the British weather. Firm enough to feel the difference, compliant enough to live with every day.\u003c\/p\u003e\n\u003cp\u003eThe Audi A1 (GB) Hatchback is one of those cars that looks great when it's been dropped on some aftermarket wheels. The proportions just work. The Stance+ Street kit gives you the adjustability to find that sweet spot where the car looks right and still handles brilliantly on tight city streets and winding back roads. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your existing factory top mounts and bearings. We'd suggest replacing them with new ones for the best results. Fitting should be carried out by a qualified technician, with tracking and alignment reset once installed. Stance+ Street Coilovers are backed by a 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A1 (GB) (2018-) Hatchback. 2WD. Fitted with the following engines: 1.0TFSi, 1.5TFSi, 2.0TFSI.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587295342930,"sku":"SPC038","price":279.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC038_Box.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a3-8p7-2008-2010","title":"Street Coilover kit for Audi A3 (8P7) 2008-2010","description":"\u003cp\u003eDrop your Audi A3 (8P7) Cabriolet to the perfect height with the Stance+ Street Coilover Kit. A complete suspension upgrade that replaces your factory setup and transforms the way your Audi looks and handles.\u003c\/p\u003e\n\u003cp\u003eUnderneath, the kit uses FUCH oil-filled dampers matched to powder-coated chrome silicon springs, both uprated by around 25–30% for a sportier, more controlled feel. Hardened chrome piston rods and elastomer bump stops are built in for long-term durability, and helper springs are included where needed to prevent spring dislocation when the car is on a jack or ramp.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for enthusiasts who use their cars every day. The ride is firmer and more controlled than stock, but it's not harsh. It's that satisfying sweet spot where the car feels sportier and more capable without punishing you on rough surfaces. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly, reusing your original top mounts and bearings. We always advise professional fitting and a full laser alignment afterwards. Covered by the Stance+ 2-year warranty for total peace of mind.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8P7) (2008-2010) Cabriolet. 2WD. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587295670610,"sku":"SPC051","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC051_BOX_0cec9517-054d-4b5e-951d-4c2eeadaf090.jpg?v=1787119330"},{"product_id":"street-coilover-kit-audi-a3-8pa-2004-2012","title":"Street Coilover kit for Audi A3 (8PA) 2004-2012","description":"\u003cp\u003eThe Stance+ Street Coilover Kit for the Audi A3 (8PA) Sportback 2WD and Quattro replaces your entire factory suspension in one go. Adjustable ride height, uprated damping, steel construction with a powder-coated finish. Everything you need to drop your car and improve how it drives.\u003c\/p\u003e\n\u003cp\u003eWith damping rates set approximately 25–30% above standard, these oil-filled shock absorbers keep your Audi A3 (8PA) Sportback 2WD and Quattro composed where the factory setup starts to feel soft and vague. Corner entry is more predictable, body roll is significantly reduced, and the whole car feels like it's working with you rather than against you. The ride is firm but forgiving. Stiff enough to feel sporty, smooth enough for everyday use.\u003c\/p\u003e\n\u003cp\u003eBuilt for the road with the occasional track day in mind, this kit sits in that sweet spot between performance and practicality. Your car will look better, handle better, and feel more rewarding to drive, all without sacrificing the comfort you need for everyday use. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8PA) (2004-2012) Sportback. 2WD and Quattro. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 3.2FSi V6, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587295736146,"sku":"SPC051","price":289.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC051_BOX_0cec9517-054d-4b5e-951d-4c2eeadaf090.jpg?v=1787119330"},{"product_id":"street-coilover-kit-audi-a3-8v-solid-beam-2012-2020","title":"Street Coilover kit for Audi A3 (8V) Solid Beam 2012-2020","description":"\u003cp\u003eGet your Audi A3 (8V) Hatchback, Sportback, Cabriolet and Saloon sitting exactly where you want them. The Stance+ Street Coilover Kit is a complete, height-adjustable suspension replacement, designed and engineered here in the UK, backed by a 2-year warranty, and trusted by thousands of Audi owners across the country.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the solid beam (torsion beam) rear axle variant. It's essential to check which rear suspension type your car has before ordering. Fitting the wrong kit can cause problems. If you're unsure, drop us a message and we'll help you confirm.\u003c\/p\u003e\n\u003cp\u003eOn the road, the difference is immediate. The oil-filled dampers are tuned approximately 25–30% stiffer than the factory shocks, cutting body roll and giving you noticeably flatter cornering. Your Audi will change direction with more confidence, feel more planted through sweeping bends, and respond more precisely to steering inputs. It's firmer than stock, but still comfortable enough for the daily commute.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Street is our entry-level coilover kit, but don't let that fool you. It's a serious upgrade over factory suspension. Thousands of drivers across the UK run these kits daily. Suitable for both the 2WD and Quattro. We sell hundreds of these kits every year, a very popular car to be lowered. Everything you need is in the box, bar the factory top mounts and bearings which we recommend replacing with new items during installation. Have it fitted by a professional, get the geometry set up properly, and enjoy the results. All Stance+ Street Coilover Kits come with a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8V) (2012-2020) Hatchback, Sportback, Cabriolet and Saloon. 2WD and Quattro. Solid beam rear suspension. Fitted with the following engines: 1.0TFSi, 1.2TFSi, 1.4TSi, 1.4TFSi, 1.5TFSi, 1.8TFSi, 1.6TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587295768914,"sku":"SPC148","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC148_BOX.jpg?v=1787119329"},{"product_id":"street-coilover-kit-audi-a3-8v-multilink-2012-2020","title":"Street Coilover kit for Audi A3 (8V) Multilink 2012-2020","description":"\u003cp\u003eWhether you're commuting through town or rolling into a weekend meet, the Stance+ Street Coilover Kit makes your Audi A3 (8V) Hatchback, Sportback, Cabriolet and Saloon look and feel the part. Fully height-adjustable with uprated damping for a sportier ride without the bone-shaking stiffness of budget kits.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the multilink rear suspension variant. It's essential to check which rear suspension type your car has before ordering. Fitting the wrong kit can cause problems. If you're unsure, drop us a message and we'll help you confirm.\u003c\/p\u003e\n\u003cp\u003eWhat you'll notice first is how much flatter the car corners. The 25–30% uprated damping eliminates the lazy body roll of the factory setup, and the high-tensile powder-coated springs keep the car composed over uneven surfaces. It's the kind of upgrade that makes you wonder why you didn't do it sooner. Tighter, more responsive, and genuinely more enjoyable to drive.\u003c\/p\u003e\n\u003cp\u003eSuitable for road use and the occasional track day, the Stance+ Street Coilover Kit strikes the right balance between improved handling and everyday comfort. It's a genuine upgrade over the factory setup in every measurable way. Suitable for both the 2WD and Quattro. We sell hundreds of these kits every year, a very popular car to be lowered. Fitting is a straightforward swap with your factory suspension. Reuse your OE top mounts and bearings (though we'd always recommend fitting fresh ones). Get it fitted by a qualified mechanic, have the tracking and alignment reset on a proper Hunter laser alignment machine, and you're good to go. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8V) (2012-2020) Hatchback, Sportback, Cabriolet and Saloon. 2WD and Quattro. Independent\/multilink rear suspension. Fitted with the following engines: 1.0TFSi, 1.2TFSi, 1.4TSi, 1.4TFSi, 1.5TFSi, 1.8TFSi, 1.6TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587295801682,"sku":"SPC168","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC168_BOX.jpg?v=1787119330"},{"product_id":"street-coilover-kit-audi-a4-b8-8k2-2007-2015","title":"Street Coilover kit for Audi A4 (B8 (8K2)) 2007-2015","description":"\u003cp\u003eEvery Stance+ Street Coilover Kit is designed and engineered in the UK, with every unit inspected throughout the manufacturing process. This kit for the Audi A4 B8 (8K2) Saloon 2WD and Quattro is built from steel with a durable black powder-coated finish, and delivers the kind of ride quality and adjustability that has made Stance+ a trusted name in the tuning world.\u003c\/p\u003e\n\u003cp\u003eThe dampers are filled with FUCH oil for consistent performance and are set approximately 25–30% firmer than the factory shocks. That translates to noticeably less body roll, crisper turn-in, and a much more planted feel at speed. The springs are shot-peened chrome silicon steel with a black powder coat finish. Tough enough for British roads and good enough for weekend track sessions.\u003c\/p\u003e\n\u003cp\u003eSuitable for road use and the occasional track day, the Stance+ Street Coilover Kit strikes the right balance between improved handling and everyday comfort. It's a genuine upgrade over the factory setup in every measurable way.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly, reusing your original top mounts and bearings. We always advise professional fitting and a full laser alignment afterwards. Covered by the Stance+ 2-year warranty for total peace of mind.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A4 B8 (8K2) (2007-2015) Saloon. 2WD and Quattro. Fitted with the following engines: 1.8T, 1.8TFSi, 2.0TFSi, 3.0TFSi, 3.2FSi, 2.0TDi, 2.7TDi, 3.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587398496594,"sku":"SPC020","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC020_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a4-b8-8k5-2007-2015","title":"Street Coilover kit for Audi A4 (B8 (8K5)) 2007-2015","description":"\u003cp\u003eLower it. Stiffen it. Make it handle. The Stance+ Street Coilover Kit for the Audi A4 B8 (8K5) Saloon and Estate does all three. A complete bolt-on suspension upgrade that replaces your tired factory setup with something far more capable.\u003c\/p\u003e\n\u003cp\u003eThe FUCH oil-filled dampers provide consistent, reliable damping whether you're on a fast A-road or crawling through traffic. Rates are set around 25–30% above stock, which gives the car a noticeably sportier character without the harshness that plagues cheaper kits. Short, hardened chrome piston rods and built-in elastomer bump stops ensure durability and a controlled ride across a wide range of conditions.\u003c\/p\u003e\n\u003cp\u003eWhether you're after improved handling for spirited road driving or just want your car sitting properly, the Stance+ Street kit delivers on both fronts. Comfortable enough for the daily commute, sharp enough to put a smile on your face when the road opens up.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A4 B8 (8K5) (2007-2015) Saloon and Estate. 2WD and Quattro. Fitted with the following engines: 1.8T, 1.8TFSi, 2.0TFSi, 3.0TFSi, 3.2FSi, 2.0TDi, 2.7TDi, 3.0TDi, 3.0TFSi S4.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587398627666,"sku":"SPC020","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC020_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a5-b8-8f7-8ta-2007-2017","title":"Street Coilover kit for Audi A5 (B8 (8F7\/8TA)) 2007-2017","description":"\u003cp\u003eA favourite in show events, the Stance+ Street Coilover Kit gives your Audi A5 B8 (8F7\/8TA) Cabriolet and Sportback a properly dialled-in look and feel. Fully height-adjustable and built with uprated damping, it's the go-to choice for enthusiasts who want quality without compromise.\u003c\/p\u003e\n\u003cp\u003eThe uprated dampers, approximately 25–30% stiffer than OE, deliver a tangible improvement in body control. Expect less lean through corners, sharper turn-in, and a more connected feel from behind the wheel. The springs are high-tensile chrome silicon steel, shot-peened for strength and powder-coated for protection against the British weather. Firm enough to feel the difference, compliant enough to live with every day.\u003c\/p\u003e\n\u003cp\u003eSuitable for road use and the occasional track day, the Stance+ Street Coilover Kit strikes the right balance between improved handling and everyday comfort. It's a genuine upgrade over the factory setup in every measurable way. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eEverything you need is in the box, bar the factory top mounts and bearings which we recommend replacing with new items during installation. Have it fitted by a professional, get the geometry set up properly, and enjoy the results. All Stance+ Street Coilover Kits come with a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A5 B8 (8F7\/8TA) (2007-2017) Cabriolet and Sportback. 2WD and Quattro. Fitted with the following engines: 1.8T, 1.8TFSi, 2.0TFSi, 3.0TFSi, 3.2FSi, 2.0TDi, 2.7TDi, 3.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587398725970,"sku":"SPC020","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC020_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a5-b8-8t3-2007-2017","title":"Street Coilover kit for Audi A5 (B8 (8T3)) 2007-2017","description":"\u003cp\u003eSteel construction, black powder-coated finish, oil-filled dampers uprated 25–30% over standard. The Stance+ Street Coilover Kit for the Audi A5 B8 (8T3) Coupe 2WD and Quattro is engineered for drivers who want their car lower, tighter, and better looking without sacrificing everyday usability.\u003c\/p\u003e\n\u003cp\u003eUnderneath, the kit uses FUCH oil-filled dampers matched to powder-coated chrome silicon springs, both uprated by around 25–30% for a sportier, more controlled feel. Hardened chrome piston rods and elastomer bump stops are built in for long-term durability, and helper springs are included where needed to prevent spring dislocation when the car is on a jack or ramp.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for enthusiasts who use their cars every day. The ride is firmer and more controlled than stock, but it's not harsh. It's that satisfying sweet spot where the car feels sportier and more capable without punishing you on rough surfaces. We sell hundreds of these kits every year, a very popular car to be lowered.\u003c\/p\u003e\n\u003cp\u003eFitting is a straightforward swap with your factory suspension. Reuse your OE top mounts and bearings (though we'd always recommend fitting fresh ones). Get it fitted by a qualified mechanic, have the tracking and alignment reset on a proper laser machine, and you're good to go. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A5 B8 (8T3) (2007-2017) Coupe. 2WD and Quattro. Fitted with the following engines: 1.8T, 1.8TFSi, 2.0TFSi, 3.0TFSi, 3.2FSi, 2.0TDi, 2.7TDi, 3.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587399315794,"sku":"SPC020","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC020_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-a6-c5-4b-1997-2004","title":"Street Coilover kit for Audi A6 (C5\/4B) 1997-2004","description":"\u003cp\u003eYour Audi A6 (C5\/4B) Saloon and Estate was built for more than factory ride height. The Stance+ Street Coilover Kit is a fully adjustable suspension upgrade that lets you set the perfect drop for your driving style, whether that's a clean daily setup or full-on low life.\u003c\/p\u003e\n\u003cp\u003eWith damping rates set approximately 25–30% above standard, these oil-filled shock absorbers keep your Audi A6 (C5\/4B) Saloon or Estate composed where the factory setup starts to feel soft and vague. Corner entry is more predictable, body roll is significantly reduced, and the whole car feels like it's working with you rather than against you. The ride is firm but forgiving. Stiff enough to feel sporty, smooth enough for everyday use.\u003c\/p\u003e\n\u003cp\u003eSuitable for road use and the occasional track day, the Stance+ Street Coilover Kit strikes the right balance between improved handling and everyday comfort. It's a genuine upgrade over the factory setup in every measurable way.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your existing factory top mounts and bearings. We'd suggest replacing them with new ones for the best results. Fitting should be carried out by a qualified technician, with tracking and alignment reset once installed. Stance+ Street Coilovers are backed by a 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A6 (C5\/4B) (1997-2004) Saloon and Estate. 2WD. Fitted with the following engines: 1.8, 1.8T, 2.0 20v, 2.4 30v, 2.8 V6, 3.0 V6, 1.9TDi, 2.5TDi V6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587399479634,"sku":"SPC018","price":279.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC018_BOX.jpg?v=1787119331"},{"product_id":"street-coilover-kit-audi-a6-c7-4g-2012-2018","title":"Street Coilover kit for Audi A6 (C7\/4G) 2012-2018","description":"\u003cp\u003eIf you're running an Audi A6 (C7\/4G) Saloon or Estate and want it sitting right, the Stance+ Street Coilover Kit is where it starts. Height-adjustable by the millimetre, UK-designed and engineered, and ready to handle daily driving as well as the occasional show or track outing.\u003c\/p\u003e\n\u003cp\u003eWhat you'll notice first is how much flatter the car corners. The 25–30% uprated damping eliminates the lazy body roll of the factory setup, and the high-tensile powder-coated springs keep the car composed over uneven surfaces. It's the kind of upgrade that makes you wonder why you didn't do it sooner. Tighter, more responsive, and genuinely more enjoyable to drive.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Street is our entry-level coilover kit, but don't let that fool you. It's a serious upgrade over factory suspension. Thousands of drivers across the UK run these kits daily, and the 2-year unlimited mileage warranty means you can fit with confidence.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, using your existing top mounts and bearings. We recommend fitting new top mounts while you're at it. Professional fitting is strongly advised, and a full alignment should be carried out once installed.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi A6 (C7\/4G) (2012-2018) Saloon and Estate. 2WD and Quattro. Fitted with the following engines: 1.8TFSi, 2.8FSi, 2.5FSi, 2.8FSi, 3.0FSi, 3.0TFSi, 2.0TDi, 3.0TDi, 4.0 V8 S6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587399643474,"sku":"SPC020","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC020_BOX.jpg?v=1787117110"},{"product_id":"street-coilover-kit-audi-tt-fv3-fv9-solid-beam-2014-2023","title":"Street Coilover kit for Audi TT (FV3\/FV9) Solid Beam 2014-2023","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, this Street Coilover Kit for the Audi TT (FV3\/FV9) Coupe and Roadster is a direct replacement for your factory suspension. Every unit is inspected throughout the build process, so what arrives at your door is ready to fit and ready to perform.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the solid beam (torsion beam) rear axle variant. It's essential to check which rear suspension type your car has before ordering. Fitting the wrong kit can cause problems. If you're unsure, drop us a message and we'll help you confirm.\u003c\/p\u003e\n\u003cp\u003eStance+ Street dampers are oil-filled and uprated by around 25–30% over factory spec. That means less wallow, less body roll, and a noticeably more composed ride through B-roads and motorway sweepers alike. The chrome silicon springs are powder-coated black and built to last, while helper springs prevent dislocation when the car's jacked up for maintenance or wheel changes.\u003c\/p\u003e\n\u003cp\u003eYour Audi TT (FV3\/FV9) was designed with driving pleasure in mind. The Stance+ Street kit enhances that with a lower stance, stiffer damping, and the kind of handling improvement that makes every drive more rewarding. Everything you need is in the box, bar the factory top mounts and bearings which we recommend replacing with new items. Have it fitted by a professional and get the geometry set up properly. All Stance+ Street Coilover Kits come with a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi TT (FV3\/FV9) (2014-2023) Coupe and Roadster. 2WD and Quattro. Solid beam rear suspension. Fitted with the following engines: 1.8TFSi, 2.0TFSi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587399774546,"sku":"SPC148","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC148_BOX.jpg?v=1787119329"},{"product_id":"street-coilover-kit-audi-tt-fv3-fv9-multilink-2014-2023","title":"Street Coilover kit for Audi TT (FV3\/FV9) Multilink 2014-2023","description":"\u003cp\u003eFactory ride height on the Audi TT (FV3\/FV9) Coupe and Roadster leaves a lot to be desired. The Stance+ Street Coilover Kit sorts that out with millimetre-precise height adjustment, letting you dial in exactly the drop you want, from a subtle fast-road setup to a properly slammed show stance.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the multilink rear suspension variant. It's essential to check which rear suspension type your car has before ordering. Fitting the wrong kit can cause problems. If you're unsure, drop us a message and we'll help you confirm.\u003c\/p\u003e\n\u003cp\u003eThe dampers are filled with FUCH oil for consistent performance and are set approximately 25–30% firmer than the factory shocks. That translates to noticeably less body roll, crisper turn-in, and a much more planted feel at speed. The springs are shot-peened chrome silicon steel with a black powder coat finish. Tough enough for British roads and good enough for weekend track sessions.\u003c\/p\u003e\n\u003cp\u003eYour Audi TT (FV3\/FV9) Coupe and Roadster was designed with driving pleasure in mind. The Stance+ Street kit enhances that with a lower stance, stiffer damping, and the kind of handling improvement that makes every drive more rewarding. Fitting is a straightforward swap with your factory suspension. Get it fitted by a qualified mechanic, have the tracking and alignment reset, and you're good to go. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with a removable sleeve suitable for 50\/55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Street Ride Height Adjustable Coilover Kit is suitable for: Audi TT (FV3\/FV9) (2014-2023) Coupe and Roadster. 2WD and Quattro. Independent\/multilink rear suspension. Fitted with the following engines: 1.8TFSi, 2.0TFSi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52587399971154,"sku":"SPC168","price":299.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC168_BOX.jpg?v=1787119330"},{"product_id":"ultra-coilover-kit-audi-a1-8x-2010-2018","title":"Ultra Coilover kit for Audi A1 (8X) 2010-2018","description":"\u003cp\u003eEvery Stance+ Ultra Coilover Kit is designed and engineered in the UK, with each unit inspected throughout the manufacturing process. This kit for the Audi A1 (8X) Hatchback brings gas-assisted damping, zinc-plated bodies, and NOK oil seals to a platform that deserves quality lowered suspension.\u003c\/p\u003e\n\u003cp\u003eThe FUCH oil-filled, gas-assisted dampers provide consistent, controlled damping whether you're on a fast A-road or threading through town. Spring and damper rates are set around 25-30% above stock. The gas assistance smooths out the response compared to a straight oil-filled setup, giving the Ultra its more refined character. Short, hardened chrome piston rods and built-in elastomer bump stops add durability, and NOK oil seals keep the dampers healthy for the long run.\u003c\/p\u003e\n\u003cp\u003eThe Audi A1 (8X) Hatchback is one of those cars that transforms when it's been lowered. With the Stance+ Ultra Coilover kit being height adjustable you can dial in the perfect ride height giving the car a perfect stance. The Stance+ Ultra kit allows up to 100mm of adjustable drop, gas-assisted damping for a refined ride, and zinc-plated bodies that hold up through the British weather.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly and reuses your original top mounts and bearings. Professional fitting and a full laser alignment are always recommended once installed. Heavy duty short drop links are supplied where required. Covered by the Stance+ 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A1 (8X) (2010-2018) Hatchback. 2WD. Fitted with the following engines: 1.0TFSi, 1.2TFSi, 1.4TFSi, 1.4TSi, 1.8TFSi, 1.4TDi, 1.6TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633580568914,"sku":"SPUC093","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC093_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a2-8z-1999-2005","title":"Ultra Coilover kit for Audi A2 (8Z) 1999-2005","description":"\u003cp\u003eLower it. Refine it. Make it handle properly. The Stance+ Ultra Coilover Kit for the Audi A2 (8Z) Hatchback does exactly that. Gas-assisted, oil-filled dampers, zinc-plated anti-corrosion bodies, and millimetre-precise height adjustment from 30 to 100mm.\u003c\/p\u003e\n\u003cp\u003eThe gas-assisted, oil-filled dampers, uprated approximately 25-30% over standard, give a tangible improvement in body control without the harshness you might expect from a coilover. Cornering is flatter, turn-in is crisper, and the whole car feels more connected and composed. NOK oil seals are fitted throughout for long-term reliability. The springs are high-tensile chrome silicon steel, shot-peened for strength and powder-coated black to match the zinc-plated bodies.\u003c\/p\u003e\n\u003cp\u003eThere's something about a properly lowered Audi A2 (8Z) that just works. The Stance+ Ultra Coilover Kit gives you up to 100mm of adjustable drop, a more refined ride than entry-level kits thanks to the gas-assisted damping and a build quality that lasts.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, reusing your existing OE top mounts and bearings. We recommend fitting fresh top mounts at the same time, as it's the ideal opportunity to replace worn OE parts. Heavy duty short drop links are included. Professional fitting is strongly advised, followed by a full laser alignment. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A2 (8Z) (1999-2005) Hatchback. 2WD. Fitted with the following engines: 1.4, 1.6FSi, 1.2TDi, 1.4TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633580634450,"sku":"SPUC072","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC072_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8l-1996-2002","title":"Ultra Coilover kit for Audi A3 (8L) 1996-2002","description":"\u003cp\u003eA firm favourite in show events and meets, the Stance+ Ultra Coilover Kit gives your Audi A3 (8L) 2WD Hatchback a properly dialled-in stance and a noticeably more refined ride than entry-level kits. Gas-assisted damping and zinc-plated construction set it apart. The kit is suitable for all Audi A3 (8L) 2WD Hatchback and will fit both Petrol and Diesel engines.\u003c\/p\u003e\n\u003cp\u003eUnderneath, the kit uses FUCH oil-filled, gas-assisted dampers matched to powder-coated chrome silicon springs, both uprated by around 25-30% for a sportier, more controlled feel. The gas assistance is the key difference here, adding a refinement and progressiveness to the damping response that pure oil-filled kits simply can't match. NOK oil seals and hardened chrome piston rods round out a seriously well-specified package.\u003c\/p\u003e\n\u003cp\u003eDesigned for enthusiasts who use their cars every day but still want a great handling and looking car, the Stance+ Ultra sits in that sweet spot between performance and practicality. The gas-assisted damping is firm and controlled without being harsh, and 100mm of drop means there's plenty of room to find your perfect driving height.\u003c\/p\u003e\n\u003cp\u003eEverything you need is in the box, including heavy duty short drop links and two ride height adjustment spanners. The only parts reused from your factory setup are the top mounts and bearings, so we'd suggest fitting new ones at the same time. Have the kit installed by a professional, get the alignment sorted, and enjoy the results. 2-year unlimited mileage warranty included.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1996-2002) Hatchback. 2WD. Fitted with the following engines: 1.6, 1.8, 1.8T, 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633580699986,"sku":"SPUC001","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC001_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8l-s3-quattro-1996-2003","title":"Ultra Coilover kit for Audi A3 (8L) S3 Quattro 1996-2003","description":"\u003cp\u003eZinc-plated bodies, gas-assisted oil-filled dampers, NOK oil seals, and up to 100mm of adjustable drop. The Stance+ Ultra Coilover Kit for the Audi A3 (8L) Hatchback 1.8T, 1.8T S3 Quattro is engineered for drivers who want serious lowering without compromising on ride quality.\u003c\/p\u003e\n\u003cp\u003eWith gas-assisted damping uprated around 25-30% above standard, these oil-filled shock absorbers keep your Audi A3 (8L) Hatchback 1.8T and S3 Quattro composed where the factory setup starts to feel soft and vague. The gas charge adds a refinement that makes the difference between a merely firmer ride and a genuinely more capable one. NOK oil seals extend damper life, and the zinc-plated bodies add proper corrosion resistance for the long term.\u003c\/p\u003e\n\u003cp\u003eDesigned for enthusiasts who use their cars every day but still want a comfortable ride and proper lowered stance, the Stance+ Ultra sits in that sweet spot between performance and practicality. The gas-assisted damping is firm and controlled without being harsh, and 100mm of drop means there's plenty of room to find your perfect level.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: it's a direct swap with your factory suspension, reusing your OE top mounts and bearings, though we'd always recommend fitting new ones. Have the kit fitted by a qualified mechanic, get the geometry reset on a proper Hunter laser alignment machine, and you're done. Two adjustment spanners and a pair of heavy-duty short drop links are included where needed. 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1996-2003) Hatchback. Quattro. Fitted with the following engines: 1.8T, 1.8T S3.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633580798290,"sku":"SPUC013","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC013_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8l-quattro-1999-2003","title":"Ultra Coilover kit for Audi A3 (8L) Quattro 1999-2003","description":"\u003cp\u003eYour Audi A3 (8L) 1.9TDi Quattro deserves better than factory ride height. The Stance+ Ultra Coilover Kit is a fully adjustable, gas-assisted suspension upgrade with up to 100mm of drop and the refined ride quality that makes the Ultra range stand out.\u003c\/p\u003e\n\u003cp\u003eOn the road, the improvement is immediate. The gas-assisted, oil-filled dampers are tuned approximately 25-30% stiffer than the factory shocks, delivering noticeably flatter cornering and a more planted feel. Your Audi A3 (8L) 1.9TDi Quattro will change direction with more confidence, feel more settled through sweeping bends, and respond more precisely to your inputs. Firmer than stock, yes, but the gas assistance takes the edge off a firmer ride and gives a more refined feel than a straight oil-filled setup.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ Ultra is the step up from entry-level that many drivers are looking for. Gas-assisted dampers, zinc-plated bodies, NOK oil seals, and up to 100mm of drop. All the spec you need, with none of the compromise.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your OE top mounts and bearings, and we'd always recommend replacing them with new items for the best results. Heavy duty short drop links are included where needed, and two C spanners come in the box for ride height adjustment. Fitting should be done by a qualified technician, with tracking and alignment reset afterwards. Stance+ Ultra Coilovers are backed by a 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8L) (1999-2003) Hatchback. Quattro. Fitted with the following engines: 1.9TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633581846866,"sku":"SPUC013","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC013_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8p1-s3-quattro-2006-2012","title":"Ultra Coilover kit for Audi A3 (8P1) S3 Quattro 2006-2012","description":"\u003cp\u003eTransform your Audi A3 (8P1) Hatchback 2.0TFSi S3 Quattro from standard to outstanding with the Stance+ Ultra Coilover Kit. This is a real professional step up from the entry-level OE suspension parts, bringing gas-assisted damping, zinc-plated anti-corrosion bodies, and NOK oil seals to the table.\u003c\/p\u003e\n\u003cp\u003eWhat separates the Ultra from a basic coilover is the gas-assisted damping. The oil-filled, gas-charged dampers deliver a noticeably more refined and progressive response through corners and over uneven surfaces. Uprated by around 25-30% over standard, the result is less body roll, more predictable handling, and a ride that's firm without being punishing. Chrome silicon springs, shot-peened and powder-coated, complete a package built to last.\u003c\/p\u003e\n\u003cp\u003eThis kit is built for enthusiasts who want quality they can feel as well as see. The gas-assisted dampers give a more progressive, refined response than straight oil-filled units, and the zinc-plated bodies mean it'll still be looking the part years down the line.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly and reuses your original top mounts and bearings. Professional fitting and a full laser alignment are always recommended once installed. Heavy duty short drop links are supplied where required. Covered by the Stance+ 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameter.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8P1) (2006-2012) Hatchback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633581912402,"sku":"SPUC051","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC036_55_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8p7-2008-2010","title":"Ultra Coilover kit for Audi A3 (8P7) 2008-2010","description":"\u003cp\u003eRunning an Audi A3 (8P7) Cabriolet and want it sitting properly low with a more refined ride? The Stance+ Ultra Coilover Kit delivers up to 90mm of adjustable drop with gas-assisted, oil-filled dampers that take the edge off a firmer ride without losing any of the performance.\u003c\/p\u003e\n\u003cp\u003eStance+ Ultra dampers are gas-assisted and oil-filled, with FUCH damper oil for maximum lubricity and NOK oil seals for durability. Damping rates are set approximately 25-30% above factory spec, which translates to less body roll, sharper turn-in, and a more composed feel on both fast A-roads and motorway runs. The gas charge gives the dampers a more progressive, refined response that sets the Ultra apart from entry-level oil-only kits.\u003c\/p\u003e\n\u003cp\u003eWhether you're after sharper handling for B-road blasts or just want your car sitting properly low, the Stance+ Ultra kit delivers on all fronts. More refined than a basic coilover, more capable than the factory suspension, and comfortable enough to use every single day.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, reusing your existing OE top mounts and bearings. We recommend fitting fresh top mounts at the same time, as it's the ideal opportunity to replace the worn OE parts. Heavy duty short drop links are included. Professional fitting is strongly advised, followed by a full laser alignment. Backed by a 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameter.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8P7) (2008-2010) Cabriolet. 2WD. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633581945170,"sku":"SPUC051","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC036_55_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8pa-2004-2012","title":"Ultra Coilover kit for Audi A3 (8PA) 2004-2012","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, this Ultra Coilover Kit for the Audi A3 (8PA) Sportback will fit all Petrol and Diesel engines. Suitable for 2WD and Quattro platform. It is a direct replacement for your factory suspension. Every unit is inspected throughout the build process, and the result is a refined, capable kit that earns its place in the mid-range.\u003c\/p\u003e\n\u003cp\u003eThe gas-assisted, oil-filled dampers are filled with FUCH oil and set approximately 25-30% firmer than the factory shocks. The gas charge adds a smoother, more progressive feel through the damper stroke, translating to better body control, flatter cornering, and a more planted feel at speed. NOK oil seals keep everything running cleanly over time. The springs are shot-peened chrome silicon steel, powder-coated black for durability.\u003c\/p\u003e\n\u003cp\u003eDesigned for enthusiasts who use their cars every day but still want a comfortable drive with a lowered stance, the Stance+ Ultra sits in that sweet spot between performance and practicality. The gas-assisted damping is firm and controlled without being harsh, and 90mm of drop means there's plenty of room to find your perfect ride height.\u003c\/p\u003e\n\u003cp\u003eEverything you need is in the box, including a pair of heavy-duty short drop links where required and two adjustment spanners. The only parts reused from your factory setup are the top mounts and bearings, so we'd suggest fitting new ones at the same time. Have the kit installed by a professional, get the alignment sorted, and enjoy the results. 2-year unlimited mileage warranty included.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameter.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8PA) (2004-2012) Sportback. 2WD and Quattro. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 3.2FSi V6, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633582174546,"sku":"SPUC051","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC036_55_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-a3-8pa-s3-quattro-2006-2012","title":"Ultra Coilover kit for Audi A3 (8PA) S3 Quattro 2006-2012","description":"\u003cp\u003eIf you want more than the basics, the Stance+ Ultra Coilover Kit is the answer for your Audi A3 (8PA) Sportback 2.0TFSi S3 Quattro. Gas-assisted, oil-filled dampers with NOK oil seals, zinc-plated bodies, and up to 90mm of adjustable drop on most applications.\u003c\/p\u003e\n\u003cp\u003eThe FUCH oil-filled, gas-assisted dampers provide consistent, controlled damping whether you're on a fast A-road or threading through town. Damping rates are set around 25-30% above stock. The gas assistance smooths out the response compared to a straight oil-filled setup, giving the Ultra Coilover Kit its more refined character. Short, hardened chrome piston rods and built-in elastomer bump stops add durability, and NOK oil seals keep the dampers healthy for the long run.\u003c\/p\u003e\n\u003cp\u003eDesigned for enthusiasts who use their cars every day but still want a useable and comfortable lowered stance. The Stance+ Ultra sits in that sweet spot between performance and practicality. The gas-assisted damping is firm and controlled without being harsh, and 90mm of drop means there's plenty of room to find your perfect ride height.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward: it's a direct swap with your factory suspension, reusing your OE top mounts and bearings, though we'd always recommend fitting new ones. Have the kit fitted by a qualified mechanic, get the geometry reset on a proper Hunter laser alignment machine, and you're done. Two adjustment spanners and a pair of heavy-duty short drop links are included. 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameter.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8PA) (2006-2012) Sportback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633582207314,"sku":"SPUC051","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC036_55_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-tt-8j-2006-2014","title":"Ultra Coilover kit for Audi TT (8J) 2006-2014","description":"\u003cp\u003eThe Audi TT (8J) Coupe and Roadster is a very popular car to be tuned and modified, it responds beautifully when lowered with some quality coilover suspension. The Stance+ Ultra Coilover Kit enhances the ride quality and cornering performance with a fully height-adjustable suspension upgrade, designed and engineered in the UK and made exclusively for Stance+. This Ultra Coilover fits both the Audi TT (8J) Coupe and Roadster and will fit the 2WD and Quattro models.\u003c\/p\u003e\n\u003cp\u003eThe gas-assisted, oil-filled dampers, uprated approximately 25-30% over standard, give a tangible improvement in body control without the harshness you might expect. Cornering is flatter, turn-in is crisper, and the whole car feels more connected and composed. NOK oil seals are fitted throughout for long-term reliability. The springs are high-tensile chrome silicon steel, shot-peened for strength and powder-coated black to match the zinc-plated bodies.\u003c\/p\u003e\n\u003cp\u003eBuilt for drivers who use their cars every day, the Stance+ Ultra kit suits the Audi TT (8J)'s sporting character perfectly. The gas-assisted damping keeps things composed at speed, the height adjustment gives you freedom to set it up exactly how you want, and the zinc-plated bodies keep it looking right for years.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your OE top mounts and bearings, and we'd always recommend replacing them with new items for the best results. Heavy duty short drop links are included where needed, and two C spanners come in the box for ride height adjustment. Fitting should be done by a qualified technician, with tracking and alignment reset afterwards. Stance+ Ultra Coilovers are backed by a 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameter.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi TT (8J) (2006-2014) Coupe and Roadster. 2WD and Quattro models. Fitted with the following engines: 1.8TFSi, 2.0TFSi, 2.5TFSi RS, 3.2 V6, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633582272850,"sku":"SPUC051","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC036_55_BOX.jpg?v=1787117110"},{"product_id":"ultra-coilover-kit-audi-tt-8n3-8n9-quattro-1998-2006","title":"Ultra Coilover kit for Audi TT (8N3\/8N9) Quattro 1998-2006","description":"\u003cp\u003eImprove the performance and handling of your Audi TT (8N3\/8N9) Coupe and Roadster Quattro with the Stance+ Ultra Coilover Kit. A complete suspension replacement with oil-filled, gas-assisted dampers, zinc-plated bodies, and up to 100mm of drop on most applications.\u003c\/p\u003e\n\u003cp\u003eUnderneath, the kit uses FUCH oil-filled, gas-assisted dampers matched to powder-coated chrome silicon springs, both uprated by around 25-30% for a sportier, more controlled feel. The gas assistance is the key difference here, adding a refinement and progressiveness to the damping response that pure oil-filled kits simply can't match. NOK oil seals and hardened chrome piston rods round out a seriously well-specified package.\u003c\/p\u003e\n\u003cp\u003eBuilt for drivers who use their cars every day for fast road or track, the Stance+ Ultra kit suits the Audi TT (8N3\/8N9) 1.8T, 3.2V6 Quattro's sporting character perfectly. The gas-assisted damping keeps things composed at speed, the height adjustment gives you freedom to set it up exactly how you want, and the zinc-plated bodies keep it looking right for years.\u003c\/p\u003e\n\u003cp\u003eThis is a complete bolt-on kit. It replaces your factory suspension directly and reuses your original top mounts and bearings. Professional fitting and a full laser alignment are always recommended once installed. Heavy duty short drop links are supplied where required. Covered by the Stance+ 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Ultra Ride Height Adjustable Coilover Kit is suitable for: Audi TT (8N3\/8N9) (1998-2006) Coupe and Roadster. Quattro models only. Fitted with the following engines: 1.8T, 3.2V6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52633582502226,"sku":"SPUC013","price":359.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPUC013_BOX.jpg?v=1787117110"},{"product_id":"proline-fixed-damping-coilover-kit-audi-a3-8p1-2003-2013","title":"Proline Fixed Damping Coilover kit for Audi A3 (8P1) 2003-2012","description":"\u003cp\u003eMost coilovers compromise ride quality at extreme ride heights. The Stance+ Proline doesn't. The base-adjustable front struts physically change length rather than running the spring seat to the limit, so your Audi A3 (8P1) Hatchback 2WD and Quattro maintains 100% damper travel whether it's sitting at 30mm or 75mm of drop.\u003c\/p\u003e\n\u003cp\u003eBase adjustment is the Proline's defining feature. Where most coilover kits achieve lowering by repositioning the spring seat, the Proline front struts change in physical length. Shorten the strut to go lower, lengthen it to go higher. The result is that your piston rod always has its full stroke available, giving the suspension system everything it needs to do its job properly at any ride height from 30 to 75mm of drop. Adjustment can be done while the kit is on the car.\u003c\/p\u003e\n\u003cp\u003eUnderneath the Proline's headline drop numbers is a properly specified damper package. Gas-assisted, oil-filled FUCH dampers uprated around 25-30% over standard, with NOK oil seals for durability and FUCH damper oil for consistent lubricity. Chrome silicon springs are shot-peened for strength and powder-coated black. Powder coated damper bodies complete a kit that's engineered to perform and built to last.\u003c\/p\u003e\n\u003cp\u003eFixed damping is set at around 25-30% above factory specification, tuned to suit the specific weight and geometry of your Audi A3 (8P1) Hatchback 2WD and Quattro. It's a firm, capable setup that strikes the right balance between handling performance and day-to-day usability.\u003c\/p\u003e\n\u003cp\u003eThe Proline is the kit for enthusiasts who've thought seriously about how low they want their car. Up to 75mm of drop with full damper travel maintained at every setting means you're not compromising the way the car rides to get the look you want. The base-adjustable design makes that possible where conventional coilovers simply can't go.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components to protect them and make future height adjustments straightforward. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8P1) (2003-2012) Hatchback. 2WD and Quattro models. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8T, 1.8FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 1.6TDi, 1.9TDi, 2.0TDi, 3.2FSi V6.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640559923538,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"proline-fixed-damping-coilover-kit-audi-a3-8p1-s3-quattro-2006-2012","title":"Proline Fixed Damping Coilover kit for Audi A3 (8P1) S3 Quattro 2006-2012","description":"\u003cp\u003eThe Stance+ Proline Coilover Kit takes extreme lowering seriously. The front struts are adjustable in base length, meaning the whole unit shortens or lengthens to get the ride height you want, maintaining full damper travel throughout. Up to 75mm of drop for your Audi A3 S3 (8P1) Hatchback Quattro on most applications.\u003c\/p\u003e\n\u003cp\u003eThe base-adjustable design is what sets the Proline apart from conventional coilovers. On a standard kit, lowering is achieved by moving the spring seat down the shock body, which eventually limits damper travel and compromises ride quality. The Proline works differently. The front strut physically shortens or lengthens as a whole unit, meaning the piston rod always has its full range of travel regardless of ride height. You get the extreme drop without the ride quality penalty. Adjustment can be made with the kit still fitted to the vehicle.\u003c\/p\u003e\n\u003cp\u003eGas-assisted, oil-filled dampers with FUCH damper oil and NOK oil seals give the Proline a refined, progressive damping response uprated approximately 25-30% over factory spec. The result is less body roll, crisper steering response, and a more planted, predictable feel through corners. Powder coated damper bodies resist corrosion, and chrome silicon springs shot-peened for strength and powder-coated black are built to last.\u003c\/p\u003e\n\u003cp\u003eThis kit runs fixed uprated damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your Audi A3 S3 (8P1) Hatchback Quattro to deliver the best balance of performance and road comfort at extreme ride heights.\u003c\/p\u003e\n\u003cp\u003eThe Proline is designed for enthusiasts who want extreme lowering with a ride quality that still works on British roads. The base-adjustable front struts maintain 100% damper travel at any setting, and the gas-assisted damper package keeps things refined even when the car is sitting as low as it goes.\u003c\/p\u003e\n\u003cp\u003eA complete bolt-on replacement for your factory suspension, reusing your original top mounts and bearings. New top mounts are always recommended. Copper grease the threaded components before fitting. Professional installation and a full laser alignment are essential once the kit is on. Drop links are supplied where required. Covered by the Stance+ 2-year unlimited mileage warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8P1) (2006-2012) Hatchback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640560087378,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"proline-fixed-damping-coilover-kit-audi-a3-8p7-2008-2010","title":"Proline Fixed Damping Coilover kit for Audi A3 (8P7) 2008-2010","description":"\u003cp\u003eIf you're serious about how low your Audi A3 (8P7) Cabriolet sits, the Stance+ Proline is the kit for you. Up to 75mm of drop on most applications, achieved through a base-adjustable design that keeps 100% piston rod travel no matter where you set the ride height. Extreme lowering, uncompromised comfort.\u003c\/p\u003e\n\u003cp\u003eThe key to the Proline's capability is base adjustment. Rather than simply winding the spring seat down the coilover body, the Proline front struts are adjustable in overall length. The whole unit gets shorter or longer depending on your target ride height, and because the piston rod position relative to the strut body doesn't change, you retain 100% damper travel throughout. Height adjustment is possible while the kit remains fitted to the car.\u003c\/p\u003e\n\u003cp\u003eThe Proline's gas-assisted, oil-filled dampers are filled with FUCH oil and fitted with NOK oil seals throughout. Damping rates are set approximately 25-30% above factory, giving a noticeably sportier character without punishing harshness. The gas assistance adds a progressive, refined feel to the damping response, keeping the car composed at extreme ride heights where the suspension geometry is working harder.\u003c\/p\u003e\n\u003cp\u003eFixed damping is set at around 25-30% above factory specification, tuned to suit the specific weight and geometry of your Audi A3 (8P7) Cabriolet. It's a firm, capable setup that strikes the right balance between handling performance and day-to-day usability.\u003c\/p\u003e\n\u003cp\u003eThe Proline is designed for enthusiasts who want extreme lowering with a ride quality that still works on British roads. The base-adjustable front struts maintain 100% damper travel at any setting, and the gas-assisted damper package keeps things refined even when the car is sitting as low as it goes.\u003c\/p\u003e\n\u003cp\u003eThe kit is a direct replacement for your factory suspension, reusing your existing OE top mounts and bearings. Fresh top mounts are recommended. Copper grease the threaded base and adjuster collars before fitting. Professional fitting is essential, followed by a full laser alignment. Drop links are supplied where needed. 2-year unlimited mileage warranty included.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8P7) (2008-2010) Cabriolet. 2WD. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640560120146,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"proline-fixed-damping-coilover-kit-audi-a3-8pa-2004-2012","title":"Proline Fixed Damping Coilover kit for Audi A3 (8PA) 2004-2012","description":"\u003cp\u003eDesigned and engineered in the UK exclusively for Stance+, the Proline is a different kind of coilover kit. The base-adjustable front struts physically change length to achieve your ride height rather than simply moving the spring seat, meaning your Audi A3 (8PA) Sportback 2WD and Quattro can run seriously low and still ride properly.\u003c\/p\u003e\n\u003cp\u003eThe Proline achieves its extreme range through a base-adjustable front strut design that other coilover kits simply don't use. Instead of moving the spring seat further down a fixed-length body, the entire strut shortens or lengthens to achieve the target ride height. The practical result is that the piston rod retains 100% of its travel no matter how extreme the drop, keeping ride quality consistent and predictable whether you're running a moderate fast-road setup or fully committed lows.\u003c\/p\u003e\n\u003cp\u003eThe gas-assisted, oil-filled FUCH dampers are tuned approximately 25-30% stiffer than stock. That means noticeably less body roll, sharper turn-in, and a more settled, composed feel whether you're on a fast A-road or threading through town. NOK oil seals keep the dampers healthy for the long run, and the powder coated anti-corrosion bodies maintain their finish through year-round use.\u003c\/p\u003e\n\u003cp\u003eThis kit runs fixed uprated damping, set at approximately 25-30% stiffer than standard. It's a firm, sporty setup tuned specifically for your Audi A3 (8PA) Sportback 2WD and Quattro to deliver the best balance of performance and road comfort at extreme ride heights.\u003c\/p\u003e\n\u003cp\u003eThe Proline's base-adjustable design gives your Audi A3 (8PA) Sportback 2WD and Quattro up to 75mm of drop while keeping 100% damper travel intact, so the suspension system can do its job properly at any ride height.\u003c\/p\u003e\n\u003cp\u003eEverything you need is in the box, including drop links where required. The kit reuses your factory top mounts and bearings, though fitting new ones is always recommended. Copper grease the threaded base and adjuster collars before installation. Have it fitted professionally and get the geometry reset. 2-year unlimited mileage warranty included.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Audi A3 (8PA) (2004-2012) Sportback. 2WD and Quattro. Fitted with the following engines: 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi, 3.2FSi V6, 1.6TDi, 1.9TDi, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640560185682,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"proline-fixed-damping-coilover-kit-audi-a3-8pa-s3-quattro-2006-2012","title":"Proline Fixed Damping Coilover kit for Audi A3 (8PA) S3 Quattro 2006-2012","description":"\u003cp\u003eThe Stance+ Proline Coilover Kit for the Audi A3 S3 (8PA) Sportback Quattro is our flagship suspension upgrade. Unlike conventional coilovers, the front struts are base-adjustable in length, shortening or lengthening the whole unit to hit extreme ride heights while keeping 100% damper travel intact.\u003c\/p\u003e\n\u003cp\u003eWhat makes the Proline different is how it achieves its extreme lowering. Conventional coilover kits move the spring seat to lower the car, which reduces damper travel at lower ride heights and can lead to a harsher, more compromised ride. The Proline takes a different approach: the front strut body itself is adjustable in length, shortening or lengthening to set the ride height while maintaining 100% piston rod travel at all times. You can run it seriously low and still have the full damper stroke working for you.\u003c\/p\u003e\n\u003cp\u003eOn the road, the performance improvement over factory suspension is significant. Gas-assisted, oil-filled FUCH dampers are set approximately 25-30% stiffer than standard, delivering flatter cornering, sharper turn-in, and noticeably better body control. NOK oil seals throughout ensure long-term durability, and the powder coated damper bodies are built to handle whatever the British weather throws at them.\u003c\/p\u003e\n\u003cp\u003eFixed damping is set at around 25-30% above factory specification, tuned to suit the specific weight and geometry of your Audi A3 S3 (8PA) Sportback Quattro. It's a firm, capable setup that strikes the right balance between handling performance and day-to-day usability.\u003c\/p\u003e\n\u003cp\u003eBuilt for drivers who want to improve the look and feel of an already great handling car. The Proline's base-adjustable design gives your A3 S3 (8PA) Sportback Quattro up to 75mm of drop while keeping 100% damper travel intact.\u003c\/p\u003e\n\u003cp\u003eFitting is a direct swap with your factory suspension, reusing OE top mounts and bearings. We always recommend fitting new top mounts. Copper grease the threaded base and collars before fitting. Have the kit installed by a qualified mechanic and get the alignment reset. Drop links included where needed. 2-year warranty as standard.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Proline Ride Height Adjustable Coilover Kit is suitable for: Audi A3 S3 (8PA) (2006-2012) Sportback. Quattro. Fitted with the following engines: 2.0TFSi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640560349522,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"proline-fixed-damping-coilover-kit-audi-tt-8j-2006-2014","title":"Proline Fixed Damping Coilover kit for Audi TT (8J) 2006-2014","description":"\u003cp\u003eWhen standard coilovers won't go low enough, the Stance+ Proline steps in. Base-adjustable in length, the front struts physically shorten or lengthen to achieve your desired ride height, meaning full piston rod travel is maintained no matter how low you run your Audi TT (8J) Coupe and Roadster 2WD and Quattro. Up to 75mm of drop on most applications.\u003c\/p\u003e\n\u003cp\u003eBase adjustment is the Proline's defining feature. Where most coilover kits achieve lowering by repositioning the spring seat, the Proline front struts change in physical length. Shorten the strut to go lower, lengthen it to go higher. The result is that your piston rod always has its full stroke available, giving the suspension system everything it needs to do its job properly at any ride height from 30 to 75mm of drop. Adjustment can be done while the kit is on the car.\u003c\/p\u003e\n\u003cp\u003eUnderneath the Proline's headline drop numbers is a properly specified damper package. Gas-assisted, oil-filled FUCH dampers uprated around 25-30% over standard, with NOK oil seals for durability and FUCH damper oil for consistent lubricity. Chrome silicon springs are shot-peened for strength and powder-coated black. Powder coated damper bodies complete a kit that's engineered to perform and built to last.\u003c\/p\u003e\n\u003cp\u003eFixed damping is set at around 25-30% above factory specification, tuned to suit the specific weight and geometry of your Audi TT (8J) Coupe and Roadster 2WD and Quattro. It's a firm, capable setup that strikes the right balance between handling performance and day-to-day usability.\u003c\/p\u003e\n\u003cp\u003eRunning your Audi TT (8J) on the Proline Coilover Kit is a commitment to the extreme end of the spectrum. Up to 75mm of drop, full damper travel at every height, and a gas-assisted, oil-filled damper package that keeps the ride quality you'd expect from a sports car.\u003c\/p\u003e\n\u003cp\u003eThe kit uses your OE top mounts and bearings. New ones are always worth fitting at the same time. Before installation, copper grease all threaded components. Fitting must be carried out by a qualified technician, with a full alignment reset afterwards. Drop links are included where needed. Backed by a 2-year Stance+ warranty.\u003c\/p\u003e\n\u003cp\u003eKit supplied with 55mm front strut diameters.\u003c\/p\u003e\n\u003cp\u003eThis Stance+ Proline Ride Height Adjustable Coilover Kit is suitable for: Audi TT (8J) (2006-2014) Coupe and Roadster. 2WD and Quattro models. Fitted with the following engines: 1.8TFSi, 2.0TFSi, 2.5TFSi RS, 3.2 V6, 2.0TDi.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52640560513362,"sku":"SPC036B","price":399.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPC036_55B_Box.jpg?v=1787119030"},{"product_id":"shortened-drop-links-audi-a1-8x-2010-2018","title":"Shortened Drop Links for Audi A1 (8X) 2010-2018","description":"\u003cp\u003eIf you know your Audi A1 (8X) is lowered and you need the correct shorter drop link length, the Stance+ Short Drop Links are the right answer. Fixed length, car-specific, zinc plated steel construction, supplied as a pair with mounting bolts. A genuinely simple bolt-on upgrade.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel construction with a zinc plated finish for long-term weather and corrosion resistance. The Stance+ Short Drop Links are built to outlast the factory items they replace, and the fixed length is set specifically to suit the geometry of a lowered car on this particular chassis.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A1 (8X) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, job done.\u003c\/p\u003e\n\u003cp\u003eInstallation takes minutes and the kit comes complete with mounting bolts. Stance+ Short Drop Links are backed by a 1-year warranty. For applications where adjustability is preferred, our Stance+ Adjustable Drop Links range covers the same vehicles.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A1. (8X). (2010-2018). Engines: 1.0TFSi, 1.2TFSi, 1.4TFSi, 1.4TSi, 1.8TFSi, 1.4TDi, 1.6TDi, 2.0TDi. Hatchback. 2WD Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779503954,"sku":"DL1","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl1-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a2-8z-1999-2005","title":"Shortened Drop Links for Audi A2 (8Z) 1999-2005","description":"\u003cp\u003eStance+ Short Drop Links are the simplest fix for the most common lowered-car problem, when the anti-roll bar and driveshaft make contact. Designed with a fixed length specifically for the Audi A2 (8Z), they bolt straight in to replace the factory items, restoring proper anti-roll bar geometry and eliminating knocking, rattling, and premature wear.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel construction, zinc plated against corrosion, supplied as a pair with mounting bolts. Compatible with all types of lowered suspension including coilover kits and lowering spring setups. Standard length factory drop links don't need to be a problem on a lowered car.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A2 (8Z) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, job done.\u003c\/p\u003e\n\u003cp\u003eA simple bolt-on job takes minutes per side. 1-year warranty as standard with every Stance+ Short Drop Link kit. For drivers who want to fine-tune the length to their specific setup, the Stance+ Adjustable and Premium Adjustable kits are both available for this application.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A2. (8Z). (1999-2005). Engines: 1.4, 1.6FSi, 1.2TDi, 1.4TDi. Hatchback. 2WD Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779602258,"sku":"DL1","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl1-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a3-8l-1996-2003","title":"Shortened Drop Links for Audi A3 (8L) 1996-2003","description":"\u003cp\u003eWhen you lower your A3 (8L) 1.8T Quattro \/ 1.8T S3 Quattro, the factory drop links could be too long for the anti-roll bar geometry. The Stance+ Short Drop Links fix this with a fixed shorter length tuned specifically to suit this car. No adjustability needed, just the correct length straight out of the box.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel, zinc plated, supplied as a pair with mounting bolts and tuned to the correct length for a lowered example of this car. Compatible with any lowering setup, from a mild lowering spring kit through to a fully dropped coilover setup.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link kit for the A3 (8L) 1.8T Quattro \/ 1.8T S3 Quattro is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eThe Fixed length design means there's no setup time. Stance+ Short Drop Links are covered by a 1-year warranty. Our adjustable kits are available for the same applications if you'd prefer the flexibility of length-adjustable links.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8L). (1996-2003). Engines: 1.8T. Hatchback. Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779897170,"sku":"DL5","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl5-box.jpg?v=1787117109"},{"product_id":"shortened-drop-links-audi-a3-8l-1999-2003","title":"Shortened Drop Links for Audi A3 (8L) 1999-2003","description":"\u003cp\u003eEngineered specifically for the Audi A3 (8L) 1.9TDi Quattro, these Stance+ Short Drop Links are a Fixed length pair that addresses one of the most common issues with lowered cars: anti-roll bar contact with the driveshaft. A direct-fit upgrade, supplied as a pair with mounting bolts, ready to bolt straight on.\u003c\/p\u003e\n\u003cp\u003eMade from heavy duty steel and zinc plated for British weather, these short drop links use proper joints and hardware throughout. Supplied as a pair with the mounting bolts you need to fit them. No additional parts to source, no surprises during installation.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A3 (8L) 1.9TDi Quattro is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward and should only take a few minutes per side. Backed by a 1-year warranty as standard. If you want the flexibility of an adjustable kit instead, our Stance+ Adjustable Drop Links and Premium Adjustable Drop Links cover the same applications.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8L). (1999-2003). Engines: 1.9TDi. Hatchback. Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779929938,"sku":"DL5","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl5-box.jpg?v=1787117109"},{"product_id":"shortened-drop-links-audi-a3-8p1-2003-2012","title":"Shortened Drop Links for Audi A3 (8P1) 2003-2012","description":"\u003cp\u003eDropped your Audi A3 (8P1) Hatchback 2WD and Quattro 40mm or more and started hearing a tap or knock from the front end? That's your factory drop links struggling. The Stance+ Short Drop Links are a Fixed length, direct-fit replacement engineered specifically for the Audi A3 (8P1) Hatchback 2WD and Quattro putting the anti-roll bar back at the right angle and clearing the driveshaft properly.\u003c\/p\u003e\n\u003cp\u003eBuilt from heavy duty steel with a zinc plated finish that holds up to road salt and weather. The fixed length is engineered specifically for lowered applications of this car, so once they're on you don't need to think about them again.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A3 (8P1) Hatchback 2WD and Quattro is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eEasy to install. The kit is supplied complete with mounting bolts and a 1-year warranty as standard. If your car has had a non-standard suspension setup or you want the flexibility to fine-tune the length, our Stance+ Adjustable Drop Links may suit you better.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8P1). (2003-2012). Engines: 3.2FSi V6, 1.6TDi, 1.9TDi, 2.0TDi, 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8T, 1.8FSi, 1.8TFSi, 2.0FSi, 2.0TFSi. Hatchback. 2WD Models \/ Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779962706,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a3-8p1-2006-2012","title":"Shortened Drop Links for Audi A3 (8P1) 2006-2012","description":"\u003cp\u003eThe Stance+ Short Drop Links for the Audi A3 (8P1) 2.0TFSi S3 Quattro are a Fixed length, car-specific replacement for the longer factory drop links. Designed to suit lowered cars where the standard drop links have become too long, they restore the correct anti-roll bar geometry and eliminate the knocking and tapping noises that come with extended factory hardware.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel construction with a zinc plated finish for long-term weather and corrosion resistance. The Stance+ Short Drop Links are built to outlast the factory items they replace, and the fixed length is set specifically to suit the geometry of a lowered car on this particular chassis.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A3 (8P1) 2.0TFSi S3 Quattro is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eInstallation takes minutes and the kit comes complete with mounting bolts. Stance+ Short Drop Links are backed by a 1-year warranty. For applications where adjustability is preferred, our Stance+ Adjustable Drop Links range covers the same vehicles.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8P1). (2006-2012). Engines: 2.0TFSi S3. Hatchback. Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716779995474,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a3-8p7-2008-2010","title":"Shortened Drop Links for Audi A3 (8P7) 2008-2010","description":"\u003cp\u003eLowered cars sometimes need shorter drop links. This is because some aftermarket performance suspension and coilover manufacturers mount the drop link bracket further down the body of the damper compared to the O.E equivalent. The Stance+ Short Drop Links for the Audi A3 (8P7) are engineered to the correct fixed length for this specific car, removing the guesswork that comes with universal adjustable kits. Pop them on, get the geometry sorted, and the anti-roll bar and driveshaft contact noise goes away.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel construction, zinc plated against corrosion, supplied as a pair with mounting bolts. Compatible with all types of lowered suspension including coilover kits and lowering spring setups. Standard length factory drop links don't need to be a problem on a lowered car.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi A3 (8P7) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eA simple bolt-on job takes minutes per side. 1-year warranty as standard with every Stance+ Short Drop Link kit. For drivers who want to fine-tune the length to their specific setup, the Stance+ Adjustable and Premium Adjustable kits are both available for this application.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8P7). (2008-2010). Engines: 1.6TDi, 1.9TDi, 2.0TDi, 1.2TFSi, 1.4TFSi, 1.6FSi, 1.8TFSi, 2.0FSi, 2.0TFSi. Cabriolet. 2WD Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716780028242,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a3-8pa-2004-2012","title":"Shortened Drop Links for Audi A3 (8PA) 2004-2012","description":"\u003cp\u003eDesigned and engineered in the UK, the Stance+ Short Drop Links are a Fixed length, car-specific solution for the Audi A3 (8PA). Heavy duty steel construction, zinc plated for weather protection, supplied as a pair with mounting bolts. Fitting takes minutes.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel, zinc plated, supplied as a pair with mounting bolts and tuned to the correct length for a lowered example of this car. Compatible with any lowering setup, from a mild lowering spring kit through to a fully dropped coilover setup.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ short drop link kit for the Audi A3 (8PA) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eA few minutes per side and the job is done. The Fixed length design means there's no setup time. Stance+ Short Drop Links are covered by a 1-year warranty. Our adjustable kits are available for the same applications if you'd prefer the flexibility of length-adjustable links.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8PA). (2004-2012). Engines: 1.6TDi, 1.9TDi, 2.0TDi, 2.0TFSi, 3.2FSi V6, 1.2TFSi, 1.4TFSi, 1.6, 1.6FSi, 1.8TFSi, 2.0FSi. Sportback. 2WD Models \/ Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716780061010,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-a3-8pa-2006-2012","title":"Shortened Drop Links for Audi A3 (8PA) 2006-2012","description":"\u003cp\u003eStance+ Short Drop Links for the Audi A3 (8PA) 2.0TFSi S3 Quattro are a pair of Fixed length, direct-fit replacement drop links. They solve the angle and clearance issues that lowering causes, stopping the anti-roll bar contacting the driveshaft and eliminating the noises that worn or over-extended factory items create.\u003c\/p\u003e\n\u003cp\u003eMade from heavy duty steel and zinc plated for British weather, these short drop links use proper joints and hardware throughout. Supplied as a pair with the mounting bolts you need to fit them. No additional parts to source, no surprises during installation.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the A3 (8PA) 2.0TFSi S3 Quattro is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward and should only take a few minutes per side. Backed by a 1-year warranty as standard. If you want the flexibility of an adjustable kit instead, our Stance+ Adjustable Drop Links and Premium Adjustable Drop Links cover the same applications.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi A3. (8PA). (2006-2012). Engines: 2.0TFSi S3. Sportback. Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716780126546,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-tt-8j-2006-2014","title":"Shortened Drop Links for Audi TT (8J) 2006-2014","description":"\u003cp\u003eA factory drop link can be too long for a lowered Audi TT (8J). This is because some aftermarket performance suspension and coilover manufacturers mount the drop link bracket further down the body of the damper compared to the O.E equivalent. The Stance+ Short Drop Links sort it with a fixed shorter length engineered for this specific car, putting the anti-roll bar back where it should be and getting rid of the knocking and tapping you've probably been hearing from the anti-roll bar and driveshaft making contact.\u003c\/p\u003e\n\u003cp\u003eBuilt from heavy duty steel with a zinc plated finish that holds up to road salt and weather. The fixed length is engineered specifically for lowered applications of this car, so once they're on you don't need to think about them again.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link Kit for the Audi TT (8J) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eEasy to install. The kit is supplied complete with mounting bolts and a 1-year warranty as standard. If your car has had a non-standard suspension setup or you want the flexibility to fine-tune the length, our Stance+ Adjustable Drop Links may suit you better.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi TT. (8J). (2006-2014). Engines: 1.8TFSi, 2.0TFSi, 2.5TFSi RS, 3.2 V6, 2.0TDi. Coupe \u0026amp; Roadster. 2WD Models \/ Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716780159314,"sku":"DL7","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl7-box.jpg?v=1787119029"},{"product_id":"shortened-drop-links-audi-tt-8n3-8n9-1998-2006","title":"Shortened Drop Links for Audi TT (8N3\/8N9) 1998-2006","description":"\u003cp\u003eIf you know your Audi TT (8N3\/8N9) is lowered and you need the correct shorter drop link length, the Stance+ Short Drop Links are the right answer. Fixed length, car-specific, zinc plated steel construction, supplied as a pair with mounting bolts. A genuinely simple bolt-on upgrade.\u003c\/p\u003e\n\u003cp\u003eHeavy duty steel construction with a zinc plated finish for long-term weather and corrosion resistance. The Stance+ Short Drop Links are built to outlast the factory items they replace, and the fixed length is set specifically to suit the geometry of a lowered car on this particular chassis.\u003c\/p\u003e\n\u003cp\u003eFixed length short drop links suit drivers who want the correct length supplied straight out of the box. The Stance+ Short Drop Link kit for the Audi TT (8N3\/8N9) is car-specific, so the length is matched to the lowered geometry of this car. Pair them up, bolt them on, done.\u003c\/p\u003e\n\u003cp\u003eInstallation takes minutes and the kit comes complete with mounting bolts. Stance+ Short Drop Links are backed by a 1-year warranty. For applications where adjustability is preferred, our Stance+ Adjustable Drop Links range covers the same vehicles.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ Short \/ Shortened Heavy Duty Drop Links are suitable for: Audi TT. (8N3\/8N9). (1998-2006). Engines: 1.8T, 3.2V6. Coupe \u0026amp; Roadster. 2WD Models \/ Quattro Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52716780192082,"sku":"DL5","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/stance-dl5-box.jpg?v=1787117109"},{"product_id":"adjustable-length-drop-links-audi-a3-8l-1996-2002","title":"Adjustable Length Drop Links for Audi A3 (8L) 1996-2002","description":"\u003cp\u003eThe Stance+ Adjustable Drop Links are the right choice when you need flexibility. For the Audi A3 (8L) 2WD Model, this 2-piece kit gives you a 120mm to 165mm adjustment range, allowing you to set the precise length your specific setup needs. The kit allows you to lengthen the drop link, pushing it away from the driveshaft.\u003c\/p\u003e\n\u003cp\u003eBuild-your-own-length design means you set the drop link to the exact dimension your suspension setup needs. Zinc plated steel components throughout.\u003c\/p\u003e\n\u003cp\u003eWhy choose adjustable over fixed length? You get full control over the geometry of your Audi A3 (8L) 2WD. The recommended setup procedure is to fit the drop links with the car on the ground, then adjust each side so the anti-roll bar sits naturally without any pre-load. This is the only way to get optimal anti-roll bar performance on a heavily modified suspension setup.\u003c\/p\u003e\n\u003cp\u003eInstallation takes just a few minutes once you've worked out the length. 1-year warranty included. For the heavier-duty alternative with uprated ball joints and anodised parts, the Stance+ Premium Adjustable Drop Links cover the same vehicles.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ 2-Piece Adjustable Length Drop Links are suitable for: Audi A3. (8L). (1996-2002). Engines: 1.6, 1.8, 1.8T, 1.9TDi. Hatchback. 2WD Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52731519992146,"sku":"DL120165","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/DL120165-box.jpg?v=1787118669"},{"product_id":"premium-adjustable-length-drop-links-audi-a1-8x-2010-2018","title":"Premium Adjustable Length Drop Links for Audi A1 (8X) 2010-2018","description":"\u003cp\u003eA 10-piece heavy duty kit covering 150mm to 320mm of bolt-to-bolt adjustment. The Stance+ Premium Adjustable Drop Links for the Audi A1 (8X) use uprated ball joints and anodised hardware to deliver our best-quality drop link solution, built to outlast the rest.\u003c\/p\u003e\n\u003cp\u003eUprated ball joints, anodised hardware, zinc plated steel. The Premium kit is built tougher in every component compared to the standard adjustable range. Same 150mm to 320mm adjustment range, same M10 and M12 bolt compatibility, with the heavier-duty hardware that justifies the step up.\u003c\/p\u003e\n\u003cp\u003eFor an Audi A1 (8X) that’s used for fast road or track, the Stance+ Premium Adjustable Length Drop Link Kit is the best option. The heavier duty ball joints don't develop the play that a budget kit can after a season or two, and the corrosion protection is properly engineered. A very robust, fit and forget kit, engineered to last.\u003c\/p\u003e\n\u003cp\u003eInstallation is a quick job. The Premium kit comes complete with everything needed for a clean fit. Backed by a 1-year warranty as standard. For applications where the standard adjustable kit suffices, the Stance+ Adjustable Drop Links are also available for the same vehicle range.\u003c\/p\u003e\n\u003cp\u003eThese Stance+ 10-Piece Premium Adjustable Length Drop Links are suitable for: Audi A1. (8X). (2010-2018). Engines: 1.0TFSi, 1.2TFSi, 1.4TFSi, 1.4TSi, 1.8TFSi, 1.4TDi, 1.6TDi, 2.0TDi. Hatchback. 2WD Models.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":52738210922834,"sku":"SPDL150320","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/SPDL150320-box.jpg?v=1787118850"}],"url":"https:\/\/stanceplus.com\/collections\/audi.oembed?page=2","provider":"STANCE+","version":"1.0","type":"link"}