{"title":"5x120 (Car) PCD Adapters","description":"","products":[{"product_id":"5x120-65-1-car-to-5x112-57-1-wheel-20mm-stance-pcd-adapters","title":"5x120 65.1 (Car) to 5x112 57.1 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eStance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 20mm kit converts a 5x120 (65.1) c\/bore car\/van to 5x112 (57.1) c\/bore wheel and is a popular conversion for VW commercial owners. Many VW Transporter T5 and T6 owners want to run Audi, Mercedes-Benz or Volkswagen Group 5x112 wheels on their vans. The adapter handles the centre bore change from 65.1mm to 57.1mm, ensuring a clean and precise fitment. Suitable for owners of the VW Transporter T5\/T5.1\/T6\/T6.1 (T26\/T28\/T30\/T32) chassis and VW Amarok wanting to fit (VAG Group) VW\/Audi\/Seat\/Skoda wheels onto their commercial vehicles.\u003c\/p\u003e\n\u003cp\u003eEvery adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver, chosen because it sits far more discreetly behind your alloys than the black finish used by many competing brands. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. The kit is supplied as a pair with all necessary adapter mounting hardware included.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ PCD adapter bolts to your vehicle's wheel hub using the bolts provided. Your chosen wheels then bolt to the adapter using the original bolts that came with those wheels. The design means the adapter is completely hidden behind the wheel once fitted. It is important to check that your wheel bolts do not protrude through the back of the adapter before final assembly.\u003c\/p\u003e\n\u003cp\u003eClean the hub surface thoroughly before fitting, using a wire brush to remove any scale, rust or debris. Apply copper grease sparingly to the hub face to prevent corrosion and make future removal easier. Tighten all bolts progressively to the recommended torque specification. Stance+ recommends that all PCD adapters are installed by a qualified vehicle mechanic or trained vehicle technician to ensure a safe and correct fit.\u003c\/p\u003e\n\u003cp\u003eImportant fitment note: With 20mm adapters, it is essential to test fit against the back of the wheel before mounting on the car. The wheel bolts you are using may protrude through the back face of the adapter depending on bolt length and wheel design. If they do, the bolts must be shortened before use. Wheel bolts are not included in this kit. Maximum recommended torque for wheel bolts is 110 NM. If in doubt, please call us for advice.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658514770,"sku":"20-51205112-571","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x120-5x112.jpg?v=1787117230"},{"product_id":"5x120-65-1-car-to-5x112-57-1-wheel-25mm-stance-pcd-adapters","title":"5x120 65.1 (Car) to 5x112 57.1 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eAchieving the right stance starts with the right adapter. This Stance+ 25mm PCD Wheel Hub Adapter kit converts your 5x120 (65.1) c\/bore car to a 5x112 (57.1) c\/bore wheel fitment, making it a popular conversion for VW Transporter T5 and T6 owners wanting to run Audi, Mercedes-Benz or Volkswagen Group 5x112 (57.1) c\/bore wheels on their vans. The adapter handles the centre bore change from 65.1mm to 57.1mm, ensuring a clean and precise fitment. A very popular conversion in the Transporter community. Suitable for owners of the VW Transporter T5\/T5.1\/T6\/T6.1 (T26\/T28\/T30\/T32) chassis and VW Amarok wanting to fit (VAG Group) VW\/Audi\/Seat\/Skoda wheels onto their commercial vehicles.\u003c\/p\u003e\n\u003cp\u003eStance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.\u003c\/p\u003e\n\u003cp\u003eStart by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 25mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658613074,"sku":"25-51205112-571","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x120-5x112.jpg?v=1787117231"},{"product_id":"5x120-65-1-car-to-5x130-71-6-wheel-20mm-stance-pcd-adapters","title":"5x120 65.1 (Car) to 5x130 71.6 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a VW Transporter T5 and T6 5x120 (65.1) c\/bore van to a 5x130 (71.6) c\/bore Porsche wheel fitment. Supplied as a pair of PCD Adapters in a 20mm width per side. This is a specialist conversion for VW commercial owners looking to fit Porsche specification 5x130 wheels onto their vans. Both the PCD and centre bore changes are handled by the adapter, making this a clever solution for a tricky fitment challenge. Suitable for owners of the VW Transporter T5\/T5.1\/T6\/T6.1 (T26\/T28\/T30\/T32) chassis and VW Amarok wanting to fit Porsche wheels onto their commercial vehicles.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 20mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658907986,"sku":"20-51205130-571","price":62.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x120-5x130.jpg?v=1787117230"},{"product_id":"5x120-65-1-car-to-5x130-71-6-wheel-25mm-stance-pcd-adapters","title":"5x120 65.1 (Car) to 5x130 71.6 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run 5x130 wheels on a vehicle with a 5x120 65.1 hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a specialist conversion for BMW owners looking to fit Porsche-specification 5x130 wheels. Both the PCD and centre bore changes are handled by the adapter, making this an elegant solution for a tricky fitment challenge.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair with 25mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs. The 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187659006290,"sku":"25-51205130-571","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x120-5x130.jpg?v=1787117230"}],"url":"https:\/\/stanceplus.com\/collections\/5x120-car-pcd-adapters.oembed","provider":"STANCE+","version":"1.0","type":"link"}