{"title":"5x112 (Car) PCD Adapters","description":"","products":[{"product_id":"5x112-57-1-car-to-5x100-57-1-wheel-20mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x100 57.1 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x112 (57.1) c\/bore car to a 5x100 (57.1) c\/bore wheel fitment, supplied as a pair of adapters in a 20mm per side width. This is a useful reverse conversion for those wanting to run the older (VAG) VW\/Audi group 5x100 wheels on a newer (VAG) VW\/Audi group 5x112 vehicle. Very popular with customers fitting older Volkswagen or Seat alloys to a newer Audi, Mercedes-Benz or Volkswagen Group car.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 20mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657957714,"sku":"20-51125100-571","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x112-5x100.jpg?v=1787117230"},{"product_id":"5x112-57-1-car-to-5x100-57-1-wheel-25mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x100 57.1 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run 5x100 (57.1) c\/bore wheels on a vehicle with a 5x112 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a useful reverse conversion for those wanting to run the older VW\/Audi\/Seat\/Skoda group or similar 5x100 wheels on a newer VW\/Audi\/Seat\/Skoda 5x112 vehicle, such as fitting older Volkswagen or Seat alloys to a newer Audi, Mercedes-Benz or Volkswagen Group car. A very popular conversion in the VW scene and one of our more popular PCD conversion kits.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair with 25mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 25mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657990482,"sku":"25-51125100-571","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x112-5x100.jpg?v=1787117230"},{"product_id":"5x112-57-1-car-to-5x120-72-5-wheel-15mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x120 72.5 (Wheel) 15mm STANCE+ PCD Adapters","description":"\u003cp\u003eStance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 15mm kit converts a 5x112 57.1 car fitment to 5x120 72.5, and is a popular conversion for fitting BMW 5x120 wheels to Audi, Mercedes-Benz or Volkswagen Group vehicles. The centre bore is correctly converted from 57.1mm to 72.5mm within the adapter, giving a precise and secure fitment without the need for spigot rings.\u003c\/p\u003e\n\u003cp\u003eEvery adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. At 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to exactly the same exacting standard as the wider variants.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658056018,"sku":"15-51125120-725","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/15-5x112-5x120_b14e471a-717d-40d5-8abe-ba821f51058e.jpg?v=1787117230"},{"product_id":"5x112-57-1-car-to-5x120-72-5-wheel-20mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x120 72.5 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eAchieving the right stance starts with the right adapter. This Stance+ 20mm PCD Wheel Hub Adapter kit converts your 5x112 (57.1) c\/bore car to a 5x120 (72.5) wheel fitment, making it a popular conversion for customers fitting BMW specification 5x120 wheels to Audi, Mercedes-Benz or Volkswagen Group vehicles running a 5x112 (57.1) c\/bore hub. The centre bore is correctly converted from 57.1mm to 72.5mm within the adapter, giving a precise and secure fitment without the need for spigot rings. One of our most popular PCD hub conversion kits.\u003c\/p\u003e\n\u003cp\u003eStance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.\u003c\/p\u003e\n\u003cp\u003eStart by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 20mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658154322,"sku":"20-51125120-725","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x112-5x120.jpg?v=1787117230"},{"product_id":"5x112-57-1-car-to-5x130-71-6-wheel-15mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x130 71.6 (Wheel) 15mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x112 (57.1) c\/bore car to a 5x130 (71.6) c\/bore Porsche wheel fitment, supplied as a pair in 15mm width per side. This is an excellent choice for those wanting to run Porsche specification 5x130 wheels on a newer Audi, Mercedes-Benz or Volkswagen Group car, providing access to one of the most desirable wheel fitments available. Extremely popular in the VW\/Audi scene where Porsche wheels on a Golf looks simply awesome.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to the same exacting standard as the wider variants.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 15mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658252626,"sku":"15-51125130-716","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/15-5x112-5x130.jpg?v=1787117230"},{"product_id":"5x112-57-1-car-to-5x130-71-6-wheel-20mm-stance-pcd-adapters","title":"5x112 57.1 (Car) to 5x130 71.6 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run 5x130 (71.6) c\/bore Porsche specification wheels on a vehicle with a 5x112 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is an excellent choice for those wanting to run expensive Porsche specification 5x130 wheels on a modern Audi, Mercedes-Benz or Volkswagen Group car, providing the VW\/Audi group of owners access to one of the most desirable wheel fitments available.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair with 20mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 20mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187658318162,"sku":"20-51125130-716","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x112-5x130.jpg?v=1787117230"}],"url":"https:\/\/stanceplus.com\/collections\/5x112-car-pcd-adapters.oembed","provider":"STANCE+","version":"1.0","type":"link"}