{"title":"5x100 (Car) PCD Adapters","description":"","products":[{"product_id":"5x100-57-1-car-to-5x112-57-1-wheel-15mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x112 57.1 (Wheel) 15mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x100 (57.1) c\/bore car fitment to a newer 5x112 (57.1) c\/bore wheel fitment, supplied as a pair in a 15mm width per side. Popular with VW\/Audi group enthusiasts that want to fit newer 5x112 wheels to their older 5x100 cars. This is one of the most popular conversions in the Stance+ range, also allowing Mercedes-Benz or newer Seat and Skoda 5x112 wheels to be fitted to vehicles running the common 5x100 bolt pattern found on many older VW\/Audi, Seat, Skoda and Subaru models.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to the same exacting standard as the wider variants.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 15mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656483154,"sku":"15-51005112-571","price":62.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/15-5x100-5x112.jpg?v=1787117289"},{"product_id":"5x100-57-1-car-to-5x112-57-1-wheel-20mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x112 57.1 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run VW\/Audi group 5x112 (57.1) c\/bore wheels on a vehicle with a 5x100 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This is one of the most popular conversions in the Stance+ range, allowing new style Audi, Mercedes-Benz or Volkswagen Group 5x112 (57.1) c\/bore wheels to be fitted to vehicles running the older 5x100 (57.1) c\/bore bolt pattern found on many earlier Volkswagen, Seat and Subaru models.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair in 20mm width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 20mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656548690,"sku":"20-51005112-571","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x100-5x112.jpg?v=1787117289"},{"product_id":"5x100-57-1-car-to-5x120-72-5-wheel-15mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x120 72.5 (Wheel) 15mm STANCE+ PCD Adapters","description":"\u003cp\u003eStance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 15mm kit converts a VW\/Audi group or similar 5x100 (57.1) c\/bore car to a 5x120 (72.5) c\/bore BMW or similar fitment. A very popular conversion for anyone wanting to fit BMW style 5x120 wheels to an older VW\/Audi group or similar 5x100 vehicle. The centre bore change from 57.1 to 72.5 is handled precisely by the adapter, ensuring a tight, vibration-free fit.\u003c\/p\u003e\n\u003cp\u003eEvery adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver, chosen because it sits far more discreetly behind your alloys than the black finish used by many competing brands. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. The kit is supplied as a pair with all necessary adapter mounting hardware included.\u003c\/p\u003e\n\u003cp\u003eAt 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to the same exacting standard as the wider variants.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ PCD adapter bolts to your vehicle's wheel hub using the bolts provided. Your chosen wheels then bolt to the adapter using the original bolts that came with those wheels. The design means the adapter is completely hidden behind the wheel once fitted. It is important to check that your wheel bolts do not protrude through the back of the adapter before final assembly.\u003c\/p\u003e\n\u003cp\u003eClean the hub surface thoroughly before fitting, using a wire brush to remove any scale, rust or debris. Apply copper grease sparingly to the hub face to prevent corrosion and make future removal easier. Tighten all bolts progressively to the recommended torque specification. Stance+ recommends that all PCD adapters are installed by a qualified vehicle mechanic or trained vehicle technician to ensure a safe and correct fit.\u003c\/p\u003e\n\u003cp\u003eImportant fitment note: With 15mm adapters, it is essential to test fit against the back of the wheel before mounting on the car. The wheel bolts you are using may protrude through the back face of the adapter depending on bolt length and wheel design. If they do, the bolts must be shortened before use. Wheel bolts are not included in this kit. Maximum recommended torque for wheel bolts is 110 NM. If in doubt, please call us for advice.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656646994,"sku":"15-51005120-725","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/15-5x100-5x120.jpg?v=1787117289"},{"product_id":"5x100-57-1-car-to-5x120-72-5-wheel-20mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x120 72.5 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eAchieving the right stance starts with the right adapter. This Stance+ 20mm PCD Wheel Hub Adapter kit converts your VW\/Audi group or similar 5x100 (57.1) c\/bore car fitment to a BMW 5x120 (72.5) c\/bore wheel fitment, making it a well-suited conversion for anyone wanting to fit BMW style 5x120 (72.5) c\/bore wheels to a 5x100 (57.1) c\/bore vehicle. The centre bore change from 57.1 to 72.5 is handled precisely by the adapter, ensuring a precise, vibration free fit.\u003c\/p\u003e\n\u003cp\u003eStance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.\u003c\/p\u003e\n\u003cp\u003eStart by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 20mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656745298,"sku":"20-51005120-725","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x100-5x120.jpg?v=1787117289"},{"product_id":"5x100-57-1-car-to-5x120-72-5-wheel-25mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x120 72.5 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x100 (57.1) c\/bore car fitment to a 5x120 (72.5) c\/bore wheel fitment, supplied as a pair with a 25mm width per side. This is a well suited conversion for anyone wanting to fit BMW style 5x120 (72.5) c\/bore wheels to an older VW\/Audi group or similar 5x100 (57.1) c\/bore vehicle. The centre bore change from 57.1 to 72.5 is handled precisely by the adapter, ensuring a precise, vibration free fit.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 25mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656843602,"sku":"25-51005120-725","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x100-5x120.jpg?v=1787117289"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-15mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 15mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run Porsche 5x130 (71.6) c\/bore wheels on a vehicle with a 5x100 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the 5x100 bolt pattern. Very popular in the VW\/Audi group of enthusiasts that run Porsche wheels on their older 5x100 VW\/Audi\/Seat\/Skoda models. With a range of widths available, this adapter gives you the flexibility to dial in exactly the perfect fitment and stance you are after.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair of adapters with 15mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eAt 15mm per side, this is one of the slimmer options in the Stance+ range, making it an excellent choice where fitment space is limited or where you simply need the PCD and centre bore conversion without adding significant offset. Despite its slim profile, it is built to the same exacting standard as the wider variants.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 15mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187656941906,"sku":"15-51005130-716","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/15-5x100-5x130.jpg?v=1787117231"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-20mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eStance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 20mm kit converts a 5x100 (57.1) c\/bore car to a Porsche 5x130 (71.6) c\/bore, and is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the older 5x100 bolt pattern. Very popular in the VW scene where many enthusiasts run Porsche wheels on their older 5x100 VW\/Audi\/Seat and Skoda models. With a range of widths available, this adapter gives you the flexibility to dial in exactly the wheel fitment and stance you are after.\u003c\/p\u003e\n\u003cp\u003eEvery adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver, chosen because it sits far more discreetly behind your alloys than the black finish used by many competing brands. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. The kit is supplied as a pair with all necessary adapter mounting hardware included.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ PCD adapter bolts to your vehicle's wheel hub using the bolts provided. Your chosen wheels then bolt to the adapter using the original bolts that came with those wheels. The design means the adapter is completely hidden behind the wheel once fitted. It is important to check that your wheel bolts do not protrude through the back of the adapter before final assembly.\u003c\/p\u003e\n\u003cp\u003eClean the hub surface thoroughly before fitting, using a wire brush to remove any scale, rust or debris. Apply copper grease sparingly to the hub face to prevent corrosion and make future removal easier. Tighten all bolts progressively to the recommended torque specification. Stance+ recommends that all PCD adapters are installed by a qualified vehicle mechanic or trained vehicle technician to ensure a safe and correct fit.\u003c\/p\u003e\n\u003cp\u003eImportant fitment note: With 20mm adapters, it is essential to test fit against the back of the wheel before mounting on the car. The wheel bolts you are using may protrude through the back face of the adapter depending on bolt length and wheel design. If they do, the bolts must be shortened before use. Wheel bolts are not included in this kit. Maximum recommended torque for wheel bolts is 110 NM. If in doubt, please call us for advice.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657007442,"sku":"20-51005130-716","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x100-5x130.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-25mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eAchieving the right stance starts with the right PCD adapter. This Stance+ 25mm PCD Wheel Hub Adapter kit converts your 5x100 (57.1) c\/bore car to a 5x130 (71.6) c\/bore Porsche wheel fitment, making it a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the older 5x100 (57.1) c\/bore bolt pattern. We sell hundreds of these PCD adapters every year, mainly to the fanatical VW\/Audi group owners that run Porsche wheels on their lowered and modified cars. With a range of widths available, this adapter gives you the flexibility to dial in exactly the fitment and stance you are after.\u003c\/p\u003e\n\u003cp\u003eStance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.\u003c\/p\u003e\n\u003cp\u003eStart by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 25mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657171282,"sku":"25-51005130-716","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x100-5x130.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-30mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 30mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x100 (57.1) c\/bore car to a 5x130 (71.6) c\/bore wheel fitment, supplied as a pair with a 30mm width per side. This is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the older VW\/Audi group or similar 5x100 (57.1) c\/bore bolt pattern. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance and fitment you are after.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 30mm per side, this adapter starts to push the wheel out to give a more pronounced stance. It works particularly well on vehicles with standard suspension where a little extra track width adds to both the look and the feel of the car without requiring significant geometry adjustment. Also used on Porsche wheels with a higher offset.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 30mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657269586,"sku":"30-51005130-716","price":69.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/30-5x100-5x130.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-35mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 35mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run 5x130 (71.6) c\/bore Porsche wheels on an older vehicle with a 5x100 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is a highly sought-after conversion allowing Porsche specification 5x130 (71.6) c\/bore wheels to be fitted to VW\/Audi group or similar vehicles running the 5x100 (57.1) c\/bore bolt pattern. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance you are after. Very popular in the VW\/Audi scene where Porsche wheel conversions are a very popular modification.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair with 35mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eThe 35mm width is firmly in performance stance territory, pushing the wheel out to fill the arch and achieve a more aggressive look. At this width you should check that your wheel and tyre combination clears your arch liner and suspension components before fitting. Also popular with high offset Porsche wheels where brake caliper and inner arch clearance is necessary.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 35mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657302354,"sku":"35-51005130-716","price":74.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/35-5x100-5x130.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-40mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 40mm STANCE+ PCD Adapters","description":"\u003cp\u003eStance+ PCD Wheel Hub Adapters are trusted by enthusiasts across the world for their precise engineering, consistent quality and great value. This 40mm kit converts a 5x100 (57.1) c\/bore car to a 5x130 (71.6) c\/bore and is a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to older VW\/Audi group or similar vehicles running the 5x100 (57.1) c\/bore hubs. A very popular modification in the VW\/Audi\/Seat\/Skoda Tuning and Styling scene. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance and fitment you are after.\u003c\/p\u003e\n\u003cp\u003eEvery adapter in the Stance+ range is CNC machined from billet T6061 aircraft grade aluminium and finished in anodised matt silver, chosen because it sits far more discreetly behind your alloys than the black finish used by many competing brands. Steel helicoil inserts are incorporated on most applications to provide additional thread strength and long-term reliability. The kit is supplied as a pair with all necessary adapter mounting hardware included.\u003c\/p\u003e\n\u003cp\u003eAt 40mm per side, this is one of the wider options in the Stance+ PCD adapter range and is designed for those wanting a truly aggressive stance. At this width it is important to ensure you have sufficient arch clearance and that your suspension geometry is set up correctly to accommodate the additional track width. Also popular with very high offset Porsche wheels where brake caliper and inner arch clearance is essential.\u003c\/p\u003e\n\u003cp\u003eThe Stance+ PCD adapter bolts to your vehicle's wheel hub using the bolts provided. Your chosen wheels then bolt to the adapter using the original bolts that came with those wheels. The design means the adapter is completely hidden behind the wheel once fitted. It is important to check that your wheel bolts do not protrude through the back of the adapter before final assembly.\u003c\/p\u003e\n\u003cp\u003eClean the hub surface thoroughly before fitting, using a wire brush to remove any scale, rust or debris. Apply copper grease sparingly to the hub face to prevent corrosion and make future removal easier. Tighten all bolts progressively to the recommended torque specification. Stance+ recommends that all PCD adapters are installed by a qualified vehicle mechanic or trained vehicle technician to ensure a safe and correct fit.\u003c\/p\u003e\n\u003cp\u003eImportant fitment note: With 40mm adapters, it is essential to test fit against the back of the wheel before mounting on the car. The wheel bolts you are using may protrude through the back face of the adapter depending on bolt length and wheel design. If they do, the bolts must be shortened before use. Wheel bolts are not included in this kit. Maximum recommended torque for wheel bolts is 110 NM. If in doubt, please call us for advice.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657400658,"sku":"40-51005130-716","price":84.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/40-5x100-5x130.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x130-71-6-wheel-45mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x130 71.6 (Wheel) 45mm STANCE+ PCD Adapters","description":"\u003cp\u003eAchieving the right stance starts with the right adapter. This Stance+ 45mm PCD Wheel Hub Adapter kit converts your 5x100 (57.1) c\/bore car fitment to a 5x130 (71.6) c\/bore wheel fitment, making it a highly sought-after conversion allowing Porsche specification 5x130 wheels to be fitted to vehicles running the 5x100 bolt pattern fitted to early VW\/Audi\/Seat\/Skoda and similar group vehicles. With a range of widths available, this adapter gives you the flexibility to dial in exactly the stance you are after.\u003c\/p\u003e\n\u003cp\u003eStance+ has been producing PCD adapters to a consistently high standard for years, and these are no exception. CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications, each adapter is precision engineered for a perfect fit with no vibration or play. The anodised matt silver finish is a deliberate design choice, blending cleanly with the colour of your wheel hubs rather than drawing attention like the black-finished versions offered by some competitors.\u003c\/p\u003e\n\u003cp\u003eAt 45mm per side, this is one of the wider options in the Stance+ PCD adapter range and is designed for those wanting a truly aggressive stance. At this width it is important to ensure you have sufficient arch clearance and that your suspension geometry is set up correctly to accommodate the additional track width. Also popular with particularly wide Porsche wheels with very high offsets where brake caliper and inner arch clearance is essential.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly onto your wheel hub using the mounting bolts that are supplied as part of the kit. Your new wheels are then attached to the adapter using the wheel bolts that came with those wheels. The setup is clean and secure, with the adapter concealed behind the wheel once everything is assembled and torqued up. We recommend re-checking the torque on all bolts after your first drive.\u003c\/p\u003e\n\u003cp\u003eStart by cleaning the hub face with a wire brush to ensure a clean, flat mating surface. Apply a small amount of copper grease to prevent the adapter from bonding to the hub over time and to help resist corrosion. All bolts should be torqued to the factory-specified settings for your vehicle. As with all suspension and wheel components, Stance+ strongly recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: Before bolting the adapter to your car, always test fit it against the back of the wheel. With 45mm adapters it is possible that the wheel bolts, depending on their length, may protrude through the back of the adapter. If this is the case, they will need to be shortened. Wheel bolts are not supplied with this kit. The maximum torque setting for wheel bolts is 110 NM. Please get in touch if you are unsure about any aspect of fitment before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657498962,"sku":"45-51005130-716","price":94.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/45-5x100-5x130.jpg?v=1787117231"},{"product_id":"5x100-57-1-car-to-5x114-3-60-1-wheel-20mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x114.3 60.1 (Wheel) 20mm STANCE+ PCD Adapters","description":"\u003cp\u003eThese Stance+ PCD Wheel Hub Adapters are designed to convert a 5x100 (57.1) c\/bore car fitment to a 5x114.3 (60.1) c\/bore wheel fitment, supplied as a pair of 20mm per side PCD adapters. This is an increasingly popular conversion allowing wheels from Japanese manufacturers such as Honda, Nissan, Toyota and Mazda to be fitted to older vehicles such as VW\/Audi\/Seat\/Skoda and similar group vehicles running the 5x100 (57.1) c\/bore bolt pattern, bridging the gap between two of the most common 5 stud patterns.\u003c\/p\u003e\n\u003cp\u003eStance+ PCD Wheel Hub Adapters have built a reputation worldwide for their precise fit, outstanding quality and excellent value. Each adapter is CNC machined from billet T6061 aircraft grade aluminium and finished in an anodised matt silver coating that blends naturally with your wheel hubs, rather than the black finish used by some other brands which can scratch and look unsightly behind your alloys.\u003c\/p\u003e\n\u003cp\u003eAt 20mm per side, this adapter offers a practical balance between a clean, close fitment and enough width to clear most standard brake caliper setups. It is one of the most popular widths in the Stance+ PCD adapter range, suitable for a wide variety of applications.\u003c\/p\u003e\n\u003cp\u003eThe adapter bolts directly to your existing wheel hub using the mounting bolts included in the kit. Your new wheels then bolt to the adapter using the original bolts that came with those wheels. The whole assembly sits flush behind the wheel once fitted, giving a clean and professional finish. The adapter mounting bolts must be torqued to factory specifications, and we recommend re-checking torque after the first 50 miles of driving.\u003c\/p\u003e\n\u003cp\u003eBefore fitting, clean the hub face thoroughly with a wire brush to remove any rust, dirt or debris. Apply a thin layer of copper grease to the hub face to prevent the adapter from seizing and to protect against corrosion. Tighten all bolts to the manufacturer's recommended torque settings. We strongly recommend that all Stance+ PCD adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003eImportant: When using a 20mm bolt-on style PCD adapter, always test fit the adapter against the back of the wheel before bolting it to your hub. Check that the wheel bolts do not protrude through the back face of the adapter. If they do, the bolts will need to be shortened before fitting. New wheel bolts are not supplied with this kit. Maximum torque for wheel bolts is 110 NM. If you are unsure about any aspect of fitment, please contact us before ordering.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657564498,"sku":"20-510051143-601","price":62.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/20-5x100-5x114-3.jpg?v=1787117230"},{"product_id":"5x100-57-1-car-to-5x114-3-60-1-wheel-25mm-stance-pcd-adapters","title":"5x100 57.1 (Car) to 5x114.3 60.1 (Wheel) 25mm STANCE+ PCD Adapters","description":"\u003cp\u003eIf you are looking to run 5x114.3 (60.1) c\/bore wheels on a vehicle with a 5x100 (57.1) c\/bore hub, these Stance+ PCD Wheel Hub Adapters are exactly what you need. This conversion is an increasingly popular conversion allowing wheels from Japanese manufacturers such as Honda, Nissan, Toyota and Mazda to be fitted to vehicles running the 5x100 (57.1) c\/bore bolt pattern, bridging the gap between two of the most common 5 stud patterns. Commonly used by many customers with VW\/Audi\/Seat\/Skoda and similar cars fitted with the older 5x100 (57.1) c\/bore hubs. These adapters allow you to run various Japanese wheels that use the 5x114.3 (60.1) c\/bore PCD.\u003c\/p\u003e\n\u003cp\u003eSupplied as a pair with 25mm of width per side, the adapters are CNC machined from billet T6061 aircraft grade aluminium with steel helicoil inserts on most applications for added strength. The anodised matt silver finish is chosen specifically to complement the colour of your wheel hubs rather than stand out behind your alloys like the black-finished alternatives from other brands.\u003c\/p\u003e\n\u003cp\u003eThe 25mm width sits in the sweet spot of the Stance+ range, giving a noticeable improvement in wheel stance whilst remaining compatible with standard suspension geometry on most vehicles. It is a popular choice for those wanting a subtle but purposeful look.\u003c\/p\u003e\n\u003cp\u003eFitting is straightforward. The adapter bolts to your wheel hub using the supplied mounting bolts, and your new wheels bolt to the adapter using the original wheel bolts that came with those wheels. The original hub bolts used to fit the adapter are included in the kit. Once fitted and torqued correctly, the adapter sits neatly behind the wheel with no visible hardware.\u003c\/p\u003e\n\u003cp\u003ePrepare the hub surface with a wire brush to ensure it is clean and flat before fitting. A small amount of copper grease applied to the hub face will help prevent the adapter from seizing and protect against rust over time. All bolts should be tightened to the vehicle manufacturer's specified torque settings. For safety reasons we recommend that these adapters are fitted by a qualified vehicle mechanic or trained vehicle technician.\u003c\/p\u003e\n\u003cp\u003ePlease note: Always test fit the adapter against the back of your wheel before bolting it to the hub. This is particularly important with 25mm adapters, as the wheel bolts may protrude through the back face depending on your specific wheel and bolt combination. If the bolts protrude, they must be shortened prior to fitting. Wheel bolts are not included. Maximum torque for wheel bolts: 110 NM. Contact us if you need advice on your specific fitment.\u003c\/p\u003e","brand":"STANCE+","offers":[{"title":"Default Title","offer_id":53187657728338,"sku":"25-510051143-601","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1030\/7701\/9986\/files\/25-5x100-5x114-3.jpg?v=1787117230"}],"url":"https:\/\/stanceplus.com\/collections\/5x100-car-pcd-adapters.oembed","provider":"STANCE+","version":"1.0","type":"link"}